CODELOCKS CL4510 Bedienungsanleitung

K3 Connect User Guide

CL4510

CL5510

CL6510

Image for illustration only

Document Version: 0.2

Status: DRAFT

Author: Martin Clayton

REGULATORY COMPLIANCE

The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired

operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Download the App

The K3 Connect App is available on Apple App Store and Google Play Store

1. Search the App Store (Apple iOS) or Play Store (Android) for the K3 Con-

nect App

2. Install the App on your iOS or Android device

3. After installation, open the App

4. If asked, choose whether to allow notifications (unlocking notifications,

etc)

5. Touch Create Account...

K3 Connect App

Search the Apple App

or Google Play stores

Notifications

Choose whether to al-

low notifications

Create Account

Click the Create Ac-

count button

Enter Details

Enter your details and

choose a password

Validation

Check your email for the

validation code

Success!

The K3 Connect App is

ready for use

1. Enter an account name, email address and choose a password. It is rec-

ommended to leave password and backup-to-cloud enabled.

Note: You will need to enter a valid email address that you have access

to. As part of the registration process, an email containing a validation

code will be sent to that email address

2. Touch Next to continue

3. Check your email account for the validation email. Enter the validation

code contained within the email and touch Next

Page 1

Figure 6

Line 2

Line 3

1. Open the K3 Connect App (if not already open)

2. Touch the +button (top-right) of the screen

3. Enter the lock DIN

CL4510: cl4510

CL5510: cl5410

CL6510: cl6510

4. Enter a name for the lock (we recommend that you choose a meaningful

name)

5. Touch the icon (top-right) of the screen

6. Enter the following sequence into your lock:

Command: #Master Code • 00 • 1 ••

Example: #12345678 • 00 • 1 ••

Note: If you have changed your Master Code, substitute the

code used in the example above with your own code.

7. The lock will now pair with your phone

8. When complete, you may be prompted to set-up the WiFi Gateway—

touch Not Now. This step will be explained later in this guide

Pairing

Enter the pairing com-

mand into your lock

Lock DIN

Use the correct DIN for

your lock

Lock Details

Enter the lock DIN and

choose a name

Lock List

For new accounts, this

list will be empty

Synchronising

The phone and lock will

now synchronise

Page 2

Basic Functions

From the lock list, you can unlock any lock within range1, synchronise, view lock

info and view logs.

1. In the lock list, swipe the lock left

2. You will see Info, Logs and Sync options

Info: View or change lock settings

Logs: View audit entries (synchronise to retrieve latest logs)

Sync: Synchronise the settings between the lock and App and retrieve

latest logs

3. To unlock the lock, simply touch the lock in the lock list—the lock icon will

turn green to confirm unlocked status

4. If asked, choose whether to allow notifications (unlocking notifications,

etc)

5. Click Create Account…

1Using the lock in conjunction with the WiFi gateway can effectively extend the

range of operation.

Unlocked

Lock status now shows

green

Unlocking

Confirmation of unlock-

ing command

Actions

Primary actions availa-

ble for the lock

Lock List

All locks paired under

the current account

Page 3

Complete

The synchronisation is

complete

In Progress

The synchronisation is in

progress

Lock List

Select Sync to begin

synchronisation

Page 4

Synchronising

Once you have made changes to the lock settings, added new Clients or need

to see the latest audit information, you need to synchronise the App with your

lock.

1. In the lock list, swipe the lock left

2. You will see Info, Logs and Sync options

Info: View or change lock settings

Logs: View audit entries (synchronise to retrieve latest logs)

Sync: Synchronise the settings between the lock and App and retrieve

latest logs

3. Touch Sync

4. Touch OK once the synchronisation is complete

Note: You will need to be within range of the lock. The effective range is

up to 10m line-of-sight. Objects and walls will affect the effective range.

Delete Sub-Master

Delete the Sub-Master

Code

Master Code

Change the Master

Code

Parameters

Modify the general lock

settings

Parameters

Modify the general lock

settings

Lock Settings

View & access lock in-

formation & settings

Sub-Master Code

Change the Sub-Master

Code

Lock Settings & Parameters

The lock settings can be opened by swiping left on the lock in the lock list and

clicking on info (see page 3).

1. The lock settings will now be available. Information displayed will include

the lock name, battery status and date/time information

2. Touch Parameters

3. The parameters screen provides access to all settings that apply to the

lock as a whole including feature selection, day lock-out, code free and

Master & Sub-Master Code changes

4. You can change any setting by touching the setting label or, where avail-

able, by sliding the switch to enabled (green) or disabled (grey)

Help: Remember to synchronise to apply the changes to the lock

Master & Sub-Master Codes

1. By default, you lock is preset with the Master Code of 12345678. It is rec-

ommended to change this default code to one of your own choice

2. Touch Change Master Code or Change Sub-Master Code to change the

respective code

3. Enter your new choice

4. Touch the to confirm

You can delete the Sub-Master Code by touching Delete Sub-Master Code on

the parameters screen.

