Cisco Explorer 8300 Bedienungsanleitung

Getting Started with the

Explorer 8300 and 8300HD DVR

User Guide

Welcome!

With the Explorer® 8300™

Digital Video Recorder (DVR),

you can easily record your fa-

vorite programs and then play

them back anytime. The DVR

and Picture-In-Picture (PIP)

features give you complete

control, convenience, and

choice when watching TV.

Use your DVR to control the

following features...

Control live TV

The telephone is ringing and you do not want to miss any scenes of your

favorite live TV program. DVR lets you PAUSE the live program, or REWIND

and PLAY a portion of it again, or FAST-FORWARD it to catch up to live TV.

Sports fans can enjoy complete control by using INSTANT REPLAY,SLOW

MOTION, and FRAME ADVANCE AND REWIND to watch their favorite play

again.

Record TV programs without a VCR

RECORD and save your favorite TV programs to the DVR to watch later.

When two of your favorite TV programs are scheduled at the same time,

RECORD one program to the built-in recorder while watching the other!

Never miss your favorite programs that are scheduled at the same time.

Simply RECORD both programs at the same time. While recording both

programs, you can play back a third program you have already recorded.

RECORD a single episode or all episodes of your favorite TV programs.

RECORD one of your favorite TV programs and at the same time, access any

advanced application, such as video-on-demand (VOD).

Not sure if you have room to RECORD new programs? You can check your

available recording space any time.

Watch two TV programs at the same time

PIP is built into the Explorer 8300 DVR, so you can watch two live programs

at the same time on any make or model TV that is connected to your DVR.

When something exciting occurs in the PIP program, you can easily swap the

PIP into the Main screen. Once that program is in the Main screen, you can

pause, rewind, or record it.

When the PIP screen position is covering a “must see” moment on the Main

screen, simply MOVE the PIP screen to a dierent corner of your TV screen.

Let’s Get Started!

"Design On A Dime"

Save: Until erased

Title

Options/Play Scheduled Recordings Preferences

Date Time

Recorded List

Length

World Soccer

Extreme Homes

Design On A Dime

Home Matters

Thirteen Days

Wed 11/10

Mon 11/15

Sun 11/14

Mon 11/8

4:10am

8:10pm

12:00pm

12:30pm

8:00pm

30min

50min

30min

1hr 30min

Using Your Remote Control

Use the keys on the AllTouch Remote Control to access the DVR and PIP

features of your DVR.

This guide describes the keys used to access the DVR and PIP features.

For descriptions of the other key functions, refer to the user’s guide for your

remote control model:

• AT8400™ AllTouch Remote Control User’s Guide, part number 749219

• AT8450™ AllTouch Remote Control User’s Guide, part number 4001707

• AT8550™ AllTouch Remote Control User’s Guide, part number 4006383

Important: Your remote control must be set to Cable Mode (CBL) to access

the DVR features.

AllTouch AT8400 Remote Control

T15465

Swaps PIP screen with

Main screen

Turns PIP feature on or off

Moves PIP screen

Displays the Program Guide

Displays a menu of services

or options (if offered by your

cable service provider)

Displays a list of your

recorded programs

Makes on-screen choices

Stops recording a program

or stops playback

Pauses the program you

are watching

Rewinds in 3 speeds

(Must be in Play mode)

Replays the last 8 seconds of

a program (Instant Replay)

Moves through on-screen

choices

Selects cable mode

Performs the selected action

Removes all banners and

graphics from TV screen

Dedicated PIP Keys

Selects PIP channels up

or down

Power on or off

Dedicated DVR Keys

Returns to live programming

Fast-forwards in 3 speeds

(Must be in Play mode)

Records a program

Resumes playing a paused

program (Press twice for

slow motion)

Sizes the picture for some

high-definition television

(HDTV) models

Preparing the Explorer 8300HD DVR to Work

With Your High-Denition TV

First make sure that your DVR is properly connected to your HDTV television

and other electronic devices. Use the component (PrPbY) or HDMI™ ports to

connect the DVR to your HDTV.

For more information, refer to the connectivity guide for your DVR model:

• Connecting the Explorer®8300™ Digital Video Recorder, part number

4003987

• Connecting the Explorer®8300HD™ Digital Video Recorder, part number

4003986

Note: The composite ports (red, yellow, white) and the component ports

(PrPbY) on the back of the 8300HD are both active simultaneously.

Selecting HDTV Picture Formats With the HDTV Setup Wizard

The following section provides instructions for using the HDTV Setup Wizard

to select HDTV picture formats using the Easy and Advanced Setup modes.

Start the HDTV Setup Wizard

To start the HDTV Setup Wizard, follow these steps.

1. Make sure that the DVR is powered OFF, but still plugged into an active

power outlet, and connected to the HDTV using the proper connectors

(HDMI or Component for an HDTV; Composite, RF, or S-Video for a SDTV).

2. Turn the TV ON.

3. With the DVR powered OFF, press Guide

and Info at the same time. The HDTV

Setup Wizard screen appears.

4. Press

to start the set up.

5. Choose one of the following options:

• To choose the Easy Setup option press

; then, go to the Easy Setup

Instructions on page 5.

Note: Choosing the Easy Setup

mode limits your HDTV picture

formats to 480i and 1080i,

depending on the TV type you select.

• To choose the Advanced Setup

option press

; then, go to the

Advanced Setup Instructions on

page 5.

Note: Choosing the Advanced Setup mode allows you to save all the

HDTV picture formats, so that you can toggle between them easily while

watching TV.

Setup Options

Press for Easy Setup: Used by most TV viewers

Press for Advanced Setup: Used by advanced TV viewers

Complete setup

LIST

AUDIO VIDEOL R

EXIT

INFO

GUIDE

POWER

Press the Guide and Info

keys at the same time

T15466

Easy Setup Instructions

1. Press

to select the type of TV

screen you have. The setup is complete.

2. Press Power to begin watching TV.

Notes:

• If you pressed

for the standard

screen (4:3) TV setting, the TV is set to

receive programming in 480i format on

non-HD channels and 1080i format on

HD channels.

• If you pressed

for the widescreen (16:9) TV setting, the TV is set to

only receive programming in 1080i format (even on non-HD channels).

Tip: After you complete the setup, you can use to stretch or zoom

the picture.

Advanced Setup Instructions

1. Press

to select the type of TV

screen you have.

2. Follow the on-screen instructions to

select your picture formats.

3. Press SELECT to toggle between the

Save and Remove options, or press

to see how the next format looks on your

TV screen.

Note: If you see a black screen do not press SELECT. Press

again to

view the next screen format.

4. After saving the picture formats, press EXIT. The setup is complete.

5. Press POWER to begin watching TV.

Tip: After you complete the setup, you can use to stretch or zoom the

picture.

Restart setup

Standard or Widescreen

Press if your TV has a standard screen (4:3)

Press if your TV has a widescreen (16:9)

Complete setup

Restart setup

Standard or Widescreen

Press if your TV has a standard screen (4:3)

Press if your TV has a widescreen (16:9)

Complete setup

Select Picture Mode for Normal Viewing

After you use the HDTV Setup Wizard to select all the HDTV picture formats

you want to use, you need to choose a General Settings picture mode

for normal viewing. If you do not have your HDTV connected to the HDMI

connector on the back of the 8300HD DVR, then Pass-Through mode is

recommended for normal viewing. Pass-Through mode allows non-HD

channels to be displayed using their native picture formats, which can

improve picture quality on non-HD channels.

To select Pass-Through mode for normal

viewing, follow these steps.

1. Press Settings twice. The General

Settings menu appears.

2. Press Move Up or Move Down to

highlight Set: Picture Format.

3. Press Move Right to highlight the picture

format setting.

4. Press Move Up to select Pass-Through.

5. Press Accept

to use this option for the 8300HD. The DVR front panel

displays AUTO, plus the scan rate you are viewing (for example, 1080i).

6. Press Exit to return to normal viewing.

Note: When the HDMI connector is connected to the HDTV, the General

Settings - Set: Picture Format screen displays the AutoDVI/HDMI option

instead of the Pass-Through option.

Important: Do not connect the HDMI (DVI) output to a HDTV that does not

support High-Denition Copy Protection (HDCP). If you connect the HDMI

(DVI) output cable to a HDTV that does not support HDCP, you will not be

able to see any video output. A message will be displayed instructing you to

disconnect the HDMI connection and watch video output through the PrPbY

component connectors.

Important Note Regarding the HDMI Interface

The High-Denition Multimedia Interface (HDMI) is an all-digital audio and

video interface. HDMI provides a digital interface between any audio and

video source. HDMI supports standard, enhanced, or high-denition video,

plus digital audio.

Some HDTVs do not contain circuitry to decode Dolby®Digital formatted

content. If you connect your DVR to an HDTV that cannot support Dolby

Digital audio, the HDMI interface instructs the DVR to switch its audio outputs

to 2-channel PCM audio (to be compatible with the HDTV). In this case,

all digital audio outputs on the DVR are formatted as 2-channel PCM. As

a result, you will not be able to receive Dolby Digital or DTS audio on your

home theater system when connected to either the optical or coax (RCA

Connector) S/PDIF ports. You can avoid this by overriding the automatic

conguration through the General Settings menu and switching the audio

output to Dolby Digital.

Important: If your HDTV cannot decode Dolby Digital formatted content

and you have congured the DVR to output in the Dolby Digital format, you

will not be able to listen to audio through the TV. Instead, you must use your

home theater or your Dolby Digital decoding device in order to hear audio.

Alternatively, you can recongure the DVR to output 2-channel PCM any

time you want to use the TV to produce the audio portion of the content by

selecting HDMI in the General Settings - Audio Output screen. Depending

upon your equipment capabilities to select alternate audio sources for input,

other congurations may be possible. Refer to your equipment user’s guides

for more information.

Controlling Live TV

Control a Live Program You Are Watching

Use the following remote control keys to control the live program in the Main

screen:

The Pause, Rewind, Fast-Forward, Play,

Instant Replay, and Live keys on the remote

control are used to control the live program in

the Main screen.

For example, when you are watching your

favorite live TV program and the telephone

rings, press Pause to pause the program for up

to 1 hour. From Pause mode, press Pauseor

Play to resume the normal play mode.

While in normal play mode, press Rewindor Fast-Forward to cycle through

three dierent speeds of rewind or fast-forward.

To reverse or advance one frame at a time, press Pause and then repeatedly

press Rewindor Fast-Forward. For example, to advance three frames,

press Pause and then press Fast-Forward three times.

To see the action in slow motion, press Play from normal play mode. Press

Playagain to resume normal play mode.

To replay the last 8 seconds of a live or recorded program, press Instant

Replay.

If you have rewound or paused a live program, press Live at anytime to catch

up to the live TV program.

Note: You can use these same dedicated DVR keys to control the reduced

screen (also known as the quarter screen) in the Program Guide and in all

DVR screens.

Pause a Live Program

The paused status bar appears when you press Pause.

Note: All of the features for controlling live TV (such as Pause, Fast-Forward,

Rewind) are also available when playing back recorded programs.

T10964

T15467

Pause Design On ADime 12:00 - 12:30pm

"Paused" Status Bar

Red Area of Bar Indicates

Missed Programming

Green Area of Bar

Indicates Stored or

Recorded Programming

Clear Area of Bar Indicates

Programming Not Aired Yet

Live Point of Programming

Triangle Indicates Your

Current Position in Program

Using the Program Guide

Find a Program to Watch

1. Press Guide . The Program

Guide appears and lists the next 7

days of programs.

2. Press the directional keys ( ) to

move through the program listings

and highlight the program you want

to watch.

3. Press Select . If the program is

currently on, the Program Guide

closes and the program you selected appears in full-screen TV. If the

program is on in the future, a future program option screen appears.

Search for a Program by Channel, Title, or Theme

1. Press Guide . The Program Guide appears and lists the next

7 days of programs.

2. Press Browse By

. The Browse By area of the Program Guide displays

the options Title, Channel, and Theme.

3. Press Move Up or Move Down to highlight one of the following

options:

• Channel, which lists programs numerically by channel number

• Title, which lists programs alphabetically by program title

• Theme, which lists programs by theme, such as adventure, comedy,

sports, or news

4. Press Select . The Browse By area of the Program Guide displays the

programs according to the option you selected.

Search for a Program by Date

1. Press Guide . The Program Guide appears and lists the next

7 days of programs.

2. Press Date

. The Browse By area of the Program Guide displays the

next 7 dates.

3. Press Move Up or Move Down to highlight a date.

4. Press Select . The Program Guide displays the programs that will be

broadcast on that date.

Headline News

4:00-5:00pm

Up-to-the-minute coverage of the

latest events.

HDLN

DSC 34

CNN 35

HDLN 36

ESPN 37

TOON 38

Great Chefs

Inside Politics

' Headline News

Bikes, Blades & Boards

Yu-Gi-Oh!

Hollywo

Pokemo

Travelers

Headline News

NFL's Greatest

Pokemon

Great Chefs

Early Prime

Yu-Gi-Oh!

4:00pm 4:30pm

Wed 6/18 4:02pm

5:00pm 5:3CHANNEL

WED 6/18

DateBrowse By

TUE 1/15

Channel 2 Action News

Tue 5:00-6:00pm

(60 min)

WSB

DateBrowse By

PBY_B 1915

DVR 1

WSB 2

WATL 3

WGNX 4

World View News

Recorded Programs List

Channel 2 Action News

Ricki Lake

Frasier Simpso

Channel 2 Action News

Steve Harvey

Judge JudyFrasier

5:00pm 5:30pm 6:00pm 6:3CHANNEL

Choose highlighted item

All Episode Recording Options

Cancel changes

Options

All episodes on this channel at any time

New first-run episodes on this channel

All episodes on this channel in this time slot

"Design On A Dime"

HGTV (Ch 238)

Thu: 11/13

START

Accept recording Cancel changes

RECORD

Confirm Recording

SAVE TIME

12:00pm

STOP

12:30pm One episode

All episodes 14 days

"Design On A Dime"

Tue: 11/13

Save: 14 days

START

Accept recording Cancel changes

RECORD

Confirm Recording

SAVE TIME

12:00pm

STOP

12:30pm All episodes

One episode 14 days

"Design On A Dime"

Tue: 11/13

Save: 14 days

Recording TV Programs

Record a TV Program You Are Watching

1. Press Record .

2. While in the Conrm Recording

screen, choose your recording options

and press

. The Record Indicator is

lit on the front panel of the DVR.

3. To manually stop recording before the

scheduled time, press Stop and

then follow the on-screen choices.

Record a TV Program From the

Program Guide

1. Press Guide .

2. Press the arrow keys to highlight a TV

program, and then press Record .

3. In the Conrm Recording screen,

choose your recording options and

press

. The recording program is

highlighted in red in the Program Guide.

Record Multiple Episodes of a TV

Program

If you want to record all the episodes of

a program you are watching, follow these

steps:

1. Press Record .

2. Choose One Episode or All Episodes.

Notice the information in the fourth

column changes, based on your

selection. Press

. If you selected All

Episodes from the third column, the All

Episode Recording Options screen

appears.

3. Choose one of the options on the

screen.

4. Press Select to save your settings.

Note: The “New rst-run episodes

on this channel” option is subject to

availability in your area.

Andere Handbücher für Explorer 8300

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco DVR Handbücher

Cisco

Cisco 8455DVB Bedienungsanleitung

Cisco

Cisco Explorer 8550HDC Bedienungsanleitung

Cisco

Cisco Explorer 8540HD Bedienungsanleitung

Cisco

Cisco Explorer 4642HD Bedienungsanleitung

Cisco

Cisco Explorer 8300C Bedienungsanleitung

Cisco

Cisco 8455DVB Bedienungsanleitung

Cisco

Cisco Explorer 8640HDC Bedienungsanleitung

Cisco

Cisco Scientific Atlanta Explorer 8300HDC Bedienungsanleitung

Cisco

Cisco Explorer 8000 Bedienungsanleitung

Cisco

Cisco CHS 335HDC Bedienungsanleitung

Cisco

Cisco Explorer 4700 Bedienungsanleitung

Cisco

Cisco Scientific Atlanta Explorer 8300 Bedienungsanleitung

Cisco

Cisco Explorer 8240HD Bedienungsanleitung

Cisco

Cisco 8389DVB Bedienungsanleitung

Cisco

Cisco Explorer 8700 Cable DVR Family Set-Tops Bedienungsanleitung

Cisco

Cisco DVR Bedienungsanleitung

Cisco

Cisco Explorer 4640HD Bedienungsanleitung

Cisco

Cisco Explorer 8300 Bedienungsanleitung

Cisco

Cisco 8455DVB Bedienungsanleitung

Cisco

Cisco Explorer 8450HDC Bedienungsanleitung

Cisco

Cisco Explorer RNG200 Bedienungsanleitung

Cisco

Cisco Explorer RNG200 Bedienungsanleitung

Cisco

Cisco Explorer 8300 Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung

DIGIFUSION

DIGIFUSION FVRT150 Bedienungsanleitung