Cisco ISE-3315 Bedienungsanleitung

CHAPTER

Beta Draft - Cisco Confidential

2-1

Cisco Identity Services Engine Appliance Hardware Installation Guide 1.0

OL-22971-01

Introducing the Cisco ISE-3300 Series Hardware

This chapter introduces the Cisco ISE-3300 series appliance hardware and provides descriptions of the

support appliance hardware, the major components, controls, connectors, and front- and rear-panel LED

indicators. This chapter contains information about the following topics:

•Product Overview, page 21

•Input/Output Ports and Connectors, page 218

•Regulatory Compliance, page 219

Product Overview

The following sections provide important details about the ISE-3300 series appliances (ISE-3315,

ISE-3355, and ISE-3395):

•ISE-3300 Series Appliance Overview, page 21

•ISE-3315 Serial Number Location, page 26

•Cisco ISE-3315 Front and Rear Panels, page 26

•ISE-3355 Serial Number Location, page 29

•Cisco ISE-3355 Front and Rear Panels, page 210

•ISE-3395 Serial Number Location, page 214

•Cisco ISE-3395 Front and Rear Panels, page 214

•Cisco Product Identification Tool, page 218

ISE-3300 Series Appliance Overview

The ISE-3300 series appliances can all be mounted in a standard shelf-rack enclosure. This section

provides descriptions of the supported ISE-3300 series appliances in this release:

•ISE-3315 Appliance Overview, page 22

•ISE-3355 and ISE-3395 Appliance Overview, page 23

Beta Draft - Cisco Confidential

2-2

Cisco Identity Services Engine Appliance Hardware Installation Guide 1.0

OL-22971-01

Chapter 2 Introducing the Cisco ISE-3300 Series Hardware

Product Overview

ISE-3315 Appliance Overview

The Cisco 3315 (ISE-3315) is intended for small network environments and the following list provides

some general physical, environmental, and feature information about the ISE-3315 appliance (for more

details, see Table 2-1):

•Weight—from 24.25 lb (11.0 kg) to 28.0 lb (12.7 kg) depending on what options are installed.

•Dimensions—1.75 inches high x 17.3 inches wide x 22.0 inches deep (44.5 mm x 440.0 mm x

559.0 mm); these dimensions do not include the rack handles.

•Cooling fans—five (plus two on the power supply).

•Rack mounting—Uses slide-rails (see Installing the Slide Rails in a Rack, page 44); mounts in a

standard 19-inch (48.3 cm), 4-post equipment rack (using the provided rack-mount brackets).

•Maximum operating altitude—7,000 feet (2,133 meters).

•Operating temperature range—50 to 90° F (10 to 35° C) up to 3,000 feet (914.4 meters); 50 to 90° F

(10 to 32° C) 3,000 to 7,000 feet (914.4 to 2,133 meters).

•Power—configured for AC-input power; has a single auto-ranging AC-input power supply.

•Front-panel features:

–

Power status LED

–

Power button

–

Reset button

–

Hard disk drive (HDD) activity LED

–

Locator button/LED

–

System health LED

–

USB port 1 and port 2

–

Two HDD bays

–

CD-ROM/DVD drive

For the location of the front panel features, see ISE-3315 Front Panel Features, page 27.

•Rear panel features:

–

NIC 1 (eth0) activity LED

–

NIC 1 (eth0) link LED

–

NIC 2 (eth10) activity LED

–

NIC 2 (eth1) link LED

–

Power supply cable socket

–

NIC 3 (eth2) and NIC 4 (eth3) add-on cards

–

Serial port

–

Video port

–

NIC 2 (eth1) and NIC 1 (eth0) Gigabit Ethernet interfaces

–

USB port 3 and port 4

–

Console port

For the location of the rear panel features, see ISE-3315 Rear Panel Features, page 28.

Beta Draft - Cisco Confidential

2-3

Cisco Identity Services Engine Appliance Hardware Installation Guide 1.0

OL-22971-01

Chapter 2 Introducing the Cisco ISE-3300 Series Hardware

Product Overview

The ISE-3315 appliance is based on the IBM System x3250M2 server platform, and is normally

shipped with a rack-mount hardware kit that includes brackets or rails for mounting it in a 4-post

equipment rack. For more information, see Mounting an ISE-3300 Series Appliance in a 4-Post

Rack, page 42.

ISE-3355 and ISE-3395 Appliance Overview

The Cisco 3355 and Cisco 3395 (ISE-3315 and ISE-3395) are intended for the medium and large

network environments, respectively. Both these appliances are based upon the same physical platform,

and the following list provides some general physical, environmental, and feature information about the

ISE-3355 and ISE-3395 appliances (for more details, see Table 2-1):

•Weight—from 28 lb (12.7 kg) to 34.5 lb (15.6 kg) depending on what options are installed.

•Dimensions—1.7 inches high x 17.3 inches wide x 28.0 inches deep (43 mm x 440.0 mm x

711.4 mm); these dimensions do not include the rack handles.

•Cooling fans—six for single-processor (ISE-3355) or dual-processor (ISE-3395).

•Rack mounting—Uses slide-rails (see Installing the Slide Rails in a Rack, page 44); mounts in a

standard 19-inch (48.3 cm), 4-post equipment rack (using the provided rack-mount brackets).

•Maximum operating altitude—7,000 feet (2,133 meters).

•Operating temperature range—50 to 90° F (10 to 35° C) up to 3,000 feet (914.4 meters); 50 to 90° F

(10 to 32° C) 3,000 to 7,000 feet (914.4 to 2,133 meters).

•Power—configured for AC-input power; has dual redundant auto-switching power supplies.

•Front-panel features:

–

Power button with LED (bi-color, green and amber)

–

Power button switch cover

–

Two HDDs (bay 0 and 1)

–

Four empty HDDs bays

–

USB port 1 and port 2

–

CD-ROM/DVD drive

–

Operator information panel

–

Operator information panel release switch

–

Video port

–

HDD activity LED

–

HDD status LED

–

Ethernet interfaces status LED

–

Ethernet interface activity LEDs (NIC 1 and NIC 2)

–

Ethernet interface activity LEDs (NIC 3 and NIC 4)

–

Information LED

–

System health LED

–

Locator button/LED

For the location of the front panel features, see ISE-3355 Front Panel Features, page 210 or

ISE-3395 Front Panel Features, page 214.

Beta Draft - Cisco Confidential

2-4

Cisco Identity Services Engine Appliance Hardware Installation Guide 1.0

OL-22971-01

Chapter 2 Introducing the Cisco ISE-3300 Series Hardware

Cisco ISE and FIPS-Compliance

•Rear panel features:

–

Empty (unused) PCI Express slot

–

Video port

–

USB port 3 and port 4

–

Power supply cable sockets

–

Serial Port

–

NIC 2 (eth1) and NIC 1 (eth0) Gigabit Ethernet interfaces

–

NIC 3 (eth2) and NIC 4 (eth3) add-on cards

–

NIC 1 (eth0) activity LED

–

NIC 1 (eth0) link LED

–

AC power LED

–

DC power LED

–

Power supply error LED

–

System error LED

–

Locator LED

–

Power LED

–

Console port

For the location of the rear panel features, see ISE-3355 Rear Panel Features, page 212 or ISE-3395

Rear Panel Features, page 216.

The ISE-3355/ISE-3395 appliances are based on the IBM System 3550M2 server platform and are

normally shipped with a rack-mount hardware kit that includes brackets or rails for mounting it in

a 4-post equipment rack. For more information, see Mounting an ISE-3300 Series Appliance in a

4-Post Rack, page 42

Note The rack-mount hardware kits for ISE-3300 series appliances do not include a 2-post equipment

rack.

Cisco ISE and FIPS-Compliance

This release of the supported Cisco Identity Services Engine (ISE-3300 series) appliances are non-FIPS

compliant Linux-based network hardware platforms. In Release 1.0, the Cisco ISE operating system

comprises a hardened Linux kernel based on CentOS 5.3, and runs the Application Deployment Engine

operating system (ADE-OS) version 2.0 and the Cisco ISE Release 1.0 system software.

The ADE-OS and Cisco ISE system software run on either a dedicated Cisco Identity Services Engine

appliance or on a VMware server (Cisco ISE-VM-K9). Cisco ISE does not support the installation of

any other packages or applications on this dedicated platform. FIPS 140-2 compliance will be addressed

in future releases of Cisco ISE.

Cisco ISE Release 1.0 only supports installations on the following Cisco ISE 3300-series appliance

platforms:

•ISE-3315

•ISE-3355

Beta Draft - Cisco Confidential

2-5

Cisco Identity Services Engine Appliance Hardware Installation Guide 1.0

OL-22971-01

Chapter 2 Introducing the Cisco ISE-3300 Series Hardware

ISE-3315, ISE-3355, and ISE-3395 Hardware Summary

•ISE-3395

Refer to the Release Notes for Cisco Identity Service Engine, Release 1.0 for additional hardware

compatibility information. Table 2-1 summarizes the hardware specifications for each of the supported

Cisco ISE appliances.

See the “Diagrams” column for hyperlinks to detailed diagrams showing NIC ports, power supply

sockets, LEDs, and important controls or buttons on the corresponding panel.

ISE-3315, ISE-3355, and ISE-3395 Hardware Summary

Table 2-1 Cisco ISE Appliance Hardware Summary

Cisco ISE Appliance Product Hardware Specifications Diagrams

ISE-3315 Platform

Supports the following:

•Between 50 and 500 concurrent

users

•Up to three standalone or High

Availability (HA) pairs

•Single processor: Quad-core Intel Xeon (Core 2

quad)

•4GB RAM

•250GB SATA HDD

•4 10/100/1000 LAN ports [2 integrated NICs; 2

Gigabit NICs (PCI-E)]

•CD/DVD-ROM Drive

•4 USB Ports (2 front, 2 rear)

•Power supply: 350W

Note The ISE-3315 is based on the IBM System

x3250 M2 server platform.

•Figure 2-2 on

page 2-7, “Cisco

ISE-3315 Front Panel

Features”

•Figure 2-3 on

page 2-7, “Cisco

ISE-3315 Front Panel

LEDs/Buttons”

•Figure 2-4 on

page 2-8,“Cisco

ISE-3315 Rear Panel

Features”

•Figure 2-5 on

page 2-9, “Cisco

ISE-3315 Rear Panel

LEDs”

ISE-3355 Platform

Supports the following:

•Between 500 and 1000

concurrent users

•Up to 20 standalone or HA-pairs

•Single processor: Quad-core Intel Xeon (Nehalem)

•4 GB RAM

•2 x 300 GB SAS RAID HDD

•4 10/100/1000 LAN ports [2 integrated NICs; 2

Gigabit NICs (PCI-E)]

•CD/DVD-ROM Drive

•4 USB Ports (1 front, 1 internal, 2 rear)

•Cavium CN1120-NHB-E SSL Accelerator Card or

nCipher Card (FIPS 140-2 Level 2 Common

Criteria EAL2)

•Power supply: Dual 675W (redundant)

Note The ISE-3355 is based on the IBM System

x3550 M2 server platform.

•Figure 2-7 on

page 2-10, “Cisco

ISE-3355 Front

Panel”

•Figure 2-8 on

page 2-11, “Cisco

ISE-3355 Front Panel

LEDs/Buttons”

•Figure 2-9 on

page 2-12, “Cisco

ISE-3355 Rear Panel

Features”

•Figure 2-10 on

page 2-13, “Cisco

ISE-3355 Rear Panel

LEDs”

Beta Draft - Cisco Confidential

2-6

Cisco Identity Services Engine Appliance Hardware Installation Guide 1.0

OL-22971-01

Chapter 2 Introducing the Cisco ISE-3300 Series Hardware

ISE-3315, ISE-3355, and ISE-3395 Hardware Summary

ISE-3315 Serial Number Location

The serial number label is located at the lower left of the front-panel of the ISE-3315 (see Figure 2-1).

CPI figure for the Cisco ISE-3315 still needs to be created.

Figure 2-1 Cisco ISE-3315 Appliance Serial Number Location

Note The serial number for the ISE-3315 is seven characters in length. You can also view the ISE-3315 serial

number location on the Cisco Support website using the Cisco Product Identification Tool. For details,

see Cisco Product Identification Tool, page 218.

Cisco ISE-3315 Front and Rear Panels

The Cisco ISE-3315 platform is recommended for deployments serving from between 100 and 500 users

and managing up to three additional appliances or three HA pairs. The Cisco ISE-3315 comes equipped

with four network interfaces that provide flexibility in NIC interface selection and also make it capable

for use in high-availability configurations. For additional details, see Cisco ISE and FIPS-Compliance,

page 24.

ISE-3395 Platform

Supports the following:

•Between 1000 and 5000

concurrent users

•Up to 40 standalone or HA-pairs

•Dual processor: 2 x Quad-core Intel Xeon

(Nehalem)

•8GB RAM

•4 x 300 GB SAS RAID HDD

•4 10/100/1000 LAN ports [2 integrated NICs; 2

Gigabit NICs (PCI-E)]

•CD/DVD-ROM Drive

•4 USB Ports (1 front, 1 internal, 2 rear)

•Cavium CN1120-NHB-E SSL Accelerator Card or

nCipher Card (FIPS 140-2 Level 2 Common

Criteria EAL2)

•Power supply: Dual 675W (redundant)

Note The ISE-3395 is based on the IBM System

x3550 M2 server platform.

•Figure 2-12 on

page 2-14, “Cisco

ISE-3395 Front Panel

Features”

•Figure 2-13 on

page 2-15, “Cisco

ISE-3395 Front Panel

LEDs/Buttons”

•Figure 2-14 on

page 2-16, “Cisco

ISE-3395 Rear Panel

Features”

•Figure 2-15 on

page 2-17, “Cisco

ISE-3395 Rear Panel

LEDs”

Table 2-1 Cisco ISE Appliance Hardware Summary (continued)

Cisco ISE Appliance Product Hardware Specifications Diagrams

279775

Cisco ISE 3315 Series

Identity Services Engine

CISCO

XXXXNNNNNNN

Beta Draft - Cisco Confidential

2-7

Cisco Identity Services Engine Appliance Hardware Installation Guide 1.0

OL-22971-01

Chapter 2 Introducing the Cisco ISE-3300 Series Hardware

ISE-3315, ISE-3355, and ISE-3395 Hardware Summary

ISE-3315 Front Panel Features

Figure 2-2, Figure 2-3, and the accompanying tables illustrate and describe the ISE-3315 front panel

features, LEDs, and buttons.

Figure 2-2 Cisco ISE-3315 Front Panel Features

Figure 2-3 Cisco ISE-3315 Front Panel LEDs/Buttons

1Front USB Port 1 4HDD Bay 2

2Front USB Port 2 5CD-ROM/DVD Drive

3Hard Disk Drive (HDD) Bay 0

Cisco ISE 3315 Series

Identity Services Engine

CISCO

1 3 4

195197

1Power Status LED Green = The appliance has AC power and is powered up

Off = The appliance is powered off (AC power disconnected)

2Power Button (Recessed)

3Reset Button (Recessed)

195198

Cisco ISE 3315 Series

Identity Services Engine

CISCO

Beta Draft - Cisco Confidential

2-8

Cisco Identity Services Engine Appliance Hardware Installation Guide 1.0

OL-22971-01

Chapter 2 Introducing the Cisco ISE-3300 Series Hardware

ISE-3315, ISE-3355, and ISE-3395 Hardware Summary

ISE-3315 Rear Panel Features

Figure 2-4, Figure 2-5, and the accompanying tables illustrate and describe the ISE-3315 rear panel

features and LEDs.

Figure 2-4 Cisco ISE-3315 Rear Panel Features

4HDD Activity LED Flashing green = Ongoing drive activity

Off = No drive activity

5Locator Button/LED Flashing blue = The Locator button has been pressed

6System Health LED Off = System health is normal

Amber = A pre-failure system threshold has been reached, which

can be caused by any of the following conditions:

•At least one fan failure (system or processor fan)

•At least one of the temperature sensors reached critical level

(system or processor thermal sensors)

•At least one memory module failure

•A power supply unit error has occurred

1Power Supply Cable Socket 7NIC 1 (eth0) GbE Interface

2NIC 3 (eth2) Add-On Card 8Rear USB Port 4

3NIC 4 (eth3) Add-On Card 9Rear USB Port 3

4Serial Port 10 Console Port

5Video Port

6NIC 2 (eth1) GbE Interface

Beta Draft - Cisco Confidential

2-9

Cisco Identity Services Engine Appliance Hardware Installation Guide 1.0

OL-22971-01

Chapter 2 Introducing the Cisco ISE-3300 Series Hardware

ISE-3315, ISE-3355, and ISE-3395 Hardware Summary

Figure 2-5 Cisco ISE-3315 Rear Panel LEDs

ISE-3355 Serial Number Location

The serial number label is located at the lower left of the front-panel of the ISE-3355. (See Figure 2-6.)

CPI figure for the Cisco ISE-3355 still needs to be created.

Figure 2-6 ISE-3355 Appliance Serial Number Location

Note The serial number for the ISE-3355 is seven characters in length. You can also view the ISE-3355 serial

number location on the Cisco Support website using the Cisco Product Identification Tool. For details,

see Cisco Product Identification Tool, page 218.

1NIC 1 (eth0) Activity LED Green = Activity exists

Flashing green = Activity exists

Off = No activity exists

2NIC 1 (eth0) link LED Green = Link exists

Off = No link exists

3NIC 2 (eth1) activity LED Green = Activity exists

Flashing green = Activity exists

Off = No activity exists

4NIC 2 (eth1) link LED Green = Link exists

Off = No link exists

Cisco ISE 3355 Series

Identity Services Engine

279776

CISCO

XXXXNNNNNNN

Beta Draft - Cisco Confidential

2-10

Cisco Identity Services Engine Appliance Hardware Installation Guide 1.0

OL-22971-01

Chapter 2 Introducing the Cisco ISE-3300 Series Hardware

ISE-3315, ISE-3355, and ISE-3395 Hardware Summary

Cisco ISE-3355 Front and Rear Panels

The Cisco ISE-3355 platform provides enhanced capability for enterprise-wide deployments serving

from between 1500 and 3500 users and managing up to 20 other appliances or HA pairs.

Similar to the Cisco ISE-3315, the Cisco ISE-3355 comes equipped with four network interfaces that

provide flexibility in NIC interface selection and also make it capable for use in high availability

configurations.

The Cisco ISE-3355 additionally provides 2 GB of RAM, two SAS drives configured in RAID 0 and 1,

dual power supplies, and an SSL accelerator card to support larger network deployments and provide

added reliability for a centralized management of the deployment in the network core. For additional

details, see Cisco ISE and FIPS-Compliance, page 24.

ISE-3355 Front Panel Features

Figure 2-7, Figure 2-8, and the accompanying tables illustrate and describe the ISE-3355 front panel

features, LEDs, and buttons.

Figure 2-7 Cisco ISE-3355 Front Panel

1Hard Disk Drive (HDD) Bay 0 8Front USB Port 1

2Empty (unused) HDD Bay1

1. Cisco does not support installing additional hard drives in the ISE-3355 appliance.

9Front USB Port 2

3Empty (unused) HDD Bay110 CD-ROM/DVD Drive

4Power Button with LED Indicator

(bi-color: green/amber)

11 Empty (unused) HDD Bay1

5Operator Information Panel 12 Empty (unused) HDD Bay1

6Operator Information Panel Release Switch 13 HDD Bay 1

7Video Port

Cisco ISE 3355 Series

Identity Services Engine

195201

CISCO

1 2 3 4 5 6 7 8

910

13 12 11

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cisco Server Handbücher

Cisco

Cisco SFS 7008P Bedienungs- und Wartungsanleitung

Cisco

Cisco UCS X9508 Kurzanleitung

Cisco

Cisco UCS C240 M4 Montage- und Wartungsanleitung

Cisco

Cisco AS5300 - Universal Access Server Technisches Dokument

Cisco

Cisco UCS B440-M1 Bedienungsanleitung

Cisco

Cisco ONS 15454 Series Bedienungsanleitung

Cisco

Cisco C800 Series Betriebsanleitung

Cisco

Cisco SCE8000 GBE Bedienerhandbuch

Cisco

Cisco UCS B200 M3 Handbuch

Cisco

Cisco UCS C22 M3 Bedienungsanleitung

Cisco

Cisco 7835-H2 - Media Convergence Server Bedienungsanleitung

Cisco

Cisco APP1000 - One Application Server Appliance Bedienungsanleitung

Cisco

Cisco GSS-4492R-K9 Bedienungsanleitung

Cisco

Cisco AS5300-96VOIP-A Bedienungsanleitung

Cisco

Cisco UCS 5100 Kurzanleitung

Cisco

Cisco UCS C24 Montage- und Wartungsanleitung

Cisco

Cisco Firepower 1120 Bedienungsanleitung

Cisco

Cisco TelePresence MSE 8710 Bedienungsanleitung

Cisco

Cisco Cisco MeetingPlace Express Betriebsanleitung

Cisco

Cisco UCS C460 Montage- und Wartungsanleitung

Cisco

Cisco TelePresence Bedienungsanleitung

Cisco

Cisco UCS C200 Montage- und Wartungsanleitung

Cisco

Cisco PDS2000 Bedienungsanleitung

Cisco

Cisco TelePresence MSE 8710 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung