Cecotec Conga WinDroid 980 Connected Bedienungsanleitung

myRobotcenter

The expert for robots in your home

With one click to the online shop

myRobotcenter.eu myRobotcenter.co.uk

980 CONNECTED

Robot limpiacristales / Robot window cleaner

Manual de instrucciones

Instruction manual

Manuel d’instructions

Bedienungsanleitung

Manuale di istruzioni

Manual de instruções

Handleiding

Instrukcja obsługi

Návod k použití

SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance.

Keep this instruction manual for future reference or new users.

The appliance must be used in accordance with the directions

in this instruction manual. Cecotec cannot be held liable or

responsible for damaged or injuries caused by improper use.

The appliance is not intended to be operated by means of an

external timer or separate remote-control system.

Do not use the appliance in extremely hot orcold environments

(below 0 º/32 °F or above 40º /104 °F).

Please ensure the appliance is plugged in while cleaning. The

appliance has a back-up battery that must be charged before

being used. The back-up battery will supply energy to the

appliance if it is unplugged or the electricity fails.

Do not leave the appliance unattended when it is plugged in.

For household and indoor use only. Do not use the appliance in

commercial or industrial environments.

Do not use the appliance on cracked glass.

Only use accessories recommended or supplied by Cecotec.

Please make sure your power supply voltage matches the

power voltage marked on the power adapter.

Do not use the appliance on a framed window with a frame

smaller than 5 mm.

Do not use the appliance on wet or greasy windows.

Store the appliance away from heat and flammable materials.

Do not use the appliance if it is not firmly attached to the glass

or has visible signs of damage.

To reduce the risk of electrical shock, do not put the appliance

in water or other liquid. Do not place or store the appliance

where it can fall or be dragged into a tub or a sink.

Do not touch the power plug or the appliance with wet hands.

Do not charge the appliance in extremely hot or cold

environments or it may affect the battery lifespan.

When charging the appliance, do not place it on other electrical

appliances and keep it away from fire and liquid.

Take care not to damage the power cord. Do not pull on or carry

the appliance by the power cord. Do not use the power cord

as a handle. Do not close a window on the power cord, or put

heavy weights on the power cord. Keep the power cord away

from hot surfaces.

Do not use the device if the cord is damaged. Do not use the

appliance if it is not working properly, has been dropped,

damaged or comes into contact with water. It must be repaired

by Cecotec’s Technical Service in order to avoid a hazard.

If the supply cord is damaged, please contact our Cecotec’s

Technical Service.

The plug must be removed from the receptacle before cleaning

or maintaining the appliance. Do not unplug the power adapter

by pulling on the power cord.

Should the back-up battery be replaced, contact our Technical

Service.

The back-up battery must be removed and discarded according

to local laws and regulations before disposal of the appliance.

The appliance must be disconnected from the power supply

before removing or the disposal of the device’s battery.

Please dispose the used batteries according to local laws and

regulations.

Do not incinerate the appliance even if it is severely damaged.

The battery can explode when burnt.

The appliance is not intended to be used by children under the

age of 8. It can be used by children over the age of 8, as long as

they are given continuous supervision.

Thisapplianceisnotintendedtobe usedbypeoplewithreduced

physical, sensory, or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision and/

or instruction concerning the use of the appliance in a safe way

and understand the hazards involved.

Keep this product out ofthe reach ofchildren under 8 years old.

The cleaning and maintenance of the appliance should not be

carried out by children without supervision.

980 CONNECTED 4140

ENGLISH ENGLISH

1. PARTS AND COMPONENTS

Main body

Fig. 1.

1. Front bumper

2. Status indicator

3. Start/Pause button

4. Handle

5. Schedule button

6. Speaker

7. Rear bumper

8. Power cord

9. Edge-detection sensor

10. Front mop

11. Squeegees

12. Mop

13. Fan

14. Driving wheels

15. Suction sensor

16. Power switch

17. Direction wheel

18. Bottom status indicator

Extension cord

Fig. 2.

Remote control

Fig. 3.

1. Direction buttons

2. Start/Pause button

3. Wheels cleaning button

4. Area cleaning button

5. N Cleaning mode button

6. Z Cleaning mode button

7. Thorough cleaning button

8. Empty buttons (no function)

Box contents

1. Window-cleaning robot

2. Power adapter cord

3. Safety suction pad

4. Remote control

5. Mop cloth

6. Cleaning solution

7. Instructions manual

2. BEFORE USE

Take the product out of the box and remove all packaging material.

Make sure all parts and components are included and in good conditions. If any visible signs of

damage are observed, contact Cecotec’s Technical Support Service immediately.

The ideal thickness of the windows should be at least 5 mm. It is suggested not to use the

device on a framed window thinner than 5 mm (0.2”). Conga WinDroid 980 Connected can

clean framed or frameless glass, larger than 50 x 70 cm (19.7” x 27.6”).

Fig. 4.

If the window is covered with dirt, clean a small area no smaller than the robot’s size on the

glass before using and placing the robot there.

Fig. 5.

Please ensure there is a 13-cm (5.1”) free space between the glass and any obstacle in the

room, like curtains or furniture.

Conga WinDroid 980 Connected can clean horizontally mounted glass but only when using the

direction control buttons on the remote control.

Conga WinDroid 980 Connected can clean glass at an angle but may not operate normally; in

such case there must be a person near supervising the process in order to avoid accidents.

The robot cannot be used upside down.

It is recommended to clean the robot with the standard spray clean solution.

Attaching the mop

Fig. 5.

Turn the robot over and attach the mop to the bottom of the robot smoothly. The white side of

the mop must be attached to the part with the velcro, and the gray microfiber side faces out.

Make sure the mop does not cover the squeegees or edge-detection sensors.

Power adapter assembly

Fig. 7.

Safety cable assembly

Before using this product for cleaning a window, please install the safety cable and the other

accessories.

980 CONNECTED 4342

ENGLISH ENGLISH

Fig. 8.

E. Power cord

F. Power adapter cord

G. Safety suction pad

H. Safety cord

Attach one end of the safety cable into end A on the robot power cord and tighten it.

Connect end A and end B and tighten it.

Place the otherend ofthe safetycable around the safety suction pad’s channel and pull it tight.

Fig. 9.

If the length of the power cord restricts the robot’s movement, an extension cord of the robot

can be used. Disconnect end A and end B, and connect them with both ends of the extension

cord respectively and tighten it. Only one extension cord can be used with the robot.

How to use the extension cord

Use the extension cord according to the actual distance or the glass size. Each line is 1.5-metre

long. When operating the product outside a tall building, it is suggested to use only a piece of

the extension cord.

Connect the two ends of extension cord separately to the adapter cable end and product cable

end. Tighten the screw buckles. It is suggested to use the safety cord at the same time.

Safety suction pad installation

When you use the robot to clean an inside window: press the safety suction pad firmly on the

top corner of the inside window. Make sure the safetysuction pad is attached securely in place.

When you use the robot to clean an inside window: press the safety suction pad firmly on the

top corner of the inside window. Make sure the safety suction pad is firmly secureed in place.

Fig. 10.

Wipe the surface of the safety suction pad with the provided finishing cloth.

Spray cleaning solution

Spray the upper and lower sides of the mop cloth with the cleaning solution. After spraying,

wipe the bottom of the robot with a cloth.

Conga Windroid 980 Connected features Smartphone App. Its Wi-Fi connectivity allows

connecting the robot to your Smartphone and using its different functions while displayed on

your phone (See App manual).

3. OPERATION

Do not unplug the device from the power supply when the robot is working, otherwise, the

product may fall off.

Fig. 11.

Start

Plug in the robot.

Let the battery charge between 1.5 and 2 hours before using the robot.

Switch on the robot

Fig. 12.

Move the switch to the “-” position. The status light indicator will turn on blue when the robot

is turned on.

* Keep objects away from the robot ’s fan to avoid blockage.

Place the robot on the glass

Place the robot on the window at least 10 cm (4”) from window corners or other obstacles.

The robot has successfully attached to the window when the status indicator light glows a

continuous blue.

Please ensure there is a 13-cm (5.1”) free space between the glass and any obstacle in the

room, like curtains or furniture.

Start cleaning

There are two methods to start the robot:

Press Start/Pause button on the robot or on remote control to start cleaning. Conga WinDroid

980 Connected automatically chooses “N” cleaning mode.

Choose between N or Z mode on the remote control depending on the window’s shape.

Use the remote control to start the product. N Cleaning Mode is best for tall windows.

Fig. 13.

Use the remote control to start the product. Z Cleaning Mode is best for wide windows.

Fig. 14.

Pause

Pause the robot during cleaning by pressing Start/Pause button on the robot or on the remote

control.

While the robot is paused, you can control the product’s working direction or operating mode

through the buttons on the remote control.

980 CONNECTED 4544

ENGLISH ENGLISH

Fig. 15.

Stop:

When cleaning is over, the product returns to the place where cleaning started and beeps.

Remove the robot from the surface

Fig. 16.

Grab the handle and press Start/Pause for more than 5 seconds. Then, remove the product.

Turn the robot off

Fig. 17.

Move the switch button to the “O” position.

Remove the safety suction pad

Fig. 18.

Unplug the product from the power supply.

Fig. 19.

Note: when the product displays a red light and beeps, please check if the power adapter is

connected correctly. When the power adapter is correctly connected, the product will show

a blue light and will start operating. When the power adapter is connected correctly, and

the product still shows a red light, please use the direction buttons on the remote control to

operate the product and move it from its current position, until the blue light shows up, press

Start/Pause keys on the remote control for the product to operate properly.

4. CLEANING AND MAINTENANCE

When cleaning the mop cloth and the bottom parts of the product, please switch off the

product.

Clean mop cloth

Turn the robot over and remove the mop cloth, soak it in cool, clean water for 2 minutes.

Handwash with mild detergent and lay flat to dry. Let it dry completely before attaching it

again to the robot.

Do not use a wet mop cloth on the robot or it may slip on the window.

Washing the mop cloth regularly can extend its service life.

If the cloth becomes worn or no longer fits, replace it with a new one to achieve best cleaning

performance.

Fig. 20.

Fan cleaning

Turn the robot over and wipe any debris from the fan with a cloth to maintain suction.

Guide wheels cleaning

Turn the robot over and wipe the four side rollers with a cloth to maintain their effectiveness.

Edge Detection Sensors cleaning

Turn over the robot and wipe five edge detection sensors clean with a cloth to maintain their

effectiveness.

Fig. 21.

Squeegees cleaning

Turn over the robot and wipe five edge detection sensors clean with a cloth to maintain their

effectiveness.

Driving wheels cleaning

Before cleaning the wheels, move the power switch to the “-” position. Then wait 8 seconds

until it stops vacuuming and starts beeping. Then press the Start/Pause button key on the

remote control and start cleaning the driving wheels.

Fig. 22.

Press Start/Pause and Clean buttons on the remote control to check the driving wheels. If

there is any dust, press pause and clean the dust.

Fig. 23.

After cleaning, turn off the switch on of the bottom part to the “O” position.

Light status indicator

Blue light

flashing

The product can be placed on the glass.

Steady blue

light

Product suction is succesful. The robot remains attached to window and it

can start cleaning the window.

Red light

flashing

The robot stops suctioning so it can be removed from the window.

980 CONNECTED 4746

ENGLISH ENGLISH

Pink light

flashing

Power adapter is not connected or vacuum is not enough. If the cord is

unplugged and the product starts beeping, remove the product from the

window or plug it again to a power supply.

5. TROUBLESHOOTING

Ref. N.º Problem Cause Solution

1 If the blue light

flashes, the robot

is checking that

conditions are suitable

for operating. If this

process takes longer

than 20 seconds, it

can be due to any of

these causes:

Mops are not installed

correctly

Remove the cleaning mop

and install it again to

make it flat.

Free-fall sensors error  Check if the free fall

sensor has any foreign

material that stops it

from working properly.



The glass surface is too

dirty.

Clean the are firstly

before sticking the

product to the window.

2Red light flashes and

beeps

Power adapter is not

connected.

Connect to the power

supply first, and press

Start to make the product

work again.

In case of power cut, use

remote control to direct

the product to the place

where safely reach it and

remove it.

There is some risk when

using remote control

under power cut. Please

make sure that highest

safety precautions are

taken.



Vacuum power is not

enough during operation.

Use the remote controller

to take the robot back to

safe position.

There is some risk when

using remote control

under power cut. Please

make sure that highest

safety precautions are

taken.

Free-fall sensor error while

operating.

Check if there is any dust

in the free-fall sensors,

and clean it. If this does

not work, please contact

Cecotec’s customer

service.

980 CONNECTED 4948

ENGLISH ENGLISH

3Pink light flashes. Power adapter is not

connected.

Connect to the power

supply first, and press

Start to make the product

work again.

In case of power cut, use

remote control to direct

the product to the place

where safely reach it and

remove it.

There is some risk when

using remote control

under power cut. Take all

necessary precautions.

4 The device does not

operate or move

correctly.

The glass surface is too dirty. Clean driving wheels.

Change the mops.

This product is not

suitable for very dirty

glasses.

5 Remote control

failure.

When the device is operating,

only Start/Pause buttons

work.

Pause the product first,

and then use other

buttons on the remote

control to control the

product

.

6. TECHNICAL SPECIFICATIONS

Model: Conga WinDroid 980 Connected

Product reference: 05458

Power: 90 W, 100-240 V, 50/60 Hz

Frequency bands: 1 - 13 GHz

Maximum Transmission Power: 10 dBm

Made in China | Designed in Spain

7. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic

Equipment (WEEE), specifies that old household electrical appliances must

not be disposed ofwiththe normalunsorted municipalwaste. Old appliances

must be collected separately, in order to optimize the recovery and recycling

of the materials they contain, and reduce the impact on human health and

the environment.

The crossed out “wheeled bin” symbol onthe product reminds you ofyour obligationto dispose

of the appliance correctly.

Consumers must contact their local authorities or retailer for information concerning the

correct disposal of old appliances and/or their batteries.

8. TECHNICAL SUPPORT SERVICE AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof

of purchase is submitted, the product is in perfect physical condition, and it has been given

proper use, as explained in this instruction manual.

The warranty will not cover the following situations:

The product has been used for purposes other than those intended for it, misused, beaten,

exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault

attributable to the customer.

The product has been disassembled, modified, or repaired by persons, not authorised by the

official Technical Support Service of Cecotec.

Faults deriving from the normal wear and tear of its parts, due to use.

The warranty service covers every manufacturing defects of your appliance for 2 years, based

on current legislation, except consumable parts. In the event of misuse, the warranty will not

apply.

If at any moment you detect any problem with your product or have any doubt, do not hesitate

to contact Cecotec Technical Support Service at +34 963 210 728.

124124

CLEAN

Fig./Img./Abb./Afb./ Rys./Obr. 1

Andere Handbücher für Conga WinDroid 980 Connected

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere cecotec Staubsauger Handbücher

cecotec

cecotec Perfect&Clean Connected Vital Bedienungsanleitung

cecotec

cecotec Conga Rockstar 2700 Vital Bedienungsanleitung

cecotec

cecotec CONGA ROCKSTAR MULTICYCLONIC XL ANIMAL Bedienungsanleitung

cecotec

cecotec Conga 6090 Bedienungsanleitung

cecotec

cecotec Conga PopStar 10180 Ash Bedienungsanleitung

cecotec

cecotec Conga PopStar 4000 Ultimate Animal Pro Bedienungsanleitung

cecotec

cecotec 05708 Bedienungsanleitung

cecotec

cecotec Conga PopStar 3000 CarpetClean Bedienungsanleitung

cecotec

cecotec CONGA ROCKSTAR 1500 ULTIMATE ERGOFLEX Bedienungsanleitung

cecotec

cecotec Conga ThunderBrush 850 Bedienungsanleitung

cecotec

cecotec Conga Popstar Glass Titanium Bedienungsanleitung

cecotec

cecotec Conga Eternal Laser X-Treme Bedienungsanleitung

cecotec

cecotec CONGA ROCKSTAR 500 X-TREME ERGOWET Bedienungsanleitung

cecotec

cecotec Conga 5290 Ultra Bedienungsanleitung

cecotec

cecotec Conga WinDroid 980 Connected Bedienungsanleitung

cecotec

cecotec SCOBA 2100 TWICE MAX Bedienungsanleitung

cecotec

cecotec CONGA ROCKSTAR 7500 ASTRAL ERGOWET ANIMAL Bedienungsanleitung

cecotec

cecotec CONGA ROCKSTAR 8500 INFINITY ERGOWET ANIMAL... Bedienungsanleitung

cecotec

cecotec Conga Rockstar 900 ULTIMATE ERGOWET Bedienungsanleitung

cecotec

cecotec Conga Rockstar Wet&Dry Steel Bedienungsanleitung

cecotec

cecotec Conga Popstar 2900 Ergoflex Bedienungsanleitung

cecotec

cecotec CONGA 3490 Bedienungsanleitung

cecotec

cecotec CONGA THUNDERBRUSH 520 Bedienungsanleitung

cecotec

cecotec Conga PopStar Micro 18,5V Animal Hand Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung