Clarke CHT399 Bedienungsanleitung

OPERATION & MAINTENANCE

INSTRUCTIONS

1102

MODEL NO: CHT399

PART No: 1801399

SUPPORT ARM

Please note that the details and specifications contained herein are correct at the time of

going to print. However CLARKE International reserve the right to change specifications at any

time without prior notice. Always consult the product data plate.

SPECIFICATIONS

Model :.................................................................................. CHT399

Part No : ............................................................................... 1801399

Adjustable Range : ............................................. 1.15 to 2.9 metres

Maximum Capacity : ............................................................... 25kg

TUV/GS approved.

Please read these instructions carefully before operating the tool

Thank you for purchasing this CLARKE Support Arm.

Before using the device, please read this manual thoroughly and carefully

follow all instructions given. This is for your own safety and that of others around

you, and is also to help you achieve long and trouble free service from your

new tool.

Ideal ‘third arm’ for installing plasterboard, suspended ceiling panels, kitchen

cupboards or similar operations.

takes the strain out of overhead work. Quick and easy to erect.

CLARKE GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of

12 months from the date of purchase. Please keep your receipt as proof of

purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not affect your statutory rights.

WARNING

DO NOT USE THE SUPPORT TO LIFT LOADS, Failure to observe this instruction

would invalidate your guarantee and may cause damage to your support,

and could even result in personal injury, and even damage to property.

-2-

Safety Precautions

IMPORTANT

Failure to follow these precautions could result in personal injury, and/or

damage to property.

1. ALWAYS seek help with large items such as plasterboard etc.

2. ALWAYS wear a safety helmet, shoes gloves and goggles, manufactured to the latest

European Safety Standards.

3. ALWAYS keep work area clean. Cluttered areas invite accidents.

4. ALWAYS keep children away. All visitors should be kept a safe distance from the work

area.

5. ALWAYS concentrate on the job in hand, no matter how trivial it may seem. Be aware

that accidents are caused by carelessness due to familiarity.

6. ALWAYS keep your proper footing and balance at all times - don’t overreach. For

best footing, wear rubber soled footwear. keep floor clear of oil, scrap wood, etc.

7. ALWAYS wear proper apparel. loose clothing or jewellery may get caught in moving

parts. wear protective hair covering to contain long hair.

8. ALWAYS Check tool is in perfect working order before using.

9. NEVER use the tool if it becomes damaged, i.e.; bent etc.

10. NEVER use where a risk exceeding the rated capacity exists.

Special Safety Precautions When Using Your Support Arm

1. ALWAYS ensure floor is firm and reasonably level.

2. ALWAYS check load to be supported does not exceed maximum capacity, (25kg).

3. ALWAYS ensure when adjusting support arm length, a minimum of 2½”(64mm) of top

tube remains in bottom tube, NEVER less.

4. ALWAYS ensure the support arm is as near vertical as possible, DO NOT use at an

angle.

5. ALWAYS check load is supported safely before starting work.

5. NEVER use support arm to lift weight, it is designed to support weight only.

If in any doubt, contact Clarke’s service department on 020 8988 7400

-3-

Directions For Use

1. Ensure floor is firm and reasonably level

before starting, if not, use boards to obtain

it, once satisfied continue as follows.

2. Seek assistance to lift plasterboard etc into

position.

3. Set arm/arms to the approximate height

as follows.

a) Lift lever ‘A’ whilst pushing down the top

support plate.

b) Loosen knob ‘B’, withdraw upper support

tube from lower support tube, by holding

lower tube and pulling upper tube upwards, until the desired height is reached, firmly

tighten Knob ‘B’. (hand tight only), With the upper and lower support tubes fully

extended, (see special safety precautions on page 3), more height is required,

continue with C.

c) Lift lever ‘A’ and pull the top support plate upwards, again until required height is

reached, release lever, the support is now ready to use.

4. Place support arm/arms in a position where they can be easily reached once object

to be supported is in position.

5. Carefully lift object to be supported into position, place supports underneath and

slowly pump trigger until support is firmly in place.

6. Check supports are vertical, if not, correct before continuing.

7. When finished securing plasterboard etc, permanently into position, remove by, either

lifting Lever ‘A’, or loosening Knob ‘B’, and pushing support upwards against ceiling

etc.

Tools and Accessories

A wide range of tools and accessories are available from your nearest CLARKE dealer, for

further information, contact your nearest dealer, or telephone CLARKE International Sales

department on 01992 565300.

-4-

PARTS & SERVICE TEL: 020 8988 7400

or e-mail as follows:

PARTS: [email protected]

SERVICE: [email protected]

Item Part Number Description Qty

1 JB39901 Plate 2

1a JB39901A Pad 2

1b JB39901B Ball 1

2 JB39902 Shaft 1

3 JB39903 Lamp Bracket 1

4 JB39904 Lever ‘A’ 1

5 JB39905 Upper Support Tube 1

6 JB39906 Knob ‘B’ 1

6a JB39906A Bolt 1

7 JB39907 Lower Support Tube 1

8 JB39908 Spring 1

9 JB39909 Trigger Assy 1

10 JB39910 Spring 1

11 JB39911 Clamp 1

12 JB39912 Ball Joint/Base 1

PARTS LIST

-5-

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarke Rack & Stand Handbücher

Clarke

Clarke CES680F Betriebsanleitung

Clarke

Clarke CWR45B Programmierhandbuch

Clarke

Clarke CWR45 Programmierhandbuch

Clarke

Clarke CMSS Bedienungsanleitung

Clarke

Clarke CWMWR1 Bedienungsanleitung

Clarke

Clarke CMSSR Bedienungsanleitung

Clarke

Clarke Strong-Arm CES680 Betriebsanleitung

Clarke

Clarke CT100PR Bedienungsanleitung

Clarke

Clarke Strong-Arm CES450 Bedienungsanleitung

Clarke

Clarke CAX6TBC Bedienungsanleitung

Clarke

Clarke CWC80B Bedienungsanleitung

Clarke

Clarke CBS3 Bedienungsanleitung

Clarke

Clarke CSM5175 Series Bedienungsanleitung

Clarke

Clarke CAX3TBC Bedienungsanleitung

Clarke

Clarke CWR1 Bedienungsanleitung

Clarke

Clarke Strong-Arm CES340 Bedienungsanleitung

Clarke

Clarke MDS1 Bedienungsanleitung

Clarke

Clarke CSM4200 Bedienungsanleitung

Clarke

Clarke CMS1 Bedienungsanleitung

Clarke

Clarke CES560 Bedienungsanleitung

Clarke

Clarke CAX3TAB Bedienungsanleitung

Clarke

Clarke CGR1 Bedienungsanleitung

Clarke

Clarke CAX20S Bedienungsanleitung

Clarke

Clarke CSR4550BO Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung