Cisco UCS Invicta C3124SA Handbuch

Cisco Systems, Inc.

www.cisco.com

Cisco UCS Invicta C3124SA Appliance Upgrade

Procedure Guide, Version 5.0.x

April 22, 2015

This guide describes the process for installing an upgrade for the Cisco UCS Invicta C3124SA

Appliance.

• Audience, page 1

• Upgrade Paths, page 2

• Getting Started, page 2

• Prior to Starting the Upgrade, page 2

• Cisco UCS Invicta C3124SA Appliance Upgrade Process, page 7

Note The figures used in this guide are representational and may differ from the screens you view in the

current release.

Audience

This Upgrade Guide is intended for administrators who are responsible for upgrading the Cisco UCS

Invicta C3214SA Appliance.

Cisco UCS Invicta C3124SA Appliance Upgrade Procedure Guide, Version 5.0.x

Upgrade Paths

Possible upgrade paths are listed here. Each software version in a path must be installed in the sequence

as outlined:

For example, to go from version 5.0.1.1a to 5.0.1.2b:

Starting Point: Version 5.0.1.1a Release 017 > Upgrade to Version 5.0.1.2 Release 066 > then

upgrade to Version 5.0.1.2b Release 013

• Version 5.0.0 Release 29 > Version 5.0.1.1 Release 041 > Version 5.0.1.1a Release 016 > Version

5.0.1.2 Release 066 > Version 5.0.1.2a Release 007 > Version 5.0.1.2b Release 013

• Version 5.0.0 Release 29 > Version 5.0.1.1 Release 041 > Version 5.0.1.1a Release 016 > Version

5.0.1.2 Release 066 > Version 5.0.1.2b Release 013

• Version 5.0.0 Release 29 > Version 5.0.1.1 Release 041 > Version 5.0.1.2 Release 066 > Version

5.0.1.2a Release 007 > Version 5.0.1.2b Release 013

• Version 5.0.0 Release 29 > Version 5.0.1.1 Release 041 > Version 5.0.1.2 Release 066 > Version

5.0.1.2b Release 013

• Version 5.0.1.1a Release 017 > Version 5.0.1.2 Release 066 > Version 5.0.1.2a Release 007 >

Version 5.0.1.2b Release 013

• Version 5.0.1.1a Release 017 > Version 5.0.1.2 Release 066 > Version 5.0.1.2b Release 013

• Version 5.0.1.2 Release 068 > Version 5.0.1.2a Release 007 > Version 5.0.1.2b Release 013

• Version 5.0.1.2 Release 068 > Version 5.0.1.2b Release 013

Getting Started

Clicking System Update on the Cisco UCS Invicta Appliance C3124SA GUI Support Settings window

opens a dialog box that asks the Administrator to choose the system update file (service pack) that was

sent by Cisco, which must be saved locally.

Uploading this file loads the system update onto the Cisco UCS Invicta C3124SA Appliance. After the

file has been authenticated by the system, the Administrator is prompted through the remaining update

process.

Caution You must reboot your system for EACH release upgrade you perform. If you try to upgrade more than

one release at a time without rebooting, your upgrades will not be successful.

Note Be sure to read and acknowledge the Cisco End User License Agreement or the update will not initiate.

Prior to Starting the Upgrade

Prior to starting the upgrade, do the following:

Cisco UCS Invicta C3124SA Appliance Upgrade Procedure Guide, Version 5.0.x

Prior to Starting the Upgrade

• Make sure that the person who is performing the upgrade is logged in as admin.

• I/O to the Cisco UCS Invicta C3124SA Appliance must be quiesced prior to the upgrade installation.

Please refer to your host OS and application vendor's instructions to quiesce I/O.

• Download the upgrade patch file from Cisco.com.

• To monitor the Cisco UCS Invicta C3124SA Appliance after a reboot, ensure that you have CIMC

access.

• Check the SD's health using the Cisco Integrated Management Controller (CIMC) to ensure that

there are no degraded RAID devices (in CIMC, go to Storage Tab > Cisco FlexFlash). If an SD

RAID is degraded, contact TAC.

• Check the storage RAID device health using the Cisco UCS Invicta C3124SA Appliance GUI to

ensure that there are no degraded RAID devices. If the storage RAID is degraded, contact TAC.

• Ensure that there are no scheduled snapshots.

• An Cisco UCS Invicta C3124SA Appliance reboot is required after each upgrade is completed.

• Ensure that all Cisco UCS Invicta C324SA hardware is running CIMC Release version 2.0(3i).

Note HUU 2.0(3i) addresses a memory leak issue where the user was unable to access Cisco IMC using SSH

or HTTP. However, pinging Cisco IMC was successful.

• Download HUU 2.0(3i):

https://software.cisco.com/download/release.html?mdfid=284296254&flowid=31743&softwareid=283

850974&release=2.0%283i%29&relind=AVAILABLE&rellifecycle=&reltype=latest

• User guide for HUU upgrade:

http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/lomug/2-0-x/b_huu_2_0_3/b_huu_

2_0_3_chapter_011.html

Upgrade HUU 1.5(4) to 2.0(3i)

Note NOTE: 2.0(3i) is tested and supported.

Note There may be issues with using various versions of Java.

• The following versions have been tested:

–

Version 7 Update 55 (build 1.7.0_55-b13)

–

Version 7 Update 67 (build 1.7.0_67-b01)

• Set the security level to Medium in the Java Control Panel.

• Clear your browser cache and the Java cache if a problem occurs.

Step 1 Log into CIMC and check the version (Figure 1).

Cisco UCS Invicta C3124SA Appliance Upgrade Procedure Guide, Version 5.0.x

Prior to Starting the Upgrade

Figure 1



Step 2 After logging in, check BIOS version (Figure 2)

Figure 2

Step 3 Click Storage > Health/Status to ensure that the SD RAID is in healthy state. (Figure 3).

Figure 3

Step 4 Launch the KVM Console from Server > Summary > Launch KVM Console (Figure 4)

Figure 4

Cisco UCS Invicta C3124SA Appliance Upgrade Procedure Guide, Version 5.0.x

Prior to Starting the Upgrade

Step 5 Do the following:

• At the KVM console, click the Virtual Media tab and then Add Image (Figure 5).

• Navigate to the ucs-c240-huu-2.03i.iso location.

Figure 5



Step 6 Once mapped, click the KVM tab and then issue a reboot.

Step 7 Press F6 to access boot menu.

Figure 6

Step 8 At boot menu, choose Cisco vKVM-Mapped vDVD1.22 (Figure 7).

Cisco UCS Invicta C3124SA Appliance Upgrade Procedure Guide, Version 5.0.x

Prior to Starting the Upgrade

Figure 7



Step 9 At the Cisco License Agreement, choose “I Agree.”

Step 10 In the Controls section of the main HUU window, choose Update All and answer Yes (3 times) to each

popup window (Figure 8).

Figure 8

Note During the HUU upgrade process, after about 10 minutes, a network connection termination message

appears (Figure 9) because of the CIMC reset. It is best to have a continuous ping to the CIMC IP. At

this point, go back to CIMC and relaunch the KVM Console.

Cisco UCS Invicta C3124SA Appliance Upgrade Procedure Guide, Version 5.0.x

Cisco UCS Invicta C3124SA Appliance Upgrade Process

Figure 9

Note When BIOS is the component to be upgraded, the system will reset at the end of the process. Connection

to the KVM console will be lost. The system will reboot automatically. This takes approximately 10

minutes, It is best to have a continuous ping to the CIMC IP.

When complete, CIMC will reflect the new 2.0(3i) version (Figure 10).

Figure 10

Caution Should you encounter any error or issue during the upgrade process, please contact technical support

before trying to uninstall the update. Attempting to uninstall could potentially cause data integrity and/or

performance issues.

Cisco UCS Invicta C3124SA Appliance Upgrade Process

Step 1 Log into the Cisco UCS Invicta C3124SA Appliance.

Figure 11 Cisco USC Invicta C3124SA Appliance Home Window

Cisco UCS Invicta C3124SA Appliance Upgrade Procedure Guide, Version 5.0.x

Cisco UCS Invicta C3124SA Appliance Upgrade Process

Step 2 Navigate to Array Configuration > Support Settings.

Figure 12 Array Configuration Menu

Step 3 To begin the upgrade process, click System Update.

A dialog box opens that asks the Administrator to choose the system update file (service pack) that was

downloaded from Cisco.com and saved locally.

Figure 13 System Update Button



Cisco UCS Invicta C3124SA Appliance Upgrade Procedure Guide, Version 5.0.x

Cisco UCS Invicta C3124SA Appliance Upgrade Process

Step 4 To locate the patch file that was downloaded prior to starting the upgrade process, click Browse.

Figure 14 Browse Pop-up Box

Step 5 Confirm that the service pack release is correct.

Figure 15 Upload Button

Cisco UCS Invicta C3124SA Appliance Upgrade Procedure Guide, Version 5.0.x

Cisco UCS Invicta C3124SA Appliance Upgrade Process

Step 6 To load the service pack into the Cisco UCS Invicta C3124SA Appliance, click Upload.

An “Uploading (x%)” status indicator appears in the bottom left corner of the GUI’s browser.

Figure 16 Upload Status Indicator

Andere Handbücher für UCS Invicta C3124SA

Inhaltsverzeichnis

Andere Cisco Server Handbücher

Cisco

Cisco B200 M3 Bedienungsanleitung

Cisco

Cisco AS5300-96VOIP-A Bedienungsanleitung

Cisco

Cisco UCS C22 M3 Bedienungsanleitung

Cisco

Cisco APP1000 - One Application Server Appliance Bedienungsanleitung

Cisco

Cisco UCS C210 M2 Systemhandbuch

Cisco

Cisco UCS C240 Bedienungsanleitung

Cisco

Cisco UCS C22 M3 Systemhandbuch

Cisco

Cisco UCS C220 M3 Systemhandbuch

Cisco

Cisco UCS B420 M3 Handbuch

Cisco

Cisco UCS C Series Bedienungsanleitung

Cisco

Cisco Sourcefire Defense Center 750 Bedienungsanleitung

Cisco

Cisco MXE 3500 Handbuch

Cisco

Cisco UCS X9508 Kurzanleitung

Cisco

Cisco UCS B200 M4 Handbuch

Cisco

Cisco UCS C240 M3 Bedienungsanleitung

Cisco

Cisco SFS 7008P Bedienungs- und Wartungsanleitung

Cisco

Cisco UCS 5100 Handbuch

Cisco

Cisco Unity Bedienungsanleitung

Cisco

Cisco UCS E Series Bedienungs- und Sicherheitshinweise

Cisco

Cisco UCS B440-M1 Kurzanleitung

Cisco

Cisco UCS C460 M4 Installations- und Betriebshandbuch

Cisco

Cisco UCS C420 Montage- und Wartungsanleitung

Cisco

Cisco UCS C220 M4 Bedienungsanleitung

Cisco

Cisco CRS-16 DC Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung