Clifford Concept 50x Bedienungsanleitung

Owner'sManual

World-ClassAutoSecurity TM

concept

50x

Concept 50x is covered by one or more of the following Clifford Electronics U.S.A. patents:

4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464; 4,887,064; 4,890,108; 4,922,224;

4,997,053; 5,081,667; 5,146,215; 5,157,375; 5,467,070; 5,650,744 and other patents pending.

nPLEASE NOTE: Your factory-set 4-digit valet code is noted below. See pages 10-11

for information on using your valet code:

nIf you wish to change your valet code to a different 4-digit number, please refer

to the example on page 11. Write your new valet code in the space below:

WARNING:Forsecurityreasons,donotkeepthismanualin

your vehicle (since a thief could possibly access it and

learnof yoursecret valetcode). Assuch, pleasekeep this

manual in a safe place in your home.

Table of Contents

Standard Features of the Concept 50x .......................2

Your 4-button/12-channel remote controls.....................6

How to use your keychain remote control.......................6

What each button/channel does............................7

Anti-CodeGrabbing (ACG) with Random Code Encryption............8

Smart prior intrusion attempt alert ..........................8

How to interpret the chirps and indicator light flashes...............9

How to interpret the LED status indicator ......................9

AutoArming......................................9

AutoArming enable/disable..............................9

Visual acknowledgment ................................9

AutoArm & Lock.....................................9

Instant AutoArming bypass...............................9

UltraSecure Coded Valet Mode ..........................10

To enable valet mode.................................11

To exit valet mode...................................11

Setting your own secret valet code .........................11

Remote controlled valet mode entry and exit ....................11

Keyless entry in valet mode ..............................12

Sensor adjustment..................................12

Remote controlled override of one or both sensor zones.............12

AutoLock and AutoUnLock .............................12

Built-In Two-Point AutoImmobiliser .........................13

False Alarm Prevention and FACT — False Alarm Control and Test .......13

Smart AutoTesting ..................................14

Automatic malfunction bypass ...........................14

Multiple-event TotalRecall .............................14

SmartPowerUp II...................................15

Smart Self-Powered Siren with Digital ComLink ..................15

Unbreachable Digital ComLink............................15

Smart-charging.....................................15

Long-term chirp silencing...............................15

Remote controlled chirp muting...........................15

QuietChirps (muffled chirp sound level) .......................15

Automatic low battery warning ............................15

Noise abatement circuitry...............................15

User-selectable features...............................16

Step-by-step programming instructions ......................16

Changing the remote control battery.......................18

Adding new remote controls ............................18

How to erase the codes of lost or stolen remote controls.............18

Table of user-selectable features........................19-20

Standard Features of the Concept 50x

q✔Thatcham-Evaluated— The Concept 50x complies with the British

Insurance Industry’s Criteria for Vehicle Security as evaluated by

Thatcham, the Motor Insurance Repair Research Centre.

q✔Lifetime Warranty— For as long as you own the vehicle, Clifford will

repair or replace the control unit and remote controls free of charge (see

warranty card for full details).

q✔FACT — FalseA larmControl andTest — One of many patented Clifford

innovations, FACT absolutely, positively ends recurring false alarms.

q✔A Pair of 4-Button/12-Channel Remote Controls— For fingertip command

from a distance.

q✔Anti-CodeGrabbing (ACG) with Random Code Encryption— Today’s

criminals are shifting from code scanning to a new, much more efficient

method of electronic thievery: “code-grabbing.” When you use a car

alarm remote control, it transmits a digital code to your alarm. A thief

with a code-grabber can record that code right off the air from hundreds

of metres away, then play it back when you’re gone to disarm the alarm

and unlock the doors. Within seconds, your car is just another theft

statistic. Fortunately, Clifford’s Anti-CodeGrabbing (ACG) randomly

changes the transmitted code every time you press any of the remote

control buttons. And since these codes are selected by the system’s

microprocessor from an electronic file containing several trillion codes,

the remote control

NEVERsends the same code twice, and the system

control unit

NEVERaccepts the same code twice. That makes

code-grabbing utterly useless against the Clifford Concept 50x.

q✔Built-In Two-Point AutoImmobiliser — For the utmost in theft prevention,

two AutoImmobilisation circuits interrupt both the starter and

ignition/fuel pump whilst the system is armed. Even if a thief were to pull

the fuses or cut all the wires, the starter and ignition/fuel pump remain

immobilised.

nFailure-Proof Driving Safety — Even in the unlikely event of a system

malfunction, the AutoImmobiliser will not stop the engine whilst the vehicle

is being driven.

Standard Features of the Concept 50x (cont.)

q✔UltraSecure Coded Valet Mode— Requires a code that you may select to put

the system in valet mode or program in an additional remote. This ensures

that no thief can turn off your Concept 50x as they can with other alarms.

nRemote Controlled Valet Mode Entry and Exit— With just a press of a button on

your remote control, you can enter or exit valet mode. Indicator light flashes

visually confirm valet mode entry and exit.

q✔Dual-Zone Proximity Sensor— Two sensor zones provide full protection: If

someone is lurking near your car, the system will sound a warning tone.

But if a thief actually leans into the passenger compartment, the system

will instantly blast the siren. It is impervious to wind and temperature

variations that cause ultrasonic sensors to false alarm.

q✔Glass Tampering Sensor — Can detect attempts to break any of the

vehicle’s windows. An optional second microphone is available for larger

vehicles, such as estate vehicles.

q✔Dual-Mode “Chirp” Silencing —Whenever you wish, you may press a

button on the remote control to arm or disarm the system silently. It’s

perfect when parking at night in a quiet residential area. Or, if you prefer,

you may turn off the chirps on a long-term basis until you wish to turn

them back on.

q✔Remote Door Locking/Unlocking with Built-in Relays— No more fumbling

with keys in the dark or bad weather!A single press of a button on the

remote control simultaneously arms your system and locks the doors.

Another press disarms and unlocks.

nUser-Selectable AutoLock— Automatically locks the doors the instant you turn

on the ignition to start the engine.

nUser-Selectable AutoUnLock— Unlocks when you turn off the engine.

q✔Smart Self-Powered Siren with Unbreachable Digital ComLink—

Continuous two-way digital communication between the system and the

siren assures that if, at any time, the system fuse is pulled or any siren

wire is cut, the siren will instantly activate for five minutes. Yet when the

system is disarmed and power is interrupted, the siren will remain silent.

nAutomatic Low Battery Warning: If the siren’s back-up battery voltage is low,

the normal arm and disarm chirps will be muted to alert you of the problem.

Once recharged, the chirps will automatically be restored.

Standard Features of the Concept 50x (cont.)

q✔Smart Remote Boot Release Capability— Assures that the optional remote

boot release can be activated only if the system is in its disarmed state, thus

avoiding the possibility of falsely triggering the system. This feature also

ensures that the boot release cannot be remotely activated whilst driving.

q✔Remote Window/Sunroof Closure Capability— On certain vehicles

(including several models of Mercedes Benz, Jaguar, Volkswagen, Audi

and BMW), the integrated timer and an optional relay can be used to

automatically close the power windows and sunroof every time you

remotely arm.

q✔QuietChirp— Whenever you desire, you may choose to lower the decibel

volume of the arm and disarm chirps to a level that is clearly audible but less

obtrusive than the full-volume chirps. All it takes is a few flicks of a switch.

q✔User-Selectable AutoArming— Automatically arms itself “passively”if

you forget and has all these additional features:

nAutoArming Enable/Disable — You may disable or re-enable the AutoArming

feature with just a few flicks of a switch.

nAutoArm & Lock— You may set the system to automatically lock the doors

every time the system AutoArms.

nVisual Indication— Two indicator light flashes signal that the 30-second

countdown to AutoArming has started.

nInstant AutoArm Bypass — Just a quick turn of the ignition switch will bypass

AutoArming for one cycle — perfect when fueling the vehicle. AutoArming

is automatically restored the next time you park.

q✔Patented Smart Prior Intrusion Attempt Alert — When you return to your

vehicle and remotely disarm, a special chirp and indicator light flash

sequence will audibly and visually alert you if an intrusion attempt was

foiled whilst you were away. Your Concept 50x will even identify the

specific trigger or sensor that detected the intrusion attempt.

q✔Remote Controlled Courtesy Lighting— For your personal safety and

convenience, when you remotely disarm your Concept 50x, the interior lights

turn on and stay on until you start the engine or 30 seconds, whichever

occurs first.

Standard Features of the Concept 50x (cont.)

q✔Built-In Indicator Light Flasher— On-board relay and circuitry will visually

confirm door lock and system status.

q✔Patented Smart AutoTesting— Automatically tests all system triggers and

sensors every time you remotely arm and warns you if you accidentally

arm your Concept 50x system with the bonnet or boot open. If there is a

genuine trigger or sensor malfunction, the system will specifically

identify the problem, thereby eliminating time-consuming and costly

trouble-shooting.

q✔Patented Malfunction AutoBypass with Automatic Monitoring— In the

unlikely event of a trigger or sensor malfunction, Concept 50x

automatically bypasses the malfunction and arms all other points to

continue relentless protection of your vehicle. If you simply left the

bonnet, boot or a door open when you armed, just close it and the system

will again monitor that trigger point.

q✔Multiple-Event TotalRecall— Concept 50x’s memory stores the identity of

the last eight trigger and sensor activations. This provides an invaluable

diagnostic means, since, whenever you wish, the system will visually

identify the activated triggers and sensors in reverse chronological order.

q✔Patented Remote Control Code Learning with MultiRemote Recognition —

Just a few flicks of a switch lets you match to the system up to 4 different

12-channel Clifford ACG remote controls. Just as easily, a lost or stolen

remote control can be deleted.

q✔Multiple-Car Control— You may use the same remote to control Concept

50x systems on up to six of your other vehicles.

q✔High-Luminescence LED Status Indicator — Adds visual deterrence and

identifies system status.

q✔Patented SmartPowerUp II— When power to the system is disconnected,

the system’s nonvolatile memory always remembers the security system’s

last state (armed or disarmed) and returns to that state when power is

restored. So if a thief disconnects the power and then restores it in an

attempt to start the car, the system will instantly re-arm.

Your 4-button/12-channel remote controls

The 4-button/12-channel remote controls are ultra-sophisticated miniature radio

transmitters powered by a tiny 12-volt battery. A weak remote control battery will

reduce range (see page 18 for battery replacement instructions). Electrical interference

and even sunspots can interrupt the signal from your remote control to the system. If

this happens, repeatedly press the remote control button (this is more effective than

holding the button). The 4-button/12-channel remote control is the key to your

system. It has Clifford’s Anti-CodeGrabbing (ACG) technology for the ultimate

protection against “code-grabbing”devices (see page 8). You will use your remote

to arm and disarm the system, lock and unlock the doors, engage and disengage the

AutoImmobilisation circuits, enable/exit valet mode and command options such as a

remote boot release, power window operation and even remote engine starting.

How to use your keychain remote control

Your remote control can individually

command up to 12 different system functions

and options. It’s like having a TV with 12

channels. You change channels (functions)

with your keychain remote control. But

instead of putting 12 buttons on the remote,

we made it easy: First, the button you use

the most — button 1 to arm, disarm, lock and

unlock — is larger than the others. Buttons 2,

3 and 4 are the smaller buttons to the right,

below and left of button 1. The LevelShift

button on the side of the remote control allows you to select channels 5–12:

nTo transmit either channel 1, 2, 3 or 4: Just press either button 1, 2, 3 or 4. For

instance, to transmit channel 3, press button 3. whilst you transmit, the LED

indicator will blink once every second: this indicates level 1.

nTo transmit either channel 5, 6, 7 or 8: Press the LevelShift button once. This

shifts buttons 1–4 to level 2 (channels 5–8). Then press the desired button within

the next 7 seconds. For instance, to transmit channel 5, press the LevelShift button

once, then press button 1. whilst you transmit, you’ll notice that the LED indicator

blinks twice, pauses, blinks twice, etc.: this indicates level 2.

nTo transmit channel 9, 10, 11 or 12: Press the LevelShift button twice. This shifts

buttons 1–4 to level 3 (channels 9–12). Then press the corresponding button within

the next 7 seconds. For instance, to transmit channel 10, press the LevelShiftbutton

twice, then press button 2. whilst you transmit, you’ll notice that the LED blinks

three times, pauses, blinks three times, etc.: this indicates level 3.

NOTE : One second after you stop transmitting level 2 or level 3 (channels 5–12),

the remote control automatically returns to level 1 (channels 1–4).

What each button/channel does

Your Concept 50x remote controls come preprogrammed so that certain channels

command certain functions. The following chart indicates what each remote control

channel number does, and how to transmit each channel number.

Factory settings of the 12 remote control channels

Transmittin

g channel

number:Causes the system to:Press the

LevelShift

button?

How

many

times?

Press

button

number

1arm or disarm and lock or unlock the doors no—1

2optionally turn on a timed device (if the system is armed)

AND

optionally pop the boot (if the system isdisarmed )no—2

3silentlyarm or disarmno —3

4activate an optional accessory no —4

5arm or disarm a Concept 50x on your second vehicleyesonce1

6Command a Concept 50x on your second vehicle to

optionally turn on a timed device (if the system is armed)

AND

optionally unlatch the boot (if the system is disarmed )

yes once 2

7activate an optional accessory

controlled by a Concept 50x on your second vehicleyes once3

8activate another optional accessory

controlled by a Concept 50x on your second vehicleyes once4

9remotely enable/exit valet mode yes twice 1

10 remotely turn off one or both sensor zones yestwice2

11 activate an optional accessory

controlled by a Concept 50x on your third vehicleyes twice3

12 activate another optional accessory

controlled by a Concept 50x on your third vehicleyes twice4

TO ARM

THE SYSTEM........Press button 1 (channel 1) once. You will heartwo chirpsand the

indicator lights will flash twice. The dashboard LED will flash

repeatedly and the car doors will automatically lock.

TO DISARM

THE SYSTEM........Press button 1 (channel 1) again. One chirpand one indicator

light flash confirms disarming. In addition, the doors will auto-

matically unlock and the interior lights will turn on and stay on

for 30 seconds or until you start the engine, whichever occurs first.

TO SILENTLY

ARM OR DISARM

THE SYSTEM........

Press button 3 (channel 3). Your Concept 50x system will arm or

disarm with all the indications noted above exceptfor the chirp

acknowledgments.

TO REMOTELY

TURN ON A TIMED

ACCESSORY.......

Button 2 (channel 2) controls an electronic interlock that lets you

separately command two functions with the same channel: one

when the system is armed, another when disarmed. Pressing

button 2 whilst the alarm is armed will activate the system’s

timed output for any duration you wish between one second and

two minutes (the factory setting is 30 seconds; see

User-selectable featureson pages 16-20).

TO REMOTELY

OPEN THE BOOT....Button 2 (channel 2) can control another function when the system

is disarmed, such as an optional remote boot release. Pressing

button 2 whilst the alarm is disarmed will remotely open the boot.

TO ACTIVATE

OTHER OPTIONS

REGARDLESS

ALARM STATE .......

Button 4 (channel 4) and channels 5–9 and 10–12 (see How to use

your keychain remote controlon page 6) can activate accessories

such as the IntelliStart remote engine starter, remote power

window control, ACG Garage Door Opener Interface, Concept

50x systems and accessories on your other vehicles, etc.

WHAT ABOUT

CHANNEL 9?........Channel 9 is used to remotely enable or exit valet mode. See page

11 for more information.

Anti-CodeGrabbing (ACG) with Random Code Encryption

Protects you and your automobile from the most effective and onerous car stealing

device ever used by car thieves — a code-grabber. Code-grabbers literally record,

from hundreds of metres away, the code sent by your car alarm remote control.

Then the thief simply plays back the code when you’re gone, instantly disarming the

alarm and unlocking the doors. It’s like giving the thief your car keys. But not if you

have the Concept 50x, since it utilises complex digital signal processing and

unbreachable encryption to randomly change the digital code every time you use the

remote control. Your remote control will nevertransmit the same code twice, and

the control unit will neveraccept the same code twice. Thus the code recorded and

played back by the thief’s code-grabber will never be accepted by your Concept 50x.

Smart prior intrusion attempt alert

If you hear three chirps when you remotely disarm instead of the usual one chirp, it

means that a trigger or sensor was activated in your absence. When you enter the

vehicle and turn on the ignition (or start the engine), the LED will blink 1–6 times,

pause, then repeat the blink cycle 4 more times. Count the number of blinks in one

cycle and refer to the chart on page 14 to identify the trigger or sensor that was

activated whilst you were away.

Andere Handbücher für concept 50x

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Clifford Autoalarmanlage Handbücher

Clifford

Clifford 4606X Bedienungsanleitung

Clifford

Clifford concept 50 Bedienungsanleitung

Clifford

Clifford ACE 2000 Bedienungsanleitung

Clifford

Clifford Cyber 5 Bedienungsanleitung

Clifford

Clifford AvantGuard 2 Bedienungsanleitung

Clifford

Clifford intelliguard 800 Bedienungsanleitung

Clifford

Clifford 570.4X Bedienungsanleitung

Clifford

Clifford Delta IV Bedienungsanleitung

Clifford

Clifford AvantGuard III Bedienungsanleitung

Clifford

Clifford Model RSX3.5 Bedienungsanleitung

Clifford

Clifford concept 50x Bedienungsanleitung

Clifford

Clifford AvantGuard 5.1 Bedienungsanleitung

Clifford

Clifford BlackJax 5 Bedienungsanleitung

Clifford

Clifford 420.4X Bedienungsanleitung

Clifford

Clifford Matrix 1 Bedienungsanleitung

Clifford

Clifford AvantGuard 4 Bedienungsanleitung

Clifford

Clifford IntelliGuard Millennia Bedienungsanleitung

Clifford

Clifford Polaris 4 Bedienungsanleitung

Clifford

Clifford Advantage Bedienungsanleitung

Clifford

Clifford 330.3X Bedienungsanleitung

Clifford

Clifford ARROW 5 Bedienungsanleitung

Clifford

Clifford SmartWindows 4 Bedienungsanleitung

Clifford

Clifford Concept 40 Bedienungsanleitung

Clifford

Clifford 330X1 Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung

Viper

Viper 560XV Bedienungsanleitung

SECO-LARM

SECO-LARM 300C Bedienungsanleitung

Python

Python 660XP Bedienungsanleitung

Megalarm

Megalarm MEGA 3600 Bedienungsanleitung

CrimeStopper

CrimeStopper CS-2011RS Series III Super Rage Bedienungsanleitung