Cisco C460 M4 Bedienungsanleitung

Inhaltsverzeichnis

Andere Cisco Server Handbücher

Cisco

Cisco UCS B22 M3 Handbuch

Cisco

Cisco ONS 15454 SONET Bedienungsanleitung

Cisco

Cisco UCS C240 M3 Bedienungsanleitung

Cisco

Cisco SNS-3515 series Bedienungsanleitung

Cisco

Cisco UCS C200 Montage- und Wartungsanleitung

Cisco

Cisco UCS C240 M3 Kurzanleitung

Cisco

Cisco UCS B440 Handbuch

Cisco

Cisco UCS B460 M4 Handbuch

Cisco

Cisco UCS B200 M3 Handbuch

Cisco

Cisco UCS C240 M5 Montage- und Wartungsanleitung

Cisco

Cisco UCS C3160 Montage- und Wartungsanleitung

Cisco

Cisco c240 Montage- und Wartungsanleitung

Cisco

Cisco UCS C480 M5 Montageanleitung

Cisco

Cisco TelePresence Server 7010 Technisches Datenblatt

Cisco

Cisco ONS 15600 Bedienungsanleitung

Cisco

Cisco TelePresence Service-Handbuch

Cisco

Cisco CRS-16 DC Bedienungsanleitung

Cisco

Cisco ONS 15454 SDH Bedienungsanleitung

Cisco

Cisco SE-CL-L3 Bedienungsanleitung

Cisco

Cisco NAC-3300 Series Bedienungsanleitung

Cisco

Cisco UCS B460 M4 Bedienungsanleitung

Cisco

Cisco UCS 5100 Handbuch

Cisco

Cisco Firepower Management Center 750 Bedienungsanleitung

Cisco

Cisco UCS C220 M4 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Contents

Introduction

Problem

Potentially Impacted Systems:

Customer Visibility / Impact:

Solution

Work Around Options:

Work Around 1 - Reset the IMC to Factory Default Settings

Work Around 2 - Resetting to Factory Defaults via IMC CLI

Introduction

The intent of this document is to address the issue seen regarding Trusted Platform Module (TPM)

related System Event Logs (SEL) events on some C460 M4 servers. A small number of C460 M4

SPARE servers will see a critical SEL event related to TPM presence right out of the factory. The

instructions below will assist you in resolving servers impacted by this issue.

Problem

Potentially Impacted Systems:

About 614 SPARE C460 M4 Systems (Shipped between June 2nd 2014, and April 13th 2016.)

Customer Visibility / Impact:

Customers may see a critical SEL event similar to the one below on servers received from the

factory.

There is NO operational impact to the server, but the message may lead to unessary concern

resulting in a call to TAC. This has to do with the way TPMs were handeled in manufacturing.

C460 M4 systems keep a "Cached" value for TPM presence, indicating if a TPM was was ever

installed in the server - every server has a TPM installed durring testing. The C460 M4 also tracks

the current precense of the TPM, and since all servers ordered as spares ship without a TPM, the

system triggers an alarm thinking that the module that was once installed has been removed.

Solution

The work-arround below will allow you to quickly address this SEL event should you wish to

remove the messages. The work-arround involves resetting the Integrated Management Controller

(IMC) to factory default settings, clearing any cached TPM Presence value.

Work Around Options:

Work Around 1 - Reset the IMC to Factory Default Settings

Resting to Factory Defaults via IMC WebUI

Point a browser to the IMC IP, login, and navigate to the Admin --> Utilities tab1. Click the "Reset Cisco IMC to Factory Default Configuration" as shown in the image below.2.

3. You will be prompted with a pop up box. Click OK to proceed.

Note: The IMC will reset completely and you will need to reconfigure all settings. Please record

any information prior to the reset.

Work Around 2 - Resetting to Factory Defaults via IMC CLI

SSH to the IMC IP using the user's credentials.1. Type the following commands as shown below:2.

a. scope cimc

b. factory-default

3. Enter "y" to continue.

Note: The IMC will reset completely and you will need to reconfigure all settings.

Please record any information prior to the reset.