Cisco UCS E Series Bedienungsanleitung

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Hardware Installation Guide for

Cisco UCS E-Series Servers

First Published: February 4, 2014

Updated: August 18, 2014

OL-26447-03

This document provides installation information for the Cisco UCS E-Series Servers (E-Series Servers).

It includes the following sections:

•New and Changed Information, page 2

•Cisco UCS E-Series Servers Overview, page 3

•Hardware Requirements, page 3

•E-Series Servers, page 7

•Understanding the E-Series Server LED State, page 13

•Recommended Safety Practices for Installing Cisco UCS E-Series Servers, page 15

•Installing the E-Series Servers, page 19

•Migrating the E-Series Server from an ISR G2 into a Cisco ISR 4451-X, page 28

•Online Insertion and Removal, page 29

•Installing or Replacing Hard Disk Drives on the E-Series Servers, page 32

•Replacing the PCIe Assembly in a Double-Wide E-Series Server, page 36

•Installing and Replacing the Memory DIMMS, page 38

•Removing the COA, page 43

•Cisco Integrated Management Controller, page 44

•Related Documentation, page 45

Hardware Installation Guide for Cisco UCS E-Series Servers

OL-26447-03

New and Changed Information

The following tables provide an overview of the significant changes that are introduced to this guide in

an appropriate software release.

Table 1 New and Changed Information for Software Release 2.3.1

Feature Description

Changed in

Software Release Where Documented

Double-Wide E-Series Server

refresh

Intel Ivy Bridge 2418L v2 and

2428L v2 support added on the

UCS-E160D-M2 and

UCS-E180D-M2 double-wide

E-Series Servers.

2.3.1 “Hardware Information for the

M2 E-Series Servers” section on

page 5

Table 2 New and Changed Information for Software Release 2.2.1

Feature Description

Changed in

Software Release Where Documented

SM E-Series Network

Compute Engine

Support added to install the SM

E-Series Network Compute Engine

(SM E-Series NCE) into the

Generation 2 Cisco Integrated

Services Routers (ISR G2) and the

Cisco 4451-X Integrated Services

Router (Cisco ISR 4451-X).

2.2.1 “Hardware Information for the

M2 E-Series Servers” section on

page 5

Single-Wide E-Series Server

refresh

Intel Ivy Bridge E3-1105C v2

support added on the

UCS-E140S-M2 single-wide

E-Series Server.

2.2.1 “Hardware Information for the

M2 E-Series Servers” section on

page 5

Table 3 New and Changed Information for Software Release 1.0(2)

Feature Description

Changed in

Software Release Where Documented

New Platform Support Support added to install the

E-Series Server into the Cisco ISR

4451-X.

1.0(2) •“Cisco UCS E-Series Servers

Overview” section on page 3

•“Hardware Requirements”

section on page 3

Verifying E-Series Server

Installation

Command to verify that the router

recognizes the E-Series Server.

1.0(2) “Verifying E-Series Server

Installation” section on page 27

Hardware Installation Guide for Cisco UCS E-Series Servers

OL-26447-03

Cisco UCS E-Series Servers Overview

The Cisco UCS E-Series Servers (E-Series Servers) are the next generation of Cisco UCS Express

servers. E-Series Servers are a family of size, weight, and power-efficient blade servers that are housed

within the Generation 2 Cisco Integrated Services Routers (ISR G2) and the Cisco 4451-X Integrated

Services Router (Cisco ISR 4451-X). These servers provide a general purpose compute platform for

branch-office applications deployed either as bare-metal on operating systems, such as Microsoft

Windows or Linux, or as virtual machines on hypervisors, such as VMware vSphere Hypervisor,

Microsoft Hyper-V, or Citrix XenServer.

Hardware Requirements

E-Series Servers reside in the Cisco 2900 series and 3900 series ISR G2, and the Cisco ISR 4451-X.

The following M1 E-Series Servers are supported:

•UCS-E140S-M1—Single-wide E-Series Server, 4-cores CPU, 1.0 GHz clock speed

•UCS-E140D-M1—Double-wide E-Series Server, 4-cores CPU, 2.0 GHz clock speed

•UCS-E160D-M1—Double-wide E-Series Server, 6-cores CPU, 1.8 GHz clock speed

•UCS-E140DP-M1—Double-wide E-Series Server, 4-cores CPU, with PCIe, 2.0 GHz clock speed

•UCS-E160DP-M1—Double-wide E-Series Server, 6-cores CPU, with PCIe, 1.8 GHz clock speed

The following M2 E-Series Servers are supported:

•UCS-EN120S-M2—SM E-Series Network Compute Engine (SM E-Series NCE), 2-cores CPU, 2.0

GHz clock speed

•UCS-E140S-M2—Single-wide E-Series Server, 4-cores CPU, 1.8 GHz clock speed

•UCS-E160D-M2—Double-wide E-Series Server, 6-cores CPU, 2.0 GHz clock speed

•UCS-E180D-M2—Double-wide E-Series Server, 8-cores CPU, 1.8 GHz clock speed

Note The M1 and M2 E-Series Servers naming terminology indicates different generations of Intel processors

within the respective servers.

Migrating the E-Series Server

from an ISR G2 into a

Cisco ISR 4451-X

Special instructions for migrating

the E-Series Server from an ISR

G2 into a Cisco ISR 4451-X.

1.0(2) “Migrating the E-Series Server

from an ISR G2 into a

Cisco ISR 4451-X” section on

page 28

New Online Insertion and

Removal (OIR) command

New OIR command for E-Series

Server installed in a

Cisco ISR 4451-X.

1.0(2) “Removing the E-Series Server

from a Cisco ISR 4451-X”

section on page 31

Table 3 New and Changed Information for Software Release 1.0(2)

Feature Description

Changed in

Software Release Where Documented

Hardware Installation Guide for Cisco UCS E-Series Servers

OL-26447-03

Hardware Requirements

Hardware Information for the M1 E-Series Servers

The following table provides hardware information for the M1 E-Series Servers.

Table 4 M1 E-Series Servers Hardware at a Glance

Feature

UCS-E140S-M1

Single-Wide E-Series Server

UCS-E140D-M1 and

UCS-E160D-M1

Double-Wide E-Series Servers

UCS-E140DP-M1 and

UCS-E160DP-M1

Double-Wide E-Series Servers

with PCIe

Form Factor Single-wide SM Double-wide SM Double-wide SM

CPU Intel Xeon

E3-1105C

Intel Xeon

E5-2418L and E5-2428L

Intel Xeon

E5-2418L and E5-2428L

CPU Cores and

CPU Clock Speed

4-Cores with 1.0 GHz Clock

Speed

4-Cores with 2.0 GHz Clock

Speed

6-Cores with 1.8 GHz Clock

Speed

4-Cores with 2.0 GHz Clock

Speed

6-Cores with 1.8 GHz Clock

Speed

Memory DIMM

Slots

2 Slots 3 Slots 3 Slots

RAM 8 GB to 16 GB

Supports DDR3 1333 MHz VLP

UDIMM 1.5 V, 4 GB, and 8 GB

8 GB to 48 GB

Supports DDR3 1333 MHz

RDIMM 1.35 V, 4 GB, 8 GB, and

16 GB

8 GB to 48 GB

Supports DDR3 1333 MHz

RDIMM 1.35 V, 4 GB, 8 GB, and

16 GB

RAID RAID 0 and RAID 1 RAID 0, RAID 1, and RAID 5 RAID 0 and RAID 1

Storage Type SATA, SAS, SSD, and SED SATA, SAS, SSD, and SED SATA, SAS, SSD, and SED

HDD SAS 10K RPM, SATA 7200 RPM,

and SAS SSD Drives1

Supports 2 Drives

SAS 10K RPM, SATA 7200

RPM, and SAS SSD Drives1

Supports 3 Drives

SAS 10K RPM, SATA 7200

RPM, and SAS SSD Drives1

Supports 2 Drives

Storage Capacity 200 GB to 2 TB 200 GB to 3 TB 200 GB to 2 TB

Internal Network

Interface

2 Gigabit Ethernet Interfaces 2 Gigabit Ethernet Interfaces 2 Gigabit Ethernet Interfaces

External

Interfaces

1 USB Connector

1 RJ-45 Gigabit Ethernet

Connector

1 Management Port

1 KVM Port (Supports VGA,

1 USB, 1 Serial DB9)

2 USB Connectors

2 RJ-45 Gigabit Ethernet

Connectors

1 Management Port

1 VGA Port

1 Serial DB9

2 USB Connectors

2 RJ-45 Gigabit Ethernet

Connectors

1 Management Port

1 VGA Port

1 Serial DB9

Hardware Installation Guide for Cisco UCS E-Series Servers

OL-26447-03

Hardware Requirements

Hardware Information for the M2 E-Series Servers

The following table provides hardware information for the M2 E-Series Servers.

Router Platforms 2911, 2921, 2951, 3925, 3925e,

3945, 3945e, 4451-X

2921, 2951, 3925, 3925e, 3945,

3945e, 4451-X

2921, 2951, 3925, 3925e, 3945,

3945e, 4451-X

Maximum

Number of

E-Series Servers

per Router

2911 ISR G2—1 E-Series Server

2921 ISR G2—1 E-Series Server

2951 ISR G2—2 E-Series Servers

3925 ISR G2—2 E-Series Servers

3925e ISR G2—2 E-Series

Servers

3945 ISR G2—4 E-Series Servers

3945e ISR G2—4 E-Series

Servers

ISR 4451-X—2 E-Series Servers

2911 ISR G2—None

2921 ISR G2—1 E-Series Server

2951 ISR G2—1 E-Series Server

Note The Cisco 2921 and 2951

ISR G2 support 4-cores

only.

3925 ISR G2—1 E-Series Server

3925e ISR G2—1 E-Series Server

3945 ISR G2—1 E-Series Server

3945e ISR G2—1 E-Series Server

ISR 4451-X—1 E-Series Server

2911 ISR G2—None

2921 ISR G2—1 E-Series Server

2951 ISR G2—1 E-Series Server

Note The Cisco 2921 and 2951

ISR G2 support 4-cores

only.

3925 ISR G2—1 E-Series Servers

3925e ISR G2—1 E-Series

Server

3945 ISR G2—1 E-Series Server

3945e ISR G2—1 E-Series

Server

ISR 4451-X—1 E-Series Server

1. All hardware drives within the E-Series Server must be installed with the same type of storage device; either all SAS drives or all SATA drives.

Table 4 M1 E-Series Servers Hardware at a Glance (continued)

Feature

UCS-E140S-M1

Single-Wide E-Series Server

UCS-E140D-M1 and

UCS-E160D-M1

Double-Wide E-Series Servers

UCS-E140DP-M1 and

UCS-E160DP-M1

Double-Wide E-Series Servers

with PCIe

Table 5 M2 E-Series Servers Hardware at a Glance

Feature

UCS-EN120S-M2

SM E-Series NCE

UCS-E140S M2

Single-Wide E-Series Server

UCS-E160D-M2 and UCS-E180D-M2

Double-Wide E-Series Servers

Form Factor Single-wide SM Single-wide SM Double-wide SM

CPU Pentium B925C Intel Xeon

E3-1105C v2

Intel Xeon

2418L v2 for 6 Core

2428L v2 for 8 Core

CPU Cores and

CPU Clock Speed

2 Core with 2.0 GHz Clock

Speed

4 Core with 1.8 GHz Clock

Speed

6 Core with 2.0 GHz Clock Speed

8 Core with 1.8 GHz Clock Speed

RAM 4 GB to 16 GB

Supports DDR3 1333 MHz

VLP UDIMM 1.5 V, 4 GB, and

8 GB

8 GB to 16 GB

Supports DDR3 1333 MHz VLP

UDIMM 1.5 V, 4 GB, and 8 GB

8 GB to 48 GB

Supports DDR3 1333 MHz RDIMM

1.35 V, 4 GB, 8 GB, and 16 GB

RAID RAID 0 and RAID 1 RAID 0 and RAID 1 RAID 0 and RAID 1

Storage Type SATA and SAS SATA, SAS, SSD, and SED SATA, SAS, SSD, and SED

Hardware Installation Guide for Cisco UCS E-Series Servers

OL-26447-03

Hardware Requirements

HDD SAS 10K RPM, SATA 7200

RPM

Supports 2 Drives

SAS 10K RPM, SATA 7200

RPM, and SAS SSD Drives1

Supports 2 Drives

SAS 10K RPM, SATA 7200 RPM,

and SAS SSD Drives1

Supports 3 Drives

Storage Capacity 500 GB to 2 TB 200 GB to 2 TB 200 GB to 3 TB

Internal Network

Interface

2 Gigabit Ethernet Interfaces 2 Gigabit Ethernet Interfaces 2 Gigabit Ethernet Interfaces

External Interfaces 1 USB Connector

1 RJ-45 Gigabit Ethernet

Connector

1 Management Port

1 KVM Port (Supports VGA,

1 USB, 1 Serial DB9)

1 USB Connector

1 RJ-45 Gigabit Ethernet

Connector

1 Management Port

1 KVM Port (Supports VGA,

1 USB, 1 Serial DB9)

2 USB Connectors

2 RJ-45 Gigabit Ethernet

Connectors

1 Management Port

1 VGA Port

1 Serial DB9

Router Platforms 2911, 2921, 2951, 3925, 3925e,

3945, 3945e, 4451-X

2911, 2921, 2951, 3925, 3925e,

3945, 3945e, 4451-X

2921, 2951, 3925, 3925e, 3945,

3945e, 4451-X

Maximum Number

of E-Series

Servers or NCE

per Router

2911 ISR G2—1 NCE

2921 ISR G2—1 NCE

2951 ISR G2—2 NCEs

3925 ISR G2—2 NCEs

3925e ISR G2—2 NCEs

3945 ISR G2—4 NCEs

3945e ISR G2—4 NCEs

ISR 4451-X—2 NCEs

2911 ISR G2—1 E-Series Server

2921 ISR G2—1 E-Series Server

2951 ISR G2—2 E-Series

Servers

3925 ISR G2—2 E-Series

Servers

3925e ISR G2—2 E-Series

Servers

3945 ISR G2—4 E-Series

Servers

3945e ISR G2—4 E-Series

Servers

ISR 4451-X—2 E-Series Servers

2911 ISR G2—None

2921 ISR G2—1 E-Series Server

2951 ISR G2—1 E-Series Server

Note The Cisco 2921 and 2951

ISR G2 support 6 cores only.

3925 ISR G2—1 E-Series Servers

3925e ISR G2—1 E-Series Server

3945 ISR G2—1 E-Series Server

3945e ISR G2—1 E-Series Server

ISR 4451-X—1 E-Series Server

1. All hardware drives within the E-Series Server must be installed with the same type of storage device; either all SAS drives or all SATA drives.

Table 5 M2 E-Series Servers Hardware at a Glance (continued)

Feature

UCS-EN120S-M2

SM E-Series NCE

UCS-E140S M2

Single-Wide E-Series Server

UCS-E160D-M2 and UCS-E180D-M2

Double-Wide E-Series Servers

Hardware Installation Guide for Cisco UCS E-Series Servers

OL-26447-03

E-Series Servers

Supported Cisco EtherSwitch EHWIC and Cisco EtherSwitch Service Modules

The following table shows the Cisco EtherSwitch Enhanced High-Speed WAN Interface Cards

(EHWICs) and Cisco EtherSwitch Service Modules that are supported on the E-Series Server.

Supported Transceivers

The following table lists the SFP transceivers that are supported on the E100-PCIE10GEFCOE.

E-Series Servers

E-Series Servers are available in the following two form factors:

•Single-Wide E-Series Server and the SM E-Series NCE, page 8

•Double-Wide E-Series Server, page 11

Table 6 Supported Cisco EtherSwitch EHWIC and Cisco EtherSwitch Service Modules

Cisco EtherSwitch EHWIC Cisco EtherSwitch Service Module

•EHWIC-D-8ESG-P=

•EHWIC-D-8ESG-P

•EHWIC-D-8ESG=

•EHWIC-D-8ESG

•EHWIC-4ESG-P=

•EHWIC-4ESG-P

•EHWIC-4ESG=

•EHWIC-4ESG

•SM-D-ES3G-48-P

•SM-D-ES3-48-P

•SM-D-ES2-48

•SM-ES3G-24-P

•SM-ES3-24-P

•SM-ES2-24-P

•SM-ES2-24

•SM-ES3G-16-P

•SM-X-ES3D-48-P

•SM-X-ES3-24-P

•SM-X-ES3-16-P

Table 7 SFP Transceivers Supported on the E100-PCIE10GEFCOE

SFP Description

SFP-H10GB-CU1M SFP+ 10GBASE-CU 1-meter cable, passive

SFP-H10GB-CU3M SFP+ 10GBASE-CU 3-meter cable, passive

SFP-H10GB-CU5M SFP+ 10GBASE-CU 5-meter cable, passive

SFP-H10GB-ACU7M SFP+ 10GBASE-CU 7-meter cable, active

SFP-H10GB-ACU10M SFP+ 10GBASE-CU 10-meter cable, active

JDSU (PLRXPL-SC-S43-22-N) SFP+ SFP+ (Optical)

SFP-10G-SR SFP+ 10GBase-SR (Optical)

Hardware Installation Guide for Cisco UCS E-Series Servers

OL-26447-03

E-Series Servers

Single-Wide E-Series Server and the SM E-Series NCE

The following figure shows the front panel of the single-wide E-Series Server and the SM E-Series NCE.

Figure 1 Front Panel of the Single-Wide E-Series Server and the SM E-Series NCE

1Gigabit Ethernet port 2Management port

3Power switch 4LEDs for HDD1

5Keyboard, Video, Mouse (KVM) port

Note Use the KVM connector that is

shipped with the E-Series Server. See

the next figure.

6Hard disk drive 1

7LEDs for HDD0 8USB

9Hard disk drive 2 10 Reset switch

284518

PWR

HDD1 HDD0

ACT FLT

EN KVW USB

SYS

ACT FLT

RST

GE2

3 4 5 8 106 97

Hardware Installation Guide for Cisco UCS E-Series Servers

OL-26447-03

E-Series Servers

The following figure shows the KVM connector that is shipped with the single-wide E-Series Server.

Figure 2 KVM Connector

1USB connector 2DB15 connector—video port

3DB9 connector—serial port

284862

Hardware Installation Guide for Cisco UCS E-Series Servers

OL-26447-03

E-Series Servers

The following figure shows the internal components of the single-wide E-Series Server.

Figure 3 Single-Wide E-Series Server

1Memory DIMM slots 2HDD

3SD0

Note The SD card in the SD0 card slot

contains the Cisco Integrated

Management Controller (CIMC)

software and must always be present.

4 SD1

284865

Andere Handbücher für UCS E Series

Inhaltsverzeichnis

Andere Cisco Server Handbücher

Cisco

Cisco AS5200 - Universal Access Server Bedienungsanleitung

Cisco

Cisco AS5200-PWR-AC Stücklistenhandbuch

Cisco

Cisco UCS M3 Series Bedienungsanleitung

Cisco

Cisco UCS X210c M6 Handbuch

Cisco

Cisco UCS C24 Montage- und Wartungsanleitung

Cisco

Cisco SNS-3415 series Bedienungsanleitung

Cisco

Cisco Expressway CE1200 Bedienungsanleitung

Cisco

Cisco TelePresence Service-Handbuch

Cisco

Cisco UCS B420 M4 Handbuch

Cisco

Cisco C880 Series Montageanleitung

Cisco

Cisco UCS B Series Installations- und Betriebshandbuch

Cisco

Cisco C880 M4 Bedienungsanleitung

Cisco

Cisco Secure Network Server 3600 Series Handbuch

Cisco

Cisco IE-3000-8TC Bedienungsanleitung

Cisco

Cisco Digital Media System 3.5 Bedienungsanleitung

Cisco

Cisco 2501 - Router - EN Bedienungsanleitung

Cisco

Cisco AS5800 Bedienungsanleitung

Cisco

Cisco AS5300 - Universal Access Server Bedienungsanleitung

Cisco

Cisco UCS X9508 Kurzanleitung

Cisco

Cisco UCS C220 Montage- und Wartungsanleitung

Cisco

Cisco SNS-3400 Series Montageanleitung

Cisco

Cisco Profile Series Bedienungsanleitung

Cisco

Cisco GSS-4492R-K9 Bedienungsanleitung

Cisco

Cisco CRS-16 DC Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung