Clarke CAM14HV Bedienungsanleitung

OPERATION & MAINTENANCE

INSTRUCTIONS

ORIGINAL INSTRUCTIONS GC0620 - ISS 1

14” HIGH VELOCITY DRUM FAN

MODEL NO: CAM14HV

PART NO: 3230235

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Drum Fan which is designed for indoor

use. Read this manual carefully, in doing so you guarantee the safety of

yourself and that of others around you, and you can look forward to your

purchase giving you long and satisfactory service.

SPECIFICATIONS

Model CAM14HV

Product dimensions 530 x 220 x 520 mm

Drum diameter 480 mm

Fan diameter 395 mm

Swivel/tilt range 360o

Product weight 6.5 kg

Operating temperature 10 - 40oC

Power supply 230V/50Hz

Duty cycle classification: S1 (continuous)

Ingress protection class IPX0

Electrical insulation class I

Rated speed settings 1 - 1100 rpm

2 - 1200 rpm

3- 1260 rpm

Rated fan flow rate: (m3/h) 66.2 m3/m

Fan power input 107.9 W

Service value 0.6 m3/m/W

Standby power consumption 0

Seasonal electricity consumption 34.5 kWh/a

Guaranteed sound power level 71 dB

Maximum air velocity 4.9 m/s

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ENVIRONMENTAL RECYCLING POLICY

By purchasing this product, the customer is taking on the obligation

to deal with its safe disposal in accordance with the Waste Electrical

and Electronic Equipment regulations (WEEE).

In effect, this means that this product must not be discarded with

general household waste but according to the laws governing Waste

Electrical and Electronic Equipment (WEEE) at a recognized disposal facility.

If disposing of this product or any damaged components, do not dispose of

with general waste. This product contains valuable raw materials. Metal

products should be taken to your local civic amenity site for recycling of metal

products.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused,

tampered with, or not used for the purpose for which it was intended. Faulty

goods must be returned to their place of purchase, no product can be

returned to us without prior permission.

This guarantee does not effect your statutory rights.

SAFETY RULES

Make sure that you read, understand and comply with the following rules.

POSITIONING

1. This fan is designed for indoor use only.

2. Be aware that the suction capability is considerable. DO NOT position the

fan where it will blow dust, chippings or hazardous fumes at people.

3. DO NOT place the fan close to any wet surface. DO NOT place against

any surface such as a wall, door or furniture etc.

4. DO NOT place the fan on a raised surface or anywhere it could topple

over.

5. Only use in a level position.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

6. Take care that the intake grille cannot be blocked by curtains or other

fabrics. DO NOT allow loose clothing, long hair etc. to be drawn to the

intake side of the fan and ensure the outlet is clear.

7. DO NOT operate the fan in explosive atmospheres such as in the presence

of flammable liquids, gases or dust such as in a paint spray booth. Electric

motors create sparks which may ignite dust or fumes.

8. DO NOT get the fan wet or use in areas of high condensation.

9. DO NOT operate without the safety grills secured in position.

10. DO NOT leave the fan running unattended over night.

PERSONNEL SAFETY

1. DO NOT use the fan when you are tired or under the influence of alcohol,

drugs or intoxicating medication.

2. DO NOT stand on the fan.

3. DO NOT use with wet hands or when there is water on the power cable.

4. Young children must be kept away unless continuously supervised.

ELECTRICAL SAFETY

1. Inspect the power cable/plug for damage/looseness. DO NOT use the fan

if the power cable is damaged.

2. Make sure that the voltage on the product label is the same as the voltage

of the power supply. If in doubt, consult a qualified electrician.

3. DO NOT abuse the electrical cable. Do not use the cable for pulling or

unplugging the fan.

4. Keep the cable away from sources of heat, oil, sharp edges or moving

parts. Damaged or tangled cables increase the risk of electric shock.

5. DO NOT use extension cables with this fan.

SERVICE & REPAIRS

1. Check that the fan is in good working order. Take immediate action to

have it repaired or any damaged parts replaced.

2. DO NOT attempt to repair the fan yourself. Always contact the CLARKE

service department who will use recommended parts only. Unapproved

parts may be dangerous and will invalidate your warranty.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ELECTRICAL CONNECTIONS

Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply

through an approved BS 1363 plug or a suitably fused isolator switch.

If the plug has to be changed because it is not suitable for your socket, or

because of damage, it must be removed and a replacement fitted, following

the wiring instructions shown below. The old plug must be discarded safely, as

insertion into a power socket could cause an electrical hazard.

If the colours of the wires in the power cable do not agree with the markings

on the plug.

• Connect the BLUE wire

to the terminal

marked N.

• Connect the BROWN

wire to the terminal

marked L.

• Connect the YELLOW

AND GREEN wire to

the terminal marked E

or .

AN APPROVED RESIDUAL CURRENT DEVICE (RCD) WHICH HAS A TRIPPING

CURRENT OF LESS THAN 30 mA MUST BE USED.

If you are not sure, consult a qualified electrician. DO NOT try to do any repairs

yourself.

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS

THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS

SUPPLY.

WARNING: THE WIRES IN THE POWER CABLE OF THIS PRODUCT ARE

COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

BLUE = NEUTRAL BROWN = LIVE YELLOW AND GREEN = EARTH

Plug must be BS1363/A approved.

Always fit

Ensure that the outer sheath of

Neutral

(Blue)

Live

(Brown)

Earth

(Green and

a 13 Amp

the cable is firmly held by the clamp

fuse.

Yellow)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

BEFORE USE

Before assembly, check for damage and or shortages etc, any damage or

shortage should be reported to your CLARKE dealer where the fan was

purchased.

Your fan should be supplied with the

following parts:

• 1 x frame

• 2 x rubber spacers

• 2 x locking knobs

Join the frame to the fan assembly

using the locking knobs and rubber

spaces as shown.

OPERATION

1. Place on a flat surface and at a safe distance from flammable materials.

2. Connect the fan to a suitable power outlet.

• The fan is operated by the ON/OFF switch.

3. Select your speed setting as

follows:

•0-Off

• 1 - 1100 rpm,

• 2 - 1200 rpm,

• 3 - 1260 rpm.

4. Set the desired angle of tilt and

tighten the locking knobs.

CARE & MAINTENANCE

1. Clean with a soft damp cloth. Do not use solvents or abrasives.

WARNING: ALWAYS DISCONNECT FROM THE POWER SUPPLY BEFORE

PERFORMING ANY CLEANING OR MAINTENANCE TASKS. REPAIRS

SHOULD BE CARRIED OUT BY THE CLARKE SERVICE DEPARTMENT.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

2. Clean the guards by vacuuming or wiping. If excess dust is found on the

blades/interior, the end guard can be removed to gain access by

removing the four securing screws.

REPLACE GUARDS BEFORE RE-CONNECTING TO MAINS SUPPLY.

No other maintenance is required. Should you discover any problem with the

fan return it to the CLARKE service department for repair.

Should the fan fail to operate, check the power supply and that the fuse in the

plug has not blown. Abnormal noise while the fan is running could occur if the

fan is not standing on a level surface.

DECLARATION OF CONFORMITY

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarke Lüfter Handbücher

Clarke

Clarke CAM200B Bedienungsanleitung

Clarke

Clarke CPF18B Bedienungsanleitung

Clarke

Clarke CAM6000 Installations- und Betriebshandbuch

Clarke

Clarke CAM400 Bedienungsanleitung

Clarke

Clarke CAM30B Bedienungsanleitung

Clarke

Clarke CBF18 Bedienungsanleitung

Clarke

Clarke CDF20HV-B Installations- und Betriebshandbuch

Clarke

Clarke CAM24C Bedienungsanleitung

Clarke

Clarke CPF18B100 Bedienungsanleitung

Clarke

Clarke Air CAM5002 Bedienungsanleitung

Clarke

Clarke air CHV18WF Bedienungsanleitung

Clarke

Clarke Air CBF20 Bedienungsanleitung

Clarke

Clarke CAM24R Bedienungsanleitung

Clarke

Clarke air movers Handbuch

Clarke

Clarke CAM5002 Installations- und Betriebshandbuch

Clarke

Clarke Air CDF18HV-B Installations- und Betriebshandbuch

Clarke

Clarke Air Series Bedienungsanleitung

Clarke

Clarke Contractor CON305 Bedienungsanleitung

Clarke

Clarke CAM20R Bedienungsanleitung

Clarke

Clarke CAM24B Bedienungsanleitung

Clarke

Clarke CAM110 Bedienungsanleitung

Clarke

Clarke CFF18B Bedienungsanleitung

Clarke

Clarke CONTRACTOR CON500 Bedienungsanleitung

Clarke

Clarke CAM36C Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung