Clarion UNGO CS105 Bedienungsanleitung

owners_105OEM.qxd 9/14/99 5:21 PM Page 1

Table of Contents

1. About Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1

2. Remote Transmitters

Remote Transmitter Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 1

Convenience Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 1

Standard Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 1

Driver Door Priority Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 2

Multi-Car Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 3

Adding a New Transmitter into the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 3

Deleting Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 3

Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 4

Additional Remote Transmitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 4

3. Basic Operation

Remote Locking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5

Remote Unlocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5

Silent Locking / Disarming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5

Panic Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 5

Emergency Override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 6

4. Other Features

Ignition Controlled Door Locking / Unlocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 7

Auxiliary Function Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 7

Remote Car Starter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 7

Garage Door Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 7

5. Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 8

6. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 9

Note: Certain features described in this manual may require additional parts and/or labor. Also, some features of

this convenience system have selectable options that must be activated or programmed during the system’s

installation. These items will be identified in the following sections. Your Dealer will be happy to discuss

these features with you and help you design your system to meet your needs.

owners_105OEM.qxd 9/14/99 5:21 PM Page 2

This System comes with:

• Main Unit - The “brain” of the system.

• 2 - Two Button Remote Transmitters

•Status LED - Red illuminated indicator that provides system status information.

• Emergency Override Switch - used to override the system in case the Remote

Transmitters become lost or stolen.

Optional Features

The advanced design of the system incorporates a number of optional inputs and outputs

allowing you to create a customized convenience system by easily accommodating many

optional features such as:

Remote Transmitter Layout

The system comes with 2 Remote Transmitters used to control nearly all of the system’s

features.

Each time a transmitter button is pressed, the LED will flash to indicate that a transmission is

taking place.

These Remote Transmitters may be used in one of three operating modes:

Convenience Mode,

Standard Mode,

and

Driver Door Priority Mode

Convenience Mode (default)

The system is pre-programmed to operate in the Convenience Mode which allows provides

separate Lock and Unlock buttons for greater convenience and ease of use.

Button 1 Locks the system and activates the optional Starter Defeat.

Button 2 Unlocks the system and deactivates the optional Starter Defeat. Pressing Button 2 again

activates the system’s Auxiliary Function.

If the system is Locked, pressing Button 2 will Unlock the system.

If the system is Unlocked, pressing Button 2 will activate the Auxiliary Function.

Remote Transmitters

About Your Convenience System

Owner’sManual - Page 1

❐Starter Disable

❐ Remote Window Control

❐Remote Car Start

❐ Extended Range Antenna

❐Power Trunk / Hatch Release

❐Garage Door Receiver

Button 1

Button 2

LED

owners_105OEM.qxd 9/14/99 5:21 PM Page 1

This diagram illustrates how the Remote Transmitter is used in the Convenience Mode:

Standard Mode

This configuration allows the use of separate buttons for control of the door locking system and

the Auxiliary function.

Button 1 Locks and Unlocks the system and controls the optional Starter Defeat.

Button 2 controls the system’s Auxiliary Function.

This diagram illustrates how the Remote Transmitter is used in the Standard Mode:

Driver Door Priority Mode*

This configuration adds the security of unlocking only the driver’s door when the system is

Unlocked. Pressing the Unlock button again will unlock all remaining doors.

Button 1 Locks the system.

Button 2 Unlocks the system and at the same time activates Auxiliary Function 1 (which unlocks

the driver’s door).

If the system is Locked, pressing Button 2 will Unlock the driver’s door only.

If the system is Unlocked, pressing Button 2 again within 15 seconds will unlock all remaining doors.

This diagram illustrates how the Remote Transmitter is used in the Driver Door Priority Mode:

*Extra parts and/or labor may be required to properly utilize this mode. See your Dealer for details.

Unlock All

LOCK

UNLOCK*

BUTTON 1

BUTTON 2

*Unlocking the system will unlock only the Driver's Door

LOCK/UNLOCK

AUX

BUTTON 1

BUTTON 2

AUX

LOCK

UNLOCK

BUTTON 1

BUTTON 2

Page2 - Owner’sManual

owners_105OEM.qxd 9/14/99 5:21 PM Page 2

Multi-Car Operation

If you want to control multiple systems by a single Remote Transmitter, an optional 3-Button

Remote Transmitter is available. The 3-Button Remote Transmitter gives you the convenience

of operating several vehicles from a single Remote Transmitter.

For more information about Multi-Car operation, see your Dealer.

Adding a New Transmitter into the System

The system has the ability to recognize up to 20 individual remote transmitters. If the vehicle is

used by multiple drivers, each can have their own Remote Transmitter.

To add a Remote Transmitter:

1. Turn on the ignition.

2. Press and hold the Override switch.

•The status LED will turn on red.

3. Within 5 seconds:

Continue holding the Override switch

and Press Transmitter Button 1 for remote

locking

with

chirp confirmation.

--- or ---

Release the Override switch

and Press Transmitter Button 1 for remote locking

without

chirp confirmation.

•The status LED will flash once quickly to confirm that the new Remote Transmitter

has been added.

4. Turn off the ignition.

Deleting Transmitters (Adding a Remote Transmitter

and

Erasing All

Other Remote Transmitters From the System)

1. Turn on the ignition.

2. Press and hold the Override switch.

•The status LED will turn on red.

Continue to hold the Override switch.

•After 5 seconds, the status LED will flash 4 times, then turn on red again.

3. Within 5 seconds:

Continue holding the Override switch

and Press Transmitter Button 1 for remote

locking

with

chirp confirmation.

--- or ---

Release the Override switch

and Press Transmitter Button 1 for remote locking

without

chirp confirmation.

•The status LED will flash once quickly to confirm that the new Remote Transmitter

has been added.

4. Turn off the ignition.

Owner’sManual - Page 3

owners_105OEM.qxd 9/14/99 5:21 PM Page 3

Battery Replacement

Your Remote Transmitter uses a 12 volt alkaline battery, which will need to be replaced from time

to time. Under normal conditions, the battery should last for up to a year before it needs

replacement.

When your Remote Transmitter’s battery is in need of replacement, you will notice a decrease in

your system’s operating range or a decrease in the brightness of the Transmitter’s LED indicator.

To change the battery, remove the 2 screws at the back of the Transmitter and carefully separate

the top and bottom halves of the Transmitter case.

Insert the new battery, making sure that the positive and negative terminals are positioned

correctly and replace the cover.

Additional Remote Transmitters

Additional Remote Transmitters for your system are available from your dealer.

Page4 - Owner’sManual

Battery Type: 23A

owners_105OEM.qxd 9/14/99 5:21 PM Page 4

Owner’sManual - Page 5

Remote Locking

To Lock the System:

1. Turn off the ignition.

2. Press Button 1.

•The siren will chirp once.

•The doors will lock.

•The parking lights will flash once.

•The LED will begin blinking, indicating the optional Starter Defeat is activated*.

*If installed.

Remote Unlocking

To Unlock the System:

Press Button 2*.

•The siren will chirp twice.

•The doors will unlock.

•The parking lights will flash twice.

•The LED will turn off, indicating the optional Starter Defeat is deactivated**.

* When the transmitter operation is set for Standard Mode, press Button 1 to Unlock.

**If installed.

Silent Locking / Unlocking

Each Remote Transmitters can be individually set to Lock and Unlock the system with or without

chirp confirmation at the time they are programmed into the system (see Adding a New

Transmitter into the System).

To temporarily cancel the Locking and Unlocking confirmation chirps, you can Lock or Unlock the

system by pressing Buttons 1 and 2

together

If the system was programmed to lock the system

without

chirp, pressing Buttons 1 and 2 together will lock the

system

with

chirp.

Panic Mode

Allows you to instantly trigger the alarm in an emergency situation by the Remote Transmitter.

To enter Panic Mode:

1. Press and hold Button 1 for 2 seconds.

•The system will trigger.

2. Press Button 2 to stop Panic Mode.*

If Panic Mode is not stopped by the Remote, it will automatically time out after 40 seconds, and

the system will return to its prior Locked/Unlocked state.

* When the transmitter operation is set for Standard Mode, press Button 1 to stop Panic Mode.

Basic Features

owners_105OEM.qxd 9/14/99 5:21 PM Page 5

Page6 - Owner’sManual

Emergency Override

In case your Remote Transmitter becomes inoperable, or it is lost or stolen, you can still enter

and drive your car by using the following procedure. Be sure that you have your ignition keys

ready and that you know the location of the override switch before you perform this procedure.

To override the system:

1. Unlock the door using the key.

2. Enter the vehicle.

•Because the system is locked, the Starter Defeat will be activated*.

3. Turn ignition key on.

4. Press and hold the override switch.

5. The optional horn/siren will chirp twice indicating the Starter Defeat is deactivated*.

6. You can now start and drive the car.

*If installed.

owners_105OEM.qxd 9/14/99 5:21 PM Page 6

Owner’sManual - Page 7

Ignition Controlled Door Locking

For added convenience and safety, this feature automatically locks your car’s doors 10 seconds

after the ignition key is turned on.

To prevent you from accidentally locking your keys inside the car:

• The system will not automatically lock the doors if a door is open when the ignition key is turned on.

• The system will not automatically lock the doors if a door is opened during the first 10 seconds after the

ignition key is turned on.

Ignition Controlled Door Unlocking*

For added convenience, this feature automatically unlocks your car’s doors after the ignition key

is turned off.

*For personal safety reasons, this feature can be turned off by your installer.

Dome Light Control

For increased safety and convenience this optional feature can be set, during the installation, to

automatically turn on the dome light for 15 seconds when you Unlock the system and when you

turn off the ignition.

Illuminated Entry. The dome light will turn on for 15 seconds when the system is disarmed (or

unlocked in Valet Mode) using the Remote Transmitter.

Illuminated Exit*. If the ignition key has been on for at least 10 seconds, the dome light will turn

on for 15 seconds when you turn off the ignition.

*This feature may be turned off by your installer if desired.

Auxiliary Function Output - momentary / latched / timed

The Auxiliary Function has three selectable operating modes which can be programmed by your

installer to remotely control an optional feature such as, electric trunk release, remote car starter,

power windows, power sunroof, etc.

Momentary - the system will provide an output for as long as the Transmitter button is held.

Latched - the system will provide an output that turns on when the transmitter button is pressed and turns off when the

transmitter button is pressed again.

Note: The Latched mode works great for activating auxiliary lighting such as neon or off road lights. It can also be used

to activate your stereo system so that it be turned on without having the key in the ignition. In either case the auxiliary

function will turn off when the system is armed or disarmed so that you do not forget to turn it off and drain your vehicle’s

battery.

Timed - the system will provide an output that turns on for 30 seconds each time the transmitter button is pressed. If the

button is pressed again during the 30 seconds, the output will turn off.

Note: The Timed mode is especially useful to turn on the vehicle’s head lights to light the path to your door at night.

To operate the Auxiliary Function, press Button 2.

When the Latched or Timed outputs are activated:

•Locking the system will turn off the Aux. 2 output if it was turned on while the system was

unlocked.

•Unlocking the system will turn off the Aux. 2 output if it was turned on while the system

was locked.

Other Features

owners_105OEM.qxd 9/14/99 5:21 PM Page 7

Comfort Closure

Many late model European vehicles have a feature that closes the windows when the door key

is turned to the lock position and held. If your vehicle is equipped with this feature, the Ungo

system can be tied into the system to automatically roll up the windows when the system is

armed.

Remote Car Starter

When an optional Remote Car Starter is installed into your car, the Remote Transmitter can be

used to remotely start and run your vehicle to warm-up the engine, as well as activate the heating

/ air conditioning system.

Garage Door Receiver

When an optional Garage Door Receiver (model number SAA5999) is used with your system,

the Remote Transmitters can be set to control almost any automatic garage door opener.

By adding this feature to your system, you not only add the convenience of being able to open

your garage door and activate your convenience system by the same remote, but you also add

the protection of anti-code grabbing technology to your automatic garage door opener.

As an added benefit, by not keeping a garage door opener in your car, your garage is protected

from break-in by a thief who might break into your car to steal your garage door opener.

Page8 - Owner’sManual

owners_105OEM.qxd 9/14/99 5:21 PM Page 8

Inhaltsverzeichnis

Andere Clarion Autoalarmanlage Handbücher

Clarion

Clarion Ungo MS1001 Bedienungsanleitung

Clarion

Clarion S400 Bedienungsanleitung

Clarion

Clarion UNGO ProSecurity S100 Bedienungsanleitung

Clarion

Clarion UNGO MS5500 Handbuch

Clarion

Clarion Ungo Pro Security SR1000 Bedienungsanleitung

Clarion

Clarion Ungo Pro Security SR1000 Bedienungsanleitung

Clarion

Clarion UNGO Pro Security S670 Bedienungsanleitung

Clarion

Clarion Ungo MS2004 Bedienungsanleitung

Clarion

Clarion UNGO MS2007 Bedienungsanleitung

Clarion

Clarion Ungo MS2004 Bedienungsanleitung

Clarion

Clarion UNGO MS2106 Bedienungsanleitung

Clarion

Clarion UNGO KE106 Bedienungsanleitung

Clarion

Clarion UNGO ProSecurity S100 Bedienungsanleitung

Clarion

Clarion UNGO PRO SECURITY K20 Bedienungsanleitung

Clarion

Clarion UNGO ProSecurity S660 Bedienungsanleitung

Clarion

Clarion UNGO ProSecurity S660 Bedienungsanleitung

Clarion

Clarion UNGO MS2100 Bedienungsanleitung

Clarion

Clarion UNGO MS3001 Bedienungsanleitung

Clarion

Clarion UNGO MS2005 Bedienungsanleitung

Clarion

Clarion UNGO MS5500 Bedienungsanleitung

Clarion

Clarion UNGO ProSecurity SR6000 Bedienungsanleitung

Clarion

Clarion Ungo Pro Security SR9000 Bedienungsanleitung

Clarion

Clarion UNGO ProSecurity SR5000 Bedienungsanleitung

Clarion

Clarion Ungo MS2000 Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Clifford

Clifford 3606X Bedienungsanleitung

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

Clifford

Clifford Sabre II Bedienungsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Clifford

Clifford CYBER 2 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung

Clifford

Clifford Nova 3 Bedienungsanleitung

Viper

Viper 560XV Bedienungsanleitung