Cognex DataMan 200 Bedienungsanleitung
COGNEX®
DataMan®200
Quick Reference Guide
ii DataMan 200 Quick Reference Guide DataMan 200 Quick Reference Guide iii
Section Title xxxx • xxxxx • xxxxx • xxxxx • xxxxx Page 2
1Getting Started DataMan 200 Systems • DataMan 200 Image Formation
Options • DataMan 200 Accessories Page 4
1
DataMan Software Page 14
3Start the Setup Tool • Use the Setup Tool Menu Bar •
DataMan 200 Triggering • Trigger Modes • Training the
Reader
1Connections Page 22
4C-Mount Option • Installing a C-Mount Lens • Liquid
Lens • EtherNet/IP Support • I/O Cable • Acquisition
Triggering • High-Speed Output Lines • High-Speed
Output Wiring • Ethernet M12 to RJ45 Cable • RS-
232 Cable • DataMan 200 Specications • Multi-Port
Connections
1Compliance Information, Warnings
and Notices Page 38
5Compliance Notice • Warnings and Notices
Setting Up Your DataMan Reader Layout • Setting the Focus Position • Mounting
the Reader • Connecting the Reader • Reading Distances
• Install DataMan 200 Software • Troubleshooting an
Ethernet Connection • DataMan 200 Imager Specications
2Page 6
4 DataMan 200 Quick Reference Guide DataMan 200 Quick Reference Guide 5
DataMan 200 Systems
DataMan 200 Image Formation Options
High-Speed
Part Moving
Applications
1DMax+™ —
Best-In-Class
1-D Reading
IDQuick™ —
High-Speed
2-D Reading
2DMax™ —
Difcult DPM
Reading
DataMan 200S*
(DMR-200S-xx)√ √
DataMan 200QL**
(DMR-200QL-xx) √ √
DataMan 200Q
(DMR-200Q-xx)√ √ √
DataMan 200X
(DMR-200X-xx)√ √ √ √
Description Build Option Field Upgradeable
Manual Focus Option
(DMR-200x-00)
User-settable focus
positions from 40 to
105mm. √N/A
Liquid Lens Option
(DMR-200x-01)
Software-controlled
adaptive autofocus. √Yes
C-Mount Option
(DMR-200x-02)
Allows use of
customer-supplied
C-mount lenses.
√No
DataMan 200 Accessories
CD-ROM
(Setup Tool and Drivers)
(206-6400-330)
Quick Reference
Guide
(590-7138)
Mounting bracket
(DM100-
UBRK-000)
Ethernet M12 to RJ45 cable
(CCB-84901-y00x-xx,
y straight/angled, xx
species length)
Liquid Lens Module
(DM200-LLM-000)
I/O cable
(CCB-M8IO-xx)
RS-232 cables
(CCB-M8X4-xx)
AC Power over
Ethernet (PoE)
Injector
(CPS-AC-POE1A-xx)
24V Power over
Ethernet (PoE) DIN-
RAIL Mount Adapter
(CPS-24V-POE1)
Red lens cover (ESD-
safe)
(DM100-RLC-000)
Clear lens cover (ESD-
safe)
(DM100-CLC-000)
Harsh Environment
Enclosure
(DM100-HENCL-00)
Pivot Mounting
Bracket
(DM100-PIVOTM-00)
*S: Maximum decode rate of 5 codes / sec
**QL: 1D / Stacked symbols only
6 DataMan 200 Quick Reference Guide DataMan 200 Quick Reference Guide 7
Reader Layout
Pushbutton
• Push to read
• Push and hold 3
seconds to train
• Use Setup Tool to
program additional
button functions
Setting the Focus Position
DataMan can operate in one of three distance ranges. To set the focus
position:
Set focus position.
Tighten screws in order
shown. Maximum torque
for the cover screws is 9
N-cm (0.8 pound-inch).
Disconnect
DataMan from
power before
adjusting
focus
Illumination LEDs (2)
Laser apertures (2)
(aiming)
Mounting holes
(M3 X 5)
System
• Yellow: Power
• Green: Ethernet connected
• Blink: Communication
(RS232, Ethernet or both)
User
• Yellow: Untrained
• Green: Trained
• Blinking: Trigger
Status
• Green (pulse): Read
• Red (pulse): No read
• Red/Green (long pulse): Train
or Optimize Focus result
2.
Remove screws
and lens cover.
1.
Replace lens cover
and screws.
3.
1
2
3
4
21.122.8
Ethernet RS-232 I/O
63.45
19.5
37.0
42.0
The size of the holes
in the standard lens
cover is M2x6. For
SHD, it is M2x18.
Maximum screw
head diameter is 4
mm.
15°
(40 mm)
COGNEX
mm 20
20
20
40
40
40
60
60
60 80 100 120
34 x 22 50 x 32 77 x 49
140 160 180
M3 x 5
M3 x 5
8 DataMan 200 Quick Reference Guide DataMan 200 Quick Reference Guide 9
Mounting the Reader
Mount the reader at
a slight angle (15°)
to reduce reections
and improve reader
performance.
Horizontal eld of view for the DataMan 200 at working distances of 40mm,
65mm and 105mm (with and without optional liquid lens):
Disconnect DataMan from power before removing or
changing cables.
Connecting the Reader
Ethernet
RS-232 PoE injector
In
Out
Using an RS-232 connection can be necessary to congure the reader
with parameters that allow it to communicate over your Ethernet
network.
M12 to RJ45
Supply power to the reader using a Power over Ethernet (PoE) injector.
Cognex recommends the following connection sequence:
1. Connect the PoE injector with the Ethernet installation (both sides of
the patch cable).
2. Connect the power cord (AC 230V/110V) to the PoE injector.
3. Connect the reader to the PoE injector.
(optional)
To disconnect the reader:
1. Disconnect the reader from the PoE injector.
2. Disconnect the power cord from the PoE injector.
3. Disconnect the PoE injector from the Ethernet installation.
6 mil
8 mil
10 mil
12 mil
20mm 40 60 80 100 120 140 160 180
105
40
65
105
40
65
105
40
65
10 DataMan 200 Quick Reference Guide DataMan 200 Quick Reference Guide 11
Reading Distances
Supported range of reading distances for four code sizes (6, 8, 10, and 12 mil)
at each of the three focus positions (40mm, 65mm, and 105mm).
RS-232 connection
12 DataMan 200 Quick Reference Guide DataMan 200 Quick Reference Guide 13
Install DataMan 200 Software
Troubleshooting an Ethernet Connection
1. Check the DataMan Release Notes for a full list of system requirements.
2. Insert CD-ROM and follow the on-screen prompts.
3. Connect the DataMan 200 to your PC.
4. Launch the Setup Tool and click Refresh.
The reader will appear under COM ports, Network devices, or both.
5. Select a COM port listing or Network devices listing and click Connect.
Ethernet connection
“DM200_” with last 6
characters of MAC address,
printed on back of the
reader
Based on your network conguration, the Setup Tool may not be able
to communicate with the reader and it will not appear in the list of
Network devices.
First check your Ethernet connection with the reader and click Refresh
in the Setup Tool. Next, scan the Enable DHCP code in the DM200
Conguration Codes document available from the Start menu. This
might allow the reader to acquire a suitable IP address from a DHCP
server on your subnet.
If the reader still does not appear, you can use either the Add Device or
Force Network Settings options in the Setup Tool.
If you know the IP address of the reader, use the Add Device option.
If you do not know the IP address, use the Force Network Settings
options. Either method should allow the DataMan 200 reader to appear
in the list of Network devices so that you can connect to it through the
Setup Tool and your Ethernet connection.
DataMan 200 Imager Specications
Specication DataMan 200 Imager
Image Sensor 1/3 inch CMOS
Image Sensor
Properties 4.51mm x 2.88mm (W x H), 6.0μm square pixels
Image Resolution
(Pixels) 752 x 480
14 DataMan 200 Quick Reference Guide DataMan 200 Quick Reference Guide 15
Start the Setup Tool
Connect to Reader
Establish a connection to the reader
Results Display
View results
Light and Camera Settings
Choose a trigger type and other acquisition
parameters
System Settings
Congure input and output signals
Trigger button Latest image Context based help
Read history Train status Connection status
Connect the reader to the Setup Tool to
congure it with the type of symbologies
it will decode as well as other parameters,
such as the type of trigger it will use and the
format of the results it will generate.
Region of interest
In1 button
16 DataMan 200 Quick Reference Guide DataMan 200 Quick Reference Guide 17
Use the Setup Tool Menu Bar
File Menu
Open Conguration Open a saved .cfg conguration le.
Save Conguration Create a .cfg conguration le of current runtime
parameters.
Print Conguration Code Generate a programming codes sheet representing your
reader’s conguration.
Restore Device Load a saved device conguration .cdc le, with run-
time parameters plus device-specic information for a
particular DataMan 200.
Backup Device Create a device conguration .cdc le for a specic
reader.
System Menu
Save Settings Save the current parameters to non-volatile
memory, which allows the reader to restore these
settings each time you reboot it.
Reset Conguration Reset all conguration parameters in RAM (volatile
memory) to the default settings.
Update Firmware Update the reader software.
Upload Feature Key Unlock additional features available in the reader
software if you have the right key.
VeriCode License Add VeriCode decoding by entering a license
string provided by Veritek. Ask your Cognex sales
representative for details.
The In1 button on the toolbar creates a virtual rising edge signal on Input 1. Use the In1
button to train a code, optimize brightness or set a match string without a physical input 1
channel.
Each reader can store its current set of runtime parameters to a conguration (.cfg) le,
which contains information such as the enabled symbologies and how any output data
should be formatted.
The same conguration le can be loaded onto multiple readers, as the le does not
contain identication information such as the IP address or device name of the reader
used to create it.
A reader can also generate a Cognex device conguration (.cdc) le, which stores the set
of runtime parameters plus any identication data, such as the name of the device, its IP
address, subnet mask, and so on. Cognex recommends generating a device conguration
le for each reader to allow you to restore a reader to its operating state with minimal
effort.
Use the File menu of the Setup Tool to manage .cfg and .cdc les:
Load Image Load an 8-bit uncompressed grey-scale .bmp or
.jpg image for analysis.
Save Image Save the latest acquired image with the .jpg or
.bmp le format.
Save Burst Images Save the latest batch of burst images.
Use the Edit menu for standard Cut, Copy and Paste operations.
Use the View menu to view reader information (serial number, rmware version,
and so on) and to enable and disable various elements of the Setup Tool, and the
Tasks menu to switch between various Setup Tool options.
Use the System menu to manage the current settings on the reader and to
upgrade the features it currently supports:
Use the Help menu to display Setup Tool version information.
18 DataMan 200 Quick Reference Guide DataMan 200 Quick Reference Guide 19
DataMan 200 Triggering Trigger Modes
Trigger the reader using any of the following methods:
• Press the trigger button on the reader.
• Send a pulse on the I/O cable:
Trigger + (blue), Trigger - (black)
• Send a trigger command over the RS-
232 connection or Ethernet connection.
• Click the Trigger button in the Setup
Tool:
• Press <CTRL>-T on the keyboard.
DataMan supports a variety of trigger modes:
• Single: Acquires a single image and attempts to decode any symbol
it contains, or more than one symbol in cases where multicode is
enabled. The reader relies on an external trigger source.
• Presentation: Repeatedly scans for a symbol and decodes it
whenever one is detected. The reader relies on an internal timing
mechanism to acquire images.
• Manual (default): Begins acquiring images when you press the
trigger button on the reader, and continues acquiring images until a
symbol is found and decoded or you release the button.
• Burst: Performs multiple image acquisitions based on an external
trigger and decodes any symbol appearing in a single image or
within a sequence of images, or multiple symbols in a single image
or within a sequence of images when multicode is enabled. You can
control the number of images within each burst and the interval
between image acquisitions.
• Self: Similar to Presentation mode in that the reader perpetually
scans for symbols and decodes them each time one is detected.
Unlike Presentation mode, however, Self mode supports multicode
results and a decode attempt occurs with every image.
• Continuous: Begins acquiring images based on a single external
trigger and continues to acquire images until a symbol is found
and decoded, or until multiple images containing as many codes
as specied in multicode mode are located, or until the trigger is
released.
Andere Handbücher für DataMan 200
1
Inhaltsverzeichnis
Andere Cognex Barcode-Lesegerät Handbücher
Cognex
Cognex DM503 Bedienungsanleitung
Cognex
Cognex DataMan 300 Series Bedienungsanleitung
Cognex
Cognex MX-1000 Bedienungsanleitung
Cognex
Cognex DataMan DM474 Bedienungsanleitung
Cognex
Cognex DataMan 470 Series Bedienungsanleitung
Cognex
Cognex DataMan 260 Series Bedienungsanleitung
Cognex
Cognex In-Sight SnAPP Series Bedienungsanleitung
Cognex
Cognex DataMan 50 Bedienungsanleitung
Cognex
Cognex DataMan 300 Series Bedienungsanleitung
Cognex
Cognex DataMan 302L Bedienungsanleitung
Cognex
Cognex DataMan 60 Series Bedienungsanleitung
Cognex
Cognex DataMan 380 Series Bedienungsanleitung
Cognex
Cognex DataMan 9500 Bedienungsanleitung
Cognex
Cognex VisionPro Trevista CI Dome Bedienungsanleitung
Cognex
Cognex DataMan 300 Series Bedienungsanleitung
Cognex
Cognex DataMan 8072 Bedienungsanleitung
Cognex
Cognex DataMan 50 Bedienungsanleitung
Cognex
Cognex DataMan 50 Series Bedienungsanleitung
Cognex
Cognex DataMan 475 Verifier Bedienungsanleitung
Cognex
Cognex DataMan 360 Series Bedienungsanleitung
Beliebte Barcode-Lesegerät Handbücher anderer Marken
POSMicro
POSMicro Datalogic PowerScan D7100 Bedienungsanleitung
Marson
Marson MT780 Kurzanleitung zur Einrichtung
NCR
NCR RealPOS Bedienungsanleitung
Motorola
Motorola SE3300 Kurzanleitung zur Einrichtung
Element
Element P130BT Bedienungsanleitung
Motorola
Motorola Symbol LS3008 Installations- und Betriebshandbuch