Help: Remember to synchronise to apply the changes to the lock

Page 5

Suspend/Activate

Suspend or activate all

the Code-Free Modes

Set Code-Free Mode

Up to 10 Code-Free

Modes can be set

Code-Free Mode

View current Code-Free

status

Code-Free

Code-Free allows you to set the lock to automatically unlock at pre-determined

times. Up to 10 different Code-Free Modes can be activated.

1. From the Parameters screen (see page 5), touch Code-Free Modes

2. To set a Code-Free Mode, touch the relevant mode (0-9) and select the

days of operation and the start & end times

3. You can activate and suspend all Code-Free Modes by touching the Ac-

tions button. Suspending all Code-Free Modes will revert the lock to nor-

mal operation (normally locked)

Note: A permitted Code-Free Mode will override a non-permitted Code-

Free Mode.

Help: Remember to synchronise to apply the changes to the lock

Page 6

Figure 1

Line 2

Figure 2

Line 2

Figure 4

Line 2

Figure 5

Line 2

Figure 6

Line 2

Line 3

Page 7

General Settings

The following settings can be updated via the Parameters screen. Touch a set-

ting to change:

 Emergency Open Cancellation - when the REM 2 input has been trig-

gered, the lock will remain open for 30 minutes. This setting reverts the lock

to normal operation

 Keypad Illumination - change if and how the keypad illuminates

 Re-Lock Delay - how long the lock will remain unlocked after a successful

unlocking operation

Help: Remember to synchronise to apply the changes to the lock

Day Lock-Out

Lock out all clients on the specified days.

1. From the Parameters screen (see page 5), touch Day Lock-Out

2. Select/de-select days for access by touching the relevant days

3. Touch the to confirm (this will enable Day Lock-Out if not already ena-

bled

4. To disable Day Lock-Out, from the Parameters screen, swipe the switch

adjacent to the Day Lock-Out pattern

Note: If a client has a an Active Period that conflicts with the Day Lock-

Out, the Active Period takes priority.

Help: Remember to synchronise to apply the changes to the lock

Figure 1

Line 2

Figure 2

Line 2

Figure 4

Line 2

Page 8

NetCode

NetCode allows you to create and share a 6 digit code that will give access to

the lock for a specified period without needing a Bluetooth or WiFi1connection

to the lock.

There are four modes available: Standard (Multiple Use), Standard (Single Use),

URM (Long Term Rental) and ACC (Medium Term Rental)

1. From the Parameters screen (see page 5), touch NetCode Mode

2. Select the required mode

1WiFi connection is via the WiFi Gateway.

Help: Remember to synchronise to apply the changes to the lock

Delete a NetCode

This feature enables you to block a NetCode:

1. Enter the NetCode you wish to block

2. Confirm the NetCode

3. Touch to confirm

Help: Remember to synchronise to apply the changes to the lock

Andere Handbücher für CL4510

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CODELOCKS Sperren Handbücher

CODELOCKS

CODELOCKS KitLock Slam Latch Bedienungsanleitung

CODELOCKS

CODELOCKS CL255 Administratorhandbuch

CODELOCKS

CODELOCKS 4000 Series Bedienungsanleitung

CODELOCKS

CODELOCKS CL5500 SERIES Bedienungsanleitung

CODELOCKS

CODELOCKS Kit-Lock KL1100 Bedienungsanleitung

CODELOCKS

CODELOCKS CL5000 Bedienungsanleitung

CODELOCKS

CODELOCKS CL500 Bedienungsanleitung

CODELOCKS

CODELOCKS CL50 Bedienungsanleitung

CODELOCKS

CODELOCKS CL5510 Bedienungsanleitung

CODELOCKS

CODELOCKS CL5500 SERIES Bedienungsanleitung

CODELOCKS

CODELOCKS CL250 Administratorhandbuch

CODELOCKS

CODELOCKS KL1000 NetCode Bedienungsanleitung

CODELOCKS

CODELOCKS CL300 Bedienungsanleitung

CODELOCKS

CODELOCKS CL400 Bedienungsanleitung

CODELOCKS

CODELOCKS CL1200 Bedienungsanleitung

CODELOCKS

CODELOCKS CL4510 Bedienungsanleitung

CODELOCKS

CODELOCKS CL4500 Bedienungsanleitung

CODELOCKS

CODELOCKS CL210 Bedienungsanleitung

CODELOCKS

CODELOCKS NANO90 Bedienungsanleitung

CODELOCKS

CODELOCKS CL200 Bedienungsanleitung

CODELOCKS

CODELOCKS CL1000 Bedienungsanleitung

CODELOCKS

CODELOCKS CL100 Bedienungsanleitung

CODELOCKS

CODELOCKS CL5020 Bedienungsanleitung

CODELOCKS

CODELOCKS CL4510 Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung