Clarke HSE Series Installations- und Betriebshandbuch

OPERATING & MAINTENANCE

INSTRUCTIONS

HSE RANGE

GC0514

SUBMERSIBLE PUMPS

INTRODUCTION

Thank you for purchasing this CLARKE submersible pump.

Before attempting to use the pump, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of

yourself and that of others around you, and you can look forward to the

submersible pump giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not affect your statutory rights.

ENVIRONMENTAL PROTECTION & RECYCLING

Do not dispose of this product with general household waste. It must

be disposed of according to the laws governing Waste Electrical and

Electronic Equipment, at a recognised disposal facility. Any old tools,

accessories and packaging should be sorted and disposed of in an

environmentally appropriate manner.

Through purchase of this product, the customer is taking on the obligation to

deal with the WEEE in accordance with the WEEE regulations in relation to the

treatment, recycling & recovery and environmentally sound disposal of the

WEEE.

In effect, this means that this product must not be disposed of with general

household waste. It must be disposed of according to the laws governing

Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal

facility.

TABLE OF CONTENTS

INTRODUCTION ..................................................................................2

GUARANTEE ........................................................................................2

ENVIRONMENTAL PROTECTION .........................................................2

SPARES & SERVICING CONTACTS ......................................................2

TABLE OF CONTENTS ..........................................................................3

PUMP SAFETY INSTRUCTIONS .............................................................4

ELECTRICAL CONNECTIONS .............................................................. 5

OVERVIEW ..........................................................................................7

OPERATION .........................................................................................9

CLEANING & MAINTENANCE.............................................................11

FAULT FINDING .................................................................................... 12

PARTS LISTS & SPARES DIAGRAMS ......................................................13

TECHNICAL SPECIFICATIONS .............................................................16

DECLARATIONS OF CONFORMITY .....................................................17

PUMP SAFETY INSTRUCTIONS

1. Only use the pump in the manner and for the functions described in these

instructions.

2. These pumps are designed to pump water only. Never use for pumping

flammable liquids or corrosive chemicals of any kind.

3. Never allow the pump to run dry. Switch the pump OFF immediately the

task is completed.

4. An approved Residual Current Device (RCD) must be used when pumping

from ponds or swimming pools.

5. The submersible pump may only be used for pumping water from a

swimming pool when there is no person or animal in the pool.

6. Do not attempt to carry out any repairs on the pump until it is unplugged

from the power supply.

7. Always lift the pump using the handle with rope or chain attached if

necessary. Never lift or carry the pump by the power cable or by the float

switch cable.

8. Always disconnect the pump from the electrical supply before placing it

into, or removing from the water, and before any cleaning or

maintenance of the pump.

9. Remember, the operator or user is responsible for accidents or hazards

occurring to other people or their property.

10. Do not install the pump on sand, silt or mud which is likely to shift or

collapse.

11. If the electrical cable becomes damaged, it must be replaced, - not

repaired.

12. Keep the work area well lit. Dark areas invite accidents.

13. Do not over-reach. Keep your proper footing and balance at all times

when handling the pump in waterlogged areas.

14. Store the pump out of the reach of children and do not allow persons

unfamiliar with these instructions to operate the pump.

15. Do not abuse the electrical cable. Never use the cable for pulling or

unplugging the pump Damaged or tangled cables increase the risk of

electric shock.

16. Check the pump for damage before use. Any damaged part should be

inspected to ensure that it will operate properly and perform its intended

function. Any damage should be properly repaired or the part replaced.

If in doubt, DO NOT use the appliance. Consult your local dealer.

17. When operating outdoors, use an extension cable suitable for outdoor

use. Using the correct cable reduces the risk of electric shock.

18. Always use an approved cable extension suitable for the power rating of

this pump (see specifications), the conductor size should also be at least

the same size as that on the pump, or larger. When using a cable reel,

always unwind the cable completely.

19. Keep children and bystanders away while operating the pump.

Additionally, please keep these instructions in a safe place for future reference.

ELECTRICAL CONNECTIONS

All models EXCEPT HSE301A, 361A & HSEC651A should have their mains lead

connected to a standard 230 volt (50Hz) electrical supply through an

approved plug or a suitably fused isolator switch. We recommend that these

pumps be fitted with a Residual Current Device (RCD).

NOTE: This is mandatory when pump is used for pumping swimming pools.

Models HSE301, 361 & HSEC651A must be connected to a protected 110V

supply, through a suitably approved connector. On no account must a 230V,

13amp plug be used.

NOTE: If a portable 110V transformer is used, make sure it has a rated

capacity sufficient to take the load of the pump.

In the event that the pump is hard-wired into the electrical system, it must be

carried out in accordance with IEE regulations.

If used for draining swimming pools or ponds, the pump MUST be fitted with a

Residual Current Device (RCD), with a rated residual operating current of no

greater than 30mA.

WARNING: THIS APPLIANCE MUST BE EARTHED

IMPORTANT: The wires in the mains lead are coloured in accordance with the

following code:

Green & Yellow - Earth

Blue - Neutral

Brown - Live

As the colours of the flexible cable of this appliance may not correspond with

the coloured markings identifying terminals in your plug proceed as follows:

• Connect GREEN & YELLOW coloured cord to plug terminal marked

with a letter “E” or Earth symbol “ ” or coloured GREEN or GREEN

& YELLOW.

• Connect BROWN cord to terminal marked with a letter “L” or

coloured RED.

• Connect BLUE cord to terminal marked with a letter “N” or coloured

BLACK.

FUSE RATING

The fuse in the plug for this appliance must be rated according to the

Technical Specification on page 16.

If this product is fitted with a plug which is moulded onto the electrical cable

(i.e. non-rewirable) please note:

1. The plug must be thrown away if it is cut from the cable. There is a danger

of electric shock if it is subsequently inserted into a socket outlet.

2. Never use the plug without the fuse cover fitted.

3. Replacement fuse covers can be obtained from your local dealer or most

electrical outlets.

4. The fuse in the plug must be replaced with one of the same rating and this

replacement must be ASTA approved to BS1362.

IMPORTANT: If in doubt, consult a qualified electrician.

OVERVIEW

The CLARKE HSE range of submersible pumps are of rugged and durable

construction, designed for long lasting continuous operation. They are

suitable for discharging pools, ponds, fountains, pits and any waste water

drainage. They can handle foul water containing sewage or other

suspended material including sand up to a maximum of 3kg/m3to an

amount stated in the specifications for each model. They may be used for

pumping water, (including seawater) or water containing small solids in

suspension with particle sizes of up to 6-10mm in diameter, dependant upon

the size of pump. The pumps are not suitable for handling inflammable,

corrosive, explosive or dangerous liquids.

The range includes models 130, 200, 300/301, 360/361 and 650/651 as

itemised in the Technical Specification on page 16.

The HSEC650 & HSEC651A are fitted with a tungsten carbide cutter, and is

specially suited for heavily polluted water and waste solids, such as sewage,

light slurry, factory waste etc. The HSE200 is fitted with a strainer to prevent the

ingress of foreign matter.

Float switches are fitted to those models bearing an ‘A’ suffix, meaning the

pump will stop and restart automatically as the surrounding water level

changes. This makes them suitable for permanent or semi-permanent

installations, eg. installations where it is necessary to maintain a water at a

particular level without an operator in attendance.

FLOAT

SWITCH

DISCHARGE

OUTLET

STRAINER

PROTECTED

INLET

MAINS CABLE LIFTING HANDLE

As the water level rises, the switch will float and start the pump. As the water

level falls, so will the float switch, until it stops the pump. Float switches are

factory set to provide the correct ON-OFF switching mode.

•It is not recommended that these pumps be used for pumping

drinking water, as there is a remote possibility of water

contamination due to leakage of pump lubricant should the pump

malfunction or the oil seal become damaged.

All HSE pumps are provided with a thermal overload cut-out, so that in the

event the pump becomes overheated (due to becoming blocked etc.) the

pump will shut off automatically. When the blockage has been cleared, the

thermal overload will cool down and re-set and the pump can be re-started.

OPERATION

CONNECTION AND LOCATION

1. Place the pump in a vertical position resting on a firm, flat surface. If this is

not available, sit the pump on timber or house bricks, but ensure they are

not likely to collapse. Never install the pump on sand, silt, mud or ground

that is likely to collapse.

Automatic versions should only be placed in a sump which is large

enough not to restrict the movement of the float switch. It is advisable to

use a strainer when using the pump as a sump pump.

2. Keep the pump clear of

any sediment by standing

it on a platform or brick or

suspending from a rope

attached to the handle if

the pump is to be used

where there may be silt or

mud etc (e.g. garden

ponds).

3. Connect the outlet to the

largest diameter hose

available, as any

restrictions will reduce

capacity and put further

strain on the motor. The

outlet hose diameter for

each HSE pump is given in

the Technical

Specification on page 16.

4. Ensure that the hose diameter is equal to or greater than the diameter of

the pump outlet if a long run of discharge hose is being used.

5. Ensure the float has sufficient room to operate correctly if used in a

confined space such as a shaft or sump.

Note: When the pump is being used in a permanent or semi-permanent

installation, a check valve must be fitted in the delivery hose.

Suitable hoses are available from your Clarke dealer.

USING THE PUMP

1. Take all necessary precautions as described on page 4 before plugging in

the pump and switching ON. Where the pump is an automatic unit fitted

with a float switch, the pump will only run where there is sufficient depth of

water for the float to rise and activate the pump.

2. If the water is likely to freeze, the pump must be run continuously,

otherwise the pump must be removed from the water and stored in a frost

free location.

3. Never run the pump dry. Never run the pump with the body exposed for

more than 10 minutes.

4. When the water has been pumped out, disconnect from the power

supply. Avoid running the pump continuously.

AUTOMATIC THERMAL OVERLOAD

These pumps are fitted with automatic thermal overload protection. If the

pump overheats due to an obstruction in the pump, or pumping warm water

for example, it will shut off automatically. Switch the pump OFF and

disconnect from the mains supply. Check for blockages and allow the motor

to cool (at least 5 minutes) before attempting to restart, by which time the

cut-out will have reset.

ACCESSORIES

A wide range of accessories is available from your nearest CLARKE dealer, for

further information, contact your nearest dealer, or telephone CLARKE

International Sales department on 01992 565300.

PUMP PERFORMANCE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clarke Wasserpumpe Handbücher

Clarke

Clarke ECP20A1 Bedienungsanleitung

Clarke

Clarke FP150 Bedienungsanleitung

Clarke

Clarke CWBP300 Bedienungsanleitung

Clarke

Clarke CRWP1 Bedienungsanleitung

Clarke

Clarke CS85S Installations- und Betriebshandbuch

Clarke

Clarke DWP300A Bedienungsanleitung

Clarke

Clarke CU150 Installations- und Betriebshandbuch

Clarke

Clarke CM1 Installations- und Betriebshandbuch

Clarke

Clarke PW80A Bedienungsanleitung

Clarke

Clarke HIPPO Jr Installations- und Betriebshandbuch

Clarke

Clarke ISP11A Handbuch

Clarke

Clarke PSV3A Installations- und Betriebshandbuch

Clarke

Clarke LVP1A Bedienungsanleitung

Clarke

Clarke PW2 Bedienungsanleitung

Clarke

Clarke CVP1000 Kurzanleitung

Clarke

Clarke HSE120 Installations- und Betriebshandbuch

Clarke

Clarke ECP15A1 Bedienungsanleitung

Clarke

Clarke DW50 Bedienungsanleitung

Clarke

Clarke PS75 Bedienungsanleitung

Clarke

Clarke SPE800 Bedienungsanleitung

Clarke

Clarke CHHDP830 Bedienungsanleitung

Clarke

Clarke HSE RANGE Bedienungsanleitung

Clarke

Clarke PF75 Bedienungsanleitung

Clarke

Clarke PTP100 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung