Cisco MXE 3500 Handbuch

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Quick Start Hardware Installation Guide for

Cisco Media Experience Engine 3500

Revised: December 14, 2011, 78-19964-03

The Cisco Media Experience Engine (MXE) 3500 is an appliance that runs Cisco MXE 3500 Release

3.3 software.

This document provides an overview of the Cisco MXE 3500 hardware and instructions on how to enter

the initial software configuration. After completing the initial configuration, use the web user interface

(UI) to further configure the device.

For additional installation and configuration information, see the Cisco MXE 3500 documentation on

Cisco.com. For system requirements, important notes, limitations, open and resolved bugs, and

last-minute documentation updates, see the release notes, also on Cisco.com.

•Shipping Carton Contents, page 1

•Installation Overview, page 2

•Powering and Configuring the Cisco MXE 3500, page 4

•Next Steps, page 5

•Related Documentation, page 5

Shipping Carton Contents

Verify the contents of the shipping carton to ensure that you have all items necessary to install the

Cisco MXE 3500. Save the packing material in case you need to repack the unit. If any item is missing

or damaged, contact your Cisco representative or reseller for instructions.

The shipping carton includes these items:

•4-post rail kit

•Cisco MXE 3500

•Keyboard, video, mouse (KVM) cable

•RJ-45 straight-through Ethernet cable

•RJ-45-to-DB-9 serial cable

Quick Start Hardware Installation Guide for Cisco Media Experience Engine 3500

78-19964-03

Installation Overview

•Power cord

•Printed documentation

•Software License Claim Certificate

•Cisco MXE 3500 Installation DVD

•(Standalone and Resource Manager appliances only) Cisco Resource Manager DVD 1-2 and DVD

2-2

•(Resource Node appliances only) Cisco Resource Node DVD 1-2 and DVD 2-2

Installation Overview

Before installing the Cisco MXE 3500, read the Regulatory Compliance and Safety Information for

Cisco MXE 3500 on Cisco.com.

See the Hardware Installation Guide for Cisco Media Experience Engine 3500 on Cisco.com for the

following:

•Select and prepare an installation site that meet requirements.

•Rack mounting instructions. The Cisco MXE 3500 occupies one rack unit. A 4-post rail kit is

included in the shipment.

Caution We recommend that you use the supplied attachment hardware to rack-mount the system. Failure to use

the correct hardware or to follow the correct procedures could result in damage to the system.

Use the following information when connecting peripheral cables and power cords to the rear panel of

the Cisco MXE 3500.

Warning

To reduce the risk of electric shock, fire, or damage to the equipment, do not plug telephone or

telecommunications connectors into RJ-45 connectors.

EU Authorized Representative:

Edgard Vangeel

Cisco Systems Belgium

De Kleetlaan 6A

B 1831 Diegem

Belgium

330258

Quick Start Hardware Installation Guide for Cisco Media Experience Engine 3500

78-19964-03

Installation Overview

Figure 1 shows the Cisco MXE 3500 front panel components. Figure 2 shows the rear panel

components.

Figure 1 Cisco MXE 3500 Front Panel

Figure 2 Cisco MXE 3500 Rear Panel

1DVD-RW drive—do not remove the DVD-RW 7CPU fault LED

2Hard drive (four)—do not remove the hard drives 8Network activity LED

3Console connector 9System fault LED

4Reset button

Caution Pressing the Reset button will reboot

the Cisco MXE 3500 application. Any

changes stored in memory will be lost.

10 Locator button and LED

5Power supply fault LED 11 Power button and power status LED

6Memory fault LED — —

Console Reset PSUMEM CPU Cisco MXE 3500

MediaExperience Engine

246918

127

589

10 11

1Power supply (two—the second power supply

is optional)

5Video connector (DB15 VGA)

210/100 Ethernet management port (RJ-45) 6Low-profile PCIe card slot

3USB 2.0 connectors (two) 710/100/1000 Gigabit Ethernet port 1—use

only port 1 to connect to the network

4Serial connector (DB9)—not used 810/100/1000 Gigabit Ethernet ports—not

used

1/M

14 6

25 7

300085

Quick Start Hardware Installation Guide for Cisco Media Experience Engine 3500

78-19964-03

Powering and Configuring the Cisco MXE 3500

Perform the initial configuration described in this section to enter the IP address for the appliance and

set the password for the administrator account. The initial configuration enables the Cisco MXE 3500 to

connect to the LAN. You can then access the Cisco MXE 3500 Web UI and Windows desktop at the

Cisco MXE 3500 IP address for additional configuration.

The following equipment is required to perform the initial configuration:

•Keyboard with USB connector

•Monitor

Follow these steps for initial configuration:

Step 1 Connect the keyboard and monitor to the Cisco MXE 3500 rear panel. Connect your network cable to

the 10/100/1000 Ethernet port 1 (see Figure 2).

Step 2 Press the power on/off/LED button on the Cisco MXE 3500 front panel.

Step 3 Press Alt+F1 and then press Enter.

Note Wait a few minutes while the system boots. You will get a login prompt when the system is ready.

Step 4 Log in with the following default credentials:

•User Name: admin

•Password: change_it

The configuration wizard launches, and Configure Network Settings screen displays.

Step 5 Enter these required network settings: IP Address, Network Mask, and Default Gateway, then click

Next to continue. The Please Wait screen displays.

Warning

The address range of 192.168.1.0/29 is reserved for use by the Cisco MXE 3500 appliance. Do not

configure the IP address in this range.

Step 6 Click OK. The Success screen displays.

Step 7 Click OK. The Configure Hostname and Domain Name screen displays.

Step 8 (Optional) Enter a hostname and domain name and click Next. The Configure DNS Server screen

displays.

Step 9 (Optional) Enter a DNS server and click Next. The Configure NTP Server screen displays.

Step 10 (Optional) Enter an NTP server and click Next. The Modify and Synchronize Admin Password screen

displays.

Step 11 Enter and re-enter a new password for the admin user account and click Next. The Please Wait screen

displays.

Note This updates and synchronizes the administrator account password for the Linux OS, Windows

OS, ESXi, and Cisco MXE 3500 web UI.

Step 12 Click OK. The Password Changed screen displays.

Quick Start Hardware Installation Guide for Cisco Media Experience Engine 3500

78-19964-03

Next Steps

Step 13 Click OK. The Enable/Disable Shared Folder Password screen displays.

Step 14 (Optional) Press the spacebar to require a password for shared folders and click Next. The Configuration

Complete screen displays.

Note If you enable shared folder password, you must configure the password after you complete initial

setup.

Step 15 Click OK. You have completed initial configuration.

You can now access the Cisco MXE 3500 web UI at this URL: http://mxe_IP_address/mxeui/. The user

name is admin, and enter the password created in Step 11.

Next Steps

After initial configuration is completed, perform the following tasks:

•Install QuickTime—QuickTime is installed separately because of Apple licensing requirements. It

is required for transcoding to and from specific formats. You can obtain the supported QuickTime

version 7.7 at http://support.apple.com/kb/DL837.

•Install Licenses—Obtain and install the full Cisco MXE 3500 Release 3.3 license with the base PID

and any optional feature PIDs. The Software License Claim Certificate that ships with your

Cisco MXE 3500 appliance contains instructions on how to obtain licenses.

•Configure the Cisco MXE 3500—Your Cisco MXE 3500 appliance comes configured with some

system and user settings. After installing the Cisco MXE 3500 Release 3.3 license, access the

Cisco MXE 3500 web UI to perform the required configuration tasks.

The above tasks are described in the “Configuration and Administration Tasks” section of the

Administration Guide for Cisco Media Experience Engine 3500.

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung