3
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
INSTALLING YOUR BIKE
Specialised training tyres are not required to use this bike trainer, but they are
recommended if you intend to use the bike trainer for prolonged periods of time.
1. Fully extend trainer legs and set the
trainer on a flat level surface.
2. The trainer is designed for use with the
supplied skewer.
• You must replace your rear skewer
with the one supplied.
• This ensures ideal clamping and
stability on the trainer.
• Make sure the wheel is securely
clamped to the bike using the
supplied skewer.
3. Rotate both locking wing nuts so that
they are positioned next to the
couplings.
4. Rotate the adjustment wing nuts to
create a wide clearance between
the couplings.
5. Hold the bike by the saddle and hold
the rear wheel between the two
couplings
6. Rotate the adjustment wing nuts to
position the couplings over the ends of
the skewer.
• The wheel should be in the centre of the bike trainer.
7. Adjust the locking wing nuts to lock the couplings in place.
