Cognex DataMan 50 Bedienungsanleitung

DataMan®50

Quick Reference Guide

2021 November 25

Revision: 6.1.11.1

Precautions

To reduce the risk of injury or equipment damage, observe the following precautions

when you install the Cognex product:

lRoute cables and wires away from high-current wiring or high-voltage

power sources to reduce the risk of damage or malfunction from the

following causes: over-voltage, line noise, electrostatic discharge (ESD),

power surges, or other irregularities in the power supply.

lChanges or modifications not expressly approved by the party responsible

for regulatory compliance could void the user’s authority to operate the

equipment.

lEnsure that the cable bend radius begins at least six inches from the

connector. Cable shielding can be degraded or cables can be damaged or

wear out faster if a service loop or bend radius is tighter than 10X the cable

diameter.

lThisdevice should be used in accordance with the instructions in this

manual.

lAll specifications are for reference purposes only and can change without

notice.

lThis product is intended for industrial use in automated manufacturing or

similar applications.

lThe safety of any system incorporating this product is the responsibility of

the assembler of the system.

lThisproduct does not contain user-serviceable parts. Do not make

electrical or mechanical modifications to product components.

Unauthorized modifications can void your warranty.

Symbols

The following symbols indicate safety precautions and supplemental information:

WARNING:This symbol indicates a hazard that could cause death, serious personal injury or electrical

shock.

CAUTION:This symbol indicates a hazard that could result in property damage.

Note: This symbol indicates additional information about a subject.

Tip: This symbol indicates suggestions and shortcuts that might not otherwise be apparent.

Product Overview

1 Status LEDs:

- YELLOW

- GREEN

- RED

2 Cable

3Internal illumination

43-position M12 lens

5 LED aimer

6 Mounting holes (M3 x 3.5 mm)

1 Remove side cover to access square nut (M3)

2 Yellow arrow indicates selected focus position

3 Hidden square nut as an alternative mounting option

DataMan 50 Accessories

CABLES

USB Cable, 1.5 m (DM100-USB-000),

USB Cable, 3 m (DM100-USB-030)

USB and Flying Leads I/O Cable, 2.0 m (DM-USBIO-00)

RS-232 and Flying Leads I/O Cable, 2.5 m (DM-RS232IO-00)

RS-232 Cable, 1.5 m (DM100-RS232-000),

Extension Cable, 5 m (DM100-EXTCBL-000)

Flying Leads Connection Cable, 5 m (DM50-PWRIO-05)

RS-232/USB adapter connector (DM100-PATCH-000)

LENS COVERS

Clear Front Cover (DM-50-CLCOV)

ESD-safe Front Cover (DM50-CLCOV-ESD)

OTHER

Power Supply, 6 V (DM100-PWR-000)

Pivot Mounting Bracket (DM100-PIVOTM-00)

Universal Mounting Bracket (DM50-UBRK-000)

Control Box (DM-CTRLBOX-00)

Dimensions

Field of View and Reading Distances

Focus position Distances in mm/2D min. code Distances in mm/1D min. code

45 mm 33-51 6 MIL 34-51 4 MIL

31-57 8 MIL 30-56 6 MIL

27-60 10 MIL 37-66 10 MIL

25-61 12 MIL

70 mm 44-74 6 MIL 52-73 4 MIL

42-78 8 MIL 45-83 6 MIL

39-80 10 MIL 33-89 10 MIL

34-89 12 MIL

110 mm 58-121 10 MIL 66-122 6 MIL

54-133 12 MIL 50-141 10 MIL

58-168 15 MIL

Connecting the Reader

Perform the following steps:

1. Connect the breakout cable.

2. Connect the reader to the PC.

For information on the pinout and the wire colors, see section Connections, Optics

and Lighting in the DataMan 50 Reference Manual.

Andere Handbücher für DataMan 50

Inhaltsverzeichnis

Andere Cognex Barcode-Lesegerät Handbücher

Cognex

Cognex DataMan 370 Series Betriebsanleitung

Cognex

Cognex DataMan 8700 Bedienungsanleitung

Cognex

Cognex DM260Q Bedienungsanleitung

Cognex

Cognex DataMan 8072 DL Bedienungsanleitung

Cognex

Cognex DataMan 260 Bedienungsanleitung

Cognex

Cognex DataMan 475 Verifier Bedienungsanleitung

Cognex

Cognex DataMan 503 Bedienungsanleitung

Cognex

Cognex DataMan 370 Series Bedienungsanleitung

Cognex

Cognex DataMan 50 Bedienungsanleitung

Cognex

Cognex DataMan 470 Series Bedienungsanleitung

Cognex

Cognex DataMan 280 Series Bedienungsanleitung

Cognex

Cognex DataMan 8600 Verifier Series Bedienungsanleitung

Cognex

Cognex DataMan 300 Series Bedienungsanleitung

Cognex

Cognex DataMan 50 Bedienungsanleitung

Cognex

Cognex DataMan 503 Bedienungsanleitung

Cognex

Cognex DataMan 150 Series Bedienungsanleitung

Cognex

Cognex DataMan 260 Series Bedienungsanleitung

Cognex

Cognex DataMan 150 Bedienungsanleitung

Cognex

Cognex DataMan 280 Series Bedienungsanleitung

Cognex

Cognex DataMan 8072 Verifier Bedienungsanleitung

Cognex

Cognex DataMan 8000 Series Bedienungsanleitung

Cognex

Cognex In-Sight 2800 Series Bedienungsanleitung

Cognex

Cognex DataMan 300 Series Bedienungsanleitung

Cognex

Cognex DataMan 8072 DL Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung