Clarke CMSSR Bedienungsanleitung

ASSEMBLY INSTRUCTIONS

LS0718 - ISS 2

ORIGINAL INSTRUCTIONS

MITRE SAW STAND WITH ROLLERS

MODEL NO: CMSSR

PART NO: 6500975

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for selecting this Clarke mitre saw stand with rollers.

Read this manual before use, the warnings and cautions in this manual will

help you use the mitre saw stand safely.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

SAFETY PRECAUTIONS

1. This mitre saw stand has a maximum load capacity of 15O kg which must

not be exceeded.

2. Do not stand on top of the mitre saw stand.

3. Take care when placing a load on to the mitre saw stand, it should be

placed gently so that the strain is taken up gradually. Do not drop a load

carelessly.

4. Always check the mitre saw stand for damage before use.

5. Always ensure you are working on a firm flat stable surface.

SPECIFICATIONS

Maximum Dimensions 1710 (fully extended) x 460 x 595-820 mm

Maximum Load 150 kg

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY

1. Screw the handle onto the table

using the screws provided.

2. Slide in the extension arms and

secure from below using the knob

supplied.

3. Insert the rollers into the extension

arms and secure in place using

the knob supplied.

OPENING/CLOSING THE MITRE SAW STAND

1. Push the locking pin in as you

swing the leg into position.

2. The leg should lock into place.

3. Test the stability of the table

before use.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ADJUSTING THE MITRE SAW STAND

ADJUSTING THE LEG HEIGHT

1. Press the locking pin shown and

pull the leg to the desired height.

• The locking pin must lock into

one of the holes on the leg.

• Make sure that the same hole is

used on each leg.

2. Repeat steps 1 to 3 with the

remaining legs.

3. Test the stability of the table before use.

ADJUSTING THE ROLLER LENGTH

1. Loosen the knob shown.

2. Slide the extension arm to the

required position.

3. Tighten the knob to lock in place.

ADJUSTING THE ROLLER HEIGHT

1. Loosen the knob shown.

2. Adjust the roller to the required

height.

3. Tighten the knob to lock in place.

ATTACHING THE MITRE SAW

1. Place the mitre saw in the middle of the table and secure to the table

using the fixings supplied.

Inhaltsverzeichnis

Andere Clarke Rack & Stand Handbücher

Clarke

Clarke CWR1 Bedienungsanleitung

Clarke

Clarke LB7S Bedienungsanleitung

Clarke

Clarke CES680F Betriebsanleitung

Clarke

Clarke Strong-Arm CES680 Betriebsanleitung

Clarke

Clarke CMSS Bedienungsanleitung

Clarke

Clarke CMS1 Bedienungsanleitung

Clarke

Clarke CAX20S Bedienungsanleitung

Clarke

Clarke CTS4000B Bedienungsanleitung

Clarke

Clarke Strong-Arm CES450 Bedienungsanleitung

Clarke

Clarke MDS1 Bedienungsanleitung

Clarke

Clarke CAX3TBC Bedienungsanleitung

Clarke

Clarke CAX6TBC Bedienungsanleitung

Clarke

Clarke CT100PR Bedienungsanleitung

Clarke

Clarke CHT399 Bedienungsanleitung

Clarke

Clarke CUTS1 Bedienungsanleitung

Clarke

Clarke Strong-Arm CES340 Bedienungsanleitung

Clarke

Clarke CBS3 Bedienungsanleitung

Clarke

Clarke LB5S Bedienungsanleitung

Clarke

Clarke CES560 Bedienungsanleitung

Clarke

Clarke CSM5175 Series Bedienungsanleitung

Clarke

Clarke CWMWR1 Bedienungsanleitung

Clarke

Clarke CGR1 Bedienungsanleitung

Clarke

Clarke CDS3 Bedienungsanleitung

Clarke

Clarke MCD1 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung