Code Alarm CA 420A Bedienungsanleitung

CA 420A Owners Manual

CAUTION!

Be certain that the vehicle is outdoors before using this or any re-

motevehiclestartingdevice. Arunningengineproducesdangerous

carbon monoxide fumes which can be harmful or fatal if prolonged

exposure occurs. DO NOT remote start the vehicle if the car is

garaged

SAFETY (Red Handled ) CONTROL SWITCH:

The control switch allows you to temporarily disable the remote starting

function of your Remote Start system. To disable the system, move the red

handled control switch to the OFF position.

REMOTESTARTING THE VEHICLE:

The system WILL NOT start the vehicle if any one of the following situations

exist:

1. The vehicle's hood is opened.

2. The gear shift selector is not in Park.

3. The brake pedal is depressed.

4. The safety control switch is in the Off position.

1. To start the vehicle, press and release the transmitter button 2 times*

within 2 seconds. The vehicle will start and remain running for the pre-

programmed 5, 10, 15, 20 minute run cycle. As a visual indication, the

parking lights will flash or remain on depending on the setting by your

installation center.

2. When you arrive at the vehicle, turn the ignition key to the ON position

(Do not try to restart the vehicle), then step on the brake pedal to disengage

the remote start. The vehicle will continue to run, but now on it's own

power.

SHUTINGDOWNTHE REMOTE START:

To shut down the remote start feature from the transmitter press and

release the transmitter button 2 times* within 2 seconds.

* NOTE: Remote Start activation/shutdown can be configured for single or

double press, refer to the programable features section of the installation

manual.

TRANSMITTER PROGRAMMING:

If the need arises for programming of additional or replacement transmitters,

simply follow the 4 steps outlined below:

1. Turn the ignition to the ON position.

2. Press and release the programming switch 3 times.

3. Press and hold the button of the transmitter you wish to add for 3

seconds. The parking lights will flash indicating the transmitter has been

learned.

4. Repeat step 3 for each transmitter up to a total of 4.

Code Systems, Inc. Limited Lifetime Warranty

Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle

security product (the “Product”), purchased from an authorized CODE dealer, that (except as

provided below) should this Product under normal use and conditions, be proven defective in

material or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS

ORIGINALLY INSTALLED, such defect(s) will be repaired or replaced (at CODE’s option) without

charge for parts directly related to repairs of the defect(s).

Switches, indicator lights, and transmitter cases are similarly warranted to the original purchaser for

a period of one (1) year from the date of purchase of the Product.

CODE accessories, sold separately, are covered by the applicable warranty accompanying the

accessory.

This warranty is non-transferable, non-assignable and is voided when: (1) the Product is removed

from the vehicle in which it was originally installed; or (2) the vehicle in which the Product was

originally installed is transferred to another party.

This warranty does not apply to any product damaged by accident, physical or electrical abuse,

improper installation, alteration, or use contrary to its intended function, fire, flood, or other natural

acts.

In order for the Product to be repaired or replaced under the terms of this warranty, the defective

Product must be returned to an authorized CODE dealer and accompanied by a copy of the retail

sales receipt. The date of purchase and year, make and model of the vehicle in which the Product

was originally installed must be clearly indicated on the sales receipt.

This warranty is exclusive and CODE MAKES NO OTHER WARRANTIES EXPRESSED OR IM-

PLIED. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT-

ABILITYAND FITNESS FORA PARTICULAR PURPOSE, SHALLBE LIMITED TO THE DURATION

OF THIS WRITTEN WARRANTY. IN NO CASE SHALL CODE BE LIABLE FOR ANY CONSE-

QUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,

EXPRESS OR IMPLIED, WHATSOEVER.

CODE does not warrant that the Product cannot be compromised or circumvented. THE EXTENT

OF CODE’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACE-

MENT PROVIDED ABOVE AND, IN NO EVENT SHALL CODE’S LIABILITY EXCEED THE PUR-

CHASE PRICE PAID BY THE ORIGINAL PURCHASER OF THE PRODUCT WITHOUT INSTALLA-

TION LABOR.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation may not apply to you. This warranty gives you specific legal rights and you may

also have other rights which vary from state to state.

Inhaltsverzeichnis

Andere Code Alarm Autoalarmanlage Handbücher

Code Alarm

Code Alarm PowerCode PC 6100 Bedienungsanleitung

Code Alarm

Code Alarm ca 1552 Professional Series Bedienungsanleitung

Code Alarm

Code Alarm CATX120 Betriebsanleitung

Code Alarm

Code Alarm TW-1 Bedienungsanleitung

Code Alarm

Code Alarm ca6554 Bedienungsanleitung

Code Alarm

Code Alarm ca 1151 Bedienungsanleitung

Code Alarm

Code Alarm SRT 5500 Bedienungsanleitung

Code Alarm

Code Alarm PROFESSIONAL SERIES Bedienungsanleitung

Code Alarm

Code Alarm CA 6151 Bedienungsanleitung

Code Alarm

Code Alarm CA 1550 Bedienungsanleitung

Code Alarm

Code Alarm UTXPR Betriebsanleitung

Code Alarm

Code Alarm CA1B5 Bedienungsanleitung

Code Alarm

Code Alarm CA 170 Bedienungsanleitung

Code Alarm

Code Alarm CATX630 Betriebsanleitung

Code Alarm

Code Alarm ca 5152 Bedienungsanleitung

Code Alarm

Code Alarm SRT 1600 Bedienungsanleitung

Code Alarm

Code Alarm Professional 1000 Bedienungsanleitung

Code Alarm

Code Alarm ELITE Series Bedienungsanleitung

Code Alarm

Code Alarm CATX610 Betriebsanleitung

Code Alarm

Code Alarm CATX110 Betriebsanleitung

Code Alarm

Code Alarm Power Elite PC 4100 Bedienungsanleitung

Code Alarm

Code Alarm CA-640 Bedienungsanleitung

Code Alarm

Code Alarm CA 180 Bedienungsanleitung

Code Alarm

Code Alarm Ca 1053 Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Clifford

Clifford 3606X Bedienungsanleitung

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

Clifford

Clifford Sabre II Bedienungsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Ultra Start

Ultra Start 450 SERIES Bedienungsanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Excalibur

Excalibur AL-1860-EDPB Bedienungsanleitung

Clifford

Clifford CYBER 2 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung