Cisco Linksys USB200M Bedienungsanleitung

A Division of Cisco Systems, Inc.

Model No.

WIRED

Compact USB 2.0

USB200M

User Guide

10/100

Network Adapter

Compact USB 2.0 10/100 Network Adapter

Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco

rights reserved. Other brands and product names are trademarks or registered trademarks of their respective

holders.

How to Use this User Guide

The user guide to the Compact USB 2.0 10/100 Network Adapter has been designed to make understanding

networking with the Adapter easier than ever. Look for the following items when reading this User Guide:

In addition to these symbols, there are definitions for technical terms that are presented like this:

Also, each figure (diagram, screenshot, or other image) is provided with a figure number and description, like

this:

Figure numbers and descriptions can also be found in the "List of Figures" section.

This exclamation point means there is a caution or

warning and is something that could damage your

property or the Adapter.

word: definition.

This checkmark means there is a note of interest and

is something you should pay special attention to while

using the Adapter.

This question mark provides you with a reminder about

something you might need to do while using the Adapter.

Figure 0-1: Sample Figure Description

USB200Mv2-UG-505123A BW

WARNING: This product contains chemicals, including lead, known

to the State of California to cause cancer, and birth defects or other

reproductive harm. Wash hands after handling.

Compact USB 2.0 10/100 Network Adapter

Table of Contents

Chapter 1: Introduction 1

Welcome 1

What’s in this Guide? 2

Chapter 2: Getting to Know and Connecting the Compact USB 2.0 10/100 Adapter 3

The Ports and LEDs 3

USB Icon and Ports 4

Chapter 3: Driver Installation for the Compact USB 2.0 10/100 Network Adapter 6

Overview 6

Driver Installation for Windows XP 6

Driver Installation for Windows 2000 8

Driver Installation for Windows Millenium 10

Driver Installation for Windows 98 15

Appendix A: Troubleshooting 20

Common Problems and Solutions 20

Appendix B: Glossary 25

Appendix C: Specifications 32

Appendix D: Regulatory Information 34

Appendix E: Warranty Information 35

Appendix F: Contact Information 36

Compact USB 2.0 10/100 Network Adapter

List of Figures

Figure 2-1: Ports and LEDs 3

Figure 3-1: Welcome 6

Figure 3-2: Choose your Search and Installation Options 6

Figure 3-3: Windows Logo Testing 7

Figure 3-4: Installation Complete 7

Figure 3-5: Install Hardware Device Drivers 8

Figure 3-6: Locate Driver Files 8

Figure 3-7: Ready to Install Driver 9

Figure 3-8: Digital Signature 9

Figure 3-9: Hardware Found 10

Figure 3-10: Specify a Location 10

Figure 3-11: Ready to Install Driver 11

Figure 3-12: Installation Complete 11

Figure 3-13: Network Screen 12

Figure 3-14: File and Printer Sharing 12

Figure 3-15: Indentification Tab 13

Figure 3-16: Access Control Tab 13

Figure 3-17: Search for Driver 15

Figure 3-18: Specify a Location 15

Figure 3-19: Ready to Install Driver 16

Figure 3-20: Installation Complete 16

Figure 3-21: Configuration Tab 17

Figure 3-22: File and Print Sharing 17

Figure 3-23: Configuration Tab 18

Figure 3-24: Access Control Tab 18

Figure 3-25: Access Control Tab 19

Chapter 1: Introduction

Welcome

Compact USB 2.0 10/100 Network Adapter

Chapter 1: Introduction

Welcome

Thank you for choosing the Compact USB 2.0 10/100 Network Adapter. This Compact USB 2.0 10/100 Network

Adapter will allow you to network better than ever.

How does the Compact USB 2.0 10/100 Network Adapter do all of this? A Compact USB 2.0 10/100 Network

Adapter allows you to connect to any 10/100Mbps or Gigabit hub or switch without having to open your PC. The

Gigabit USB Network Adapter from Linksys allows you to instantly connect to a network from a USB-enabled

desktop or notebook PC running Windows Millennium, 2000, or XP. The Plug-and-Play compatible device attaches

to your PC’s USB port via a USB Type A connector. Simply connect a standard UTP Category 5 network cable into

the Gigabit USB Network Adapter’s RJ-45 port, install the included network software driver, and you are

networked.

The Gigabit USB Network Adapter is bus-powered, drawing power from the host PC and requires no external

power cords. The Adapter features the maximum throughput supported by USB, easy-to-read LEDs, and compact

design.

Use the instructions in this Guide to help you connect the Compact USB 2.0 10/100 Adapter, set it up, and

configure it to bridge your different networks. These instructions should be all you need to get the most out of the

Compact USB 2.0 10/100 Adapter.

Chapter 1: Introduction

What’s in this Guide?

Compact USB 2.0 10/100 Network Adapter

What’s in this Guide?

This user guide covers the steps for setting up and using the Compact USB 2.0 10/100 Adapter.

• Chapter 1: Introduction

This chapter describes the Adapter’s applications and this User Guide.

• Chapter 2: Getting to Know and Connecting the Compact USB 2.0 10/100 Adapter

This chapter describes the physical features and explains the connection of the Adapter.

• Chapter 3: Setup Utility for the Compact USB 2.0 10/100 Adapter

This chapter explains how to install and uninstall the Setup Utility.

• Appendix A: Troubleshooting

This appendix describes some potential problems and solutions, as well as frequently asked questions,

regarding installation and use of the Adapter.

• Appendix B: Glossary

This appendix gives a brief glossary of terms frequently used in networking.

• Appendix C: Specifications

This appendix provides the Adapter’s technical specifications.

• Appendix D: Warranty Information

This appendix supplies the Adapter’s warranty information.

• Appendix E: Regulatory Information

This appendix supplies the Adapter’s regulatory information.

• Appendix F: Contact Information

This appendix provides contact information for a variety of Linksys resources, including Technical Support.

Chapter 2: Getting to Know and Connecting the Compact USB 2.0 10/100 Network Adapter

The Ports and LEDs

Compact USB 2.0 10/100 Network Adapter

Chapter 2: Getting to Know and Connecting the Compact

USB 2.0 10/100 Network Adapter

The Ports and LEDs

The Ports

USB Port The USB port is a Type A connector. Connect the USB extension cable from your PC or hub to

this port.

Ethernet Port The Ethernet port connects the Adapter to a Category 5 Ethernet network cable.

Figure 2-1: Ports and LEDs

Chapter 2: Getting to Know and Connecting the Compact USB 2.0 10/100 Network Adapter

USB Icon and Ports

Compact USB 2.0 10/100 Network Adapter

LEDs

100/ACT Green. The LED lights up when there is a connection to a 100Mbps network. It flashes when

the computer is transmitting or receiving data at 100Mbps.

F/H Green. The LED lights up when the Adapter is operating in full-duplex mode. The LED is off

when the Adapter is operating in half-duplex mode.

10/ACT Green. The LED lights up when there is a connection to a 10Mbps network. It flashes when the

computer is transmitting or receiving data at 10Mbps.

With these, and many other Linksys products, your networking options are limitless. Go to the Linksys website at

www.linksys.com for more information about products that work with the Compact USB 2.0 10/100 Adapter.

USB Icon and Ports

The USB Icon (below) generally indicates where a USB port is located on a desktop or notebook computer.

The picture below shows two USB ports as they might be found on your computer. Note the two USB icons above

the port.

Chapter 2: Getting to Know and Connecting the Compact USB 2.0 10/100 Network Adapter

USB Icon and Ports

Compact USB 2.0 10/100 Network Adapter

Connecting the Adapter

1. With your PC turned off, insert the Adapter’s USB end into your PC’s USB port or USB hub.

2. Insert one end of an Ethernet network cable into the Adapter’s RJ-45 port.

3. Insert the other end of the Ethernet network cable into an Ethernet networking device.

The hardware installation is complete.

To install the Adapter’s driver, proceed to “Chapter 3: Driver Installation for the Compact USB 2.0 10/100

Network Adapter” and to the section for the Windows operating system that your PC uses.

With these, and many other Linksys products, your networking options are limitless. Go to the Linksys website at

www.linksys.com for more information about products that work with the Compact USB 2.0 10/100 Network

Adapter.

Chapter 3: Driver Installation for the Compact USB 2.0 10/100 Network Adapter

Overview

Compact USB 2.0 10/100 Network Adapter

Chapter 3: Driver Installation for the Compact USB 2.0

10/100 Network Adapter

Overview

This chapter will take you through all the steps necessary to install the driver for the Compact USB 2.0 10/100

Network Adapter. After physically connecting the Adapter to your computer’s USB port or hub, follow these

instructions to install the hardware device driver. The installation procedures for the hardware device driver vary

depending on your PC’s operating system, so make sure to follow the instructions for your operating system. The

instructions also may vary slightly depending on your current operating system’s configuration. If at any time

during the installation you encounter problems, consult “Appendix A: Troubleshooting.”

Driver Installation for Windows XP

1. If you haven’t already, start your computer.

2. Windows XP will automatically detect the Adapter connected to your computer and display the Welcome to

the Found New Hardware Wizard screen. Select Install from a list or specific location (Advanced), and

insert the Driver CD into the CD-ROM drive. Then click the Next button.

3. Select Search for the best driver in these locations. Only select Include this location in the search:, and

enter D:\winxp in the field provided. Then click the Next button.

Figure 3-1: Welcome

Figure 3-2: Choose your Search and Installation

Options

NOTE: Throughout this user guide, it is assumed that “D” is the

letter of your CD-ROM drive.

NOTE: Do not click Cancel at any time during the installation

process. Doing so will prevent your driver from being properly

installed on your PC.

Inhaltsverzeichnis

Andere Cisco Netzwerkkarte Handbücher

Cisco

Cisco WAN Interface Card Cable WIC-1DSU-T1 Bedienungsanleitung

Cisco

Cisco Linksys WUSB600N Bedienungsanleitung

Cisco

Cisco HWIC-1FE - WAN Interface Card Expansion... Bedienungsanleitung

Cisco

Cisco WAN Interface Card WIC-1DSU-56K4 Bedienungsanleitung

Cisco

Cisco WAE-674-K9 - Wide Area Application Engine... Bedienungsanleitung

Cisco

Cisco Linksys RangePlus WPC100 Bedienungsanleitung

Cisco

Cisco MGX-FRSM-2CT3 Bedienungsanleitung

Cisco

Cisco WAN Interface Cards Cable WIC-1B-U Bedienungsanleitung

Cisco

Cisco Media Gateway Controller Node Manager Bedienungsanleitung

Cisco

Cisco Catalyst 4500 Series Handbuch

Cisco

Cisco ONS 15310-MA Bedienungsanleitung

Cisco

Cisco HWIC-4ESW - EtherSwitch HWIC Switch Bedienungsanleitung

Cisco

Cisco WPC600N - Ultra RangePlus Wireless-N PC Card Bedienungsanleitung

Cisco

Cisco LINKSYS PLTS200 Bedienungsanleitung

Cisco

Cisco uBR-MC28U Bedienungsanleitung

Cisco

Cisco IDTA153 Bedienungsanleitung

Cisco

Cisco WUSB54GSC Bedienungsanleitung

Cisco

Cisco VWIC-2MFT-T1 - Multiflex Trunk Voice/WAN Interface Card Expansion... Bedienungsanleitung

Cisco

Cisco Linksys WUSB600N Bedienungsanleitung

Cisco

Cisco DFC3B Installations- und Betriebshandbuch

Cisco

Cisco ONS 15454 Series Bedienungsanleitung

Cisco

Cisco EHWIC-4SHDSL-EA Merkblatt

Cisco

Cisco CompactFlash Adapter Bedienungsanleitung

Cisco

Cisco LINKSYS WUSB54GR Bedienungsanleitung

Beliebte Netzwerkkarte Handbücher anderer Marken

FirstComm

FirstComm OBiWiFi5G Bedienungsanleitung

Sun Microsystems

Sun Microsystems Interface Adapter Bedienungsanleitung

TRENDnet

TRENDnet TU2-ETG Bedienungsanleitung

YASKAWA

YASKAWA SI-EN3 Bedienungsanleitung

Paradyne

Paradyne BitStorm 2600 IP DSLAM Bedienungsanleitung

Belkin

Belkin F5D7050 Bedienungsanleitung

3Com

3Com EtherLink 3C509B Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITX Bedienungsanleitung

Delta Electronics

Delta Electronics Braking Modules VFDB Series Bedienungsanleitung

TwinMOS

TwinMOS Booming Bedienungsanleitung

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Bedienungsanleitung

Buffalo

Buffalo AirStation WLI-PCM-L11GP Bedienungsanleitung

National Instruments

National Instruments NI 9234 Bedienungsanleitung

Hama

Hama 49276 Bedienungsanleitung

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Bedienungsanleitung

Compaq

Compaq Wireless LAN 100 Bedienungsanleitung

Bose

Bose PowerMatch Dante Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITXR Bedienungsanleitung