Commell FE-97G Bedienungsanleitung
FE-97G
Full-size PICMG CPU Card
User’s Manual
Edition 1.1
2012/10/22
FE-97G User’s Manual
-1-
Copyright
Copyright 2010, all rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice
to make improvements to the products.
This document contains proprietary information and protected by copyright. No part
of this document may be reproduced, copied, or translated in any form or any means
without prior written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property
of their respective owners. Disclaimer
The company shall not be liable for any incidental or consequential damages
resulting from the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including
without limitation implied warranties of merchantability or fitness for a particular
purpose.
The company has the right to revise the manual or include changes in the
specifications of the product described within it at any time without notice and
without obligation to notify any person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT
FE-97G User’s Manual
-2-
Packing List:
Please check the package content before you starting using the board.
Hardware:
FE-97G Full-size PICMG CPU Card x 1
Cable Kit:
SATA Cable x 2
DVI module with DVI Cable x 1
(FE-97GTXDG & FE-97GTXDG2)
FDD cable x 1
PS/2 Keyboard & Mouse Cable x 1
Audio Port Cable x 1
USB Cable x 2
40-pin ATA100 IDE cable x 1
ATX cable x 1
FE-97G User’s Manual
-3-
COM & Printer cable x 1
(FE-97GTXG & FE-97GTXDG)
Com Cable x 1
(FE-97GTXG2 & FE-97GTXDG2)
Printer cable x 1
(FE-97GTXG2 & FE-97GTXDG2)
HDTV Port Cable x 1 (Optional)
Printed Matters:
Driver CD x 1 (including User’s Manual)
FE-97G User’s Manual
-4-
Index
Chapter 1 <Introduction>................................................................7
1.1 <Product Overview>.............................................................7
1.2 <Product Specification> .......................................................9
1.3 <Mechanical Drawing>......................................................12
1.4 <Block Diagram> ...............................................................13
Chapter 2 <Hardware Setup>....................................................14
2.1 <Connector Location>........................................................14
2.2 <Connector Reference>......................................................15
2.2.1 <Internal Connectors>.....................................................15
2.2.2 <External Connectors>....................................................15
2.3 <Jumper Location & Reference>........................................16
2.4 < Memory Setup >..................................................................17
2.5 <CMOS Setup> ..................................................................18
2.6 <Enhanced IDE & CF Interface>.......................................19
2.7 <Serial ATAInterface> .......................................................20
2.8 <Ethernet Interface>...........................................................21
2.9 <Onboard Display Interface>.............................................22
2.9.1 <Analog VGA Interface>.................................................22
2.9.2 <Digital Display>...........................................................23
2.9.3 <HDTV Interface> .........................................................27
2.9.4 <DVI Interface >............................................................28
2.10 <Integrated Audio Interface>............................................29
2.11 <GPIO Interface> .............................................................31
2.12 <Power and Fan Installation>...........................................32
2.12.1 <Power connectors>......................................................32
2.12.2 <Fan Connectors> ........................................................32
2.12.3 <ATX Power Mode>.....................................................34
2.13 <Switch and Indicator>.....................................................35
FE-97G User’s Manual
-5-
Chapter 3 <System Setup>.........................................................36
3.1 <Audio Configuration> ......................................................36
3.2 <Video Memory Setup> .....................................................37
3.3 <Display Properties Setting>..............................................38
Chapter 4 <BIOS Setup>...............................................................40
Appendix A <I/O Port Pin Assignment>..........................42
A.1 <Serial ATAPort>..............................................................42
A.2 <IrDA Port>.......................................................................42
A.3 <SMBUS Port>..................................................................43
A.4 <Serial Port 2>...................................................................43
A.5 < RS-232, RS-422, RS-485 & IrDA >...............................44
A.6 <Parallel Port>...................................................................45
A.7 <LAN Port>.......................................................................45
A.8 <USB Interface>................................................................45
A.9 <DVI Port>........................................................................46
A.10 <PS/2 Keyboard & Mouse Port>.....................................46
Appendix B <Flash BIOS>...........................................................47
B.1 <Flash Tool> ......................................................................47
B.2 <Flash BIOS Procedure>...................................................47
Appendix C <System Resources>.......................................48
C.1 <Direct Memory Access (DMA)>.....................................48
C.2 <Direct Memory Access (IRQ)> .......................................48
C.3 <Input /Output (IO)>..........................................................49
C.4 <Memory Address Map>...................................................51
Appendix D <Programming GPIO’s>.................................52
Appendix E <Programming Watchdog Timer>........53
Contact Information...........................................................................54
FE-97G User’s Manual
-6-
(This page is left for blank)
FE-97G User’s Manual
-7-
Chapter 1 <Introduction>
1.1 <Product Overview>
FE-97G is the Full-size PICMG 1.0 CPU Card, with Intel® Atom N270 processor for
533 MHz front side bus, Intel® 945GSE and ICH7M chipset, integrated GMA950
graphics, DDR2 SO-DIMM memory, Realtek AC97 Audio, Serial ATA and two Intel®
82574L Gigabit LAN.
Intel Atom Processor
The Intel® Atom N270 single core processor is with 533 MHz front side bus, 512KB
L2 cache. It's built on 45nm process technology support Hyper-Threading
Technology, Enhanced Intel SpeedStep® Technology reduces average system
power consumption.
Mobile Intel® 945GSE chipset
The board integrates Intel® 945GSE and ICH7M chipset. The chipset features
power-efficient graphics with an integrated 32-bit 3D graphics engine based on
Intel® Graphics Media Accelerator 950 architecture with LVDS, CRT, and
TV-Out display ports. It provides I/O capabilities and flexibility via high-bandwidth
interfaces such as PCI, Serial ATA and Hi-Speed USB 2.0 connectivity. It also
includes a single channel for 400/533 MHz DDR2 system memory (SODIMM), HD
Audio with 7.1channels surrounding sound.
All in One multimedia solution
Based on Intel 945GSE and ICH8M chipset, the board provides high performance
onboard graphics, 18-bit Dual channel LVDS interface, HDTV and 2 channels ac97
Audio, to meet the every requirement of the multimedia application
FE-97G User’s Manual
-8-
Flexible Extension Interface
The board provides two PCI Express mini card, one mini-PCI socket and one CF
socket.
FE-97G User’s Manual
-9-
1.2 <Product Specification>
General Specification
Form Factor Full-size PICMG CPU Card
PICMG version 1.0 (Rev. 2.0), PCI version 2.0 compliant
CPU Intel® Atom N270 processor
Package type: FCBGA8
Front side bus: 533MHz
Memory 1 x 200-pin DDR2 SO-DIMM SDRAM up to 2GB
Unbufferred, none-ECC memory supported only
Chipset Intel® 945GSE and ICH7M
BIOS Phoenix-Award v6.00PG 8Mb SPI flash BIOS
Green
Function Power saving mode includes doze, standby and suspend modes.
ACPI version 2.0 and APM version 1.2 compliant
Watchdog
Timer System reset programmable watchdog timer with 1 ~ 255
sec./min. of timeout value
Real Time
Clock Chipset integrated RTC with onboard lithium battery
IDE UltraATA133 IDE interface supports up to 2 ATAPI devices
One 44-pin IDE port onboard
One CompactFlash Type II socket
Serial ATA Intel® ICH7M integrates 2 Serial ATA interfaces
(No RAID Function) Up to 150MB/s of transfer rate
Multi-I/O Port
Chipset Intel® ICH7M with Winbond® W83627DHG-P controller
Serial Port Five RS232 and one jumper selectable RS232/422/485
Parallel Port One internal bi-direction parallel port with SPP/ECP/EPP mode
Floppy Port One internal Floppy port
USB Port 6 x Hi-Speed USB 2.0 ports with 480Mbps of transfer rate
IrDA Port One IrDA compliant Infrared interface supports SIR
K/B & Mouse PS/2 keyboard and mouse port on bracket
GPIO One 12-pin Digital I/O connector with 8-bit programmable
VGA Display Interface
Chipset Intel® 945GSE GMCH (Graphic Memory Controller Hub)
Memory Up to 224MB shared with system memory
Display Type CRT, LCD monitor with analog display, DVI, HDTV
Connector External DB15 female connector
Onboard 40-Pin LVDS connector (FE-97GTXDG/TXDG2)
Onboard 26-Pin DVI connector (FE-97GTXDG/TXDG2)
Onboard 9-Pin TV-out connector
Andere Handbücher für FE-97G
1
Inhaltsverzeichnis
Andere Commell Hauptplatine Handbücher
Commell
Commell LS-37L Bedienungsanleitung
Commell
Commell LV670 Series Bedienungsanleitung
Commell
Commell LE-370 Bedienungsanleitung
Commell
Commell LE-37A Bedienungsanleitung
Commell
Commell FS-A71 Bedienungsanleitung
Commell
Commell P3SAE Series Bedienungsanleitung
Commell
Commell LE-575 Bedienungsanleitung
Commell
Commell LE-37R Bedienungsanleitung
Commell
Commell LV-67S Bedienungsanleitung
Commell
Commell LV-67D Bedienungsanleitung
Commell
Commell LV-67P Bedienungsanleitung
Commell
Commell LV-67Z7 Bedienungsanleitung
Commell
Commell FS-A70 Bedienungsanleitung
Commell
Commell FS-977 Bedienungsanleitung
Commell
Commell LS-37B Bedienungsanleitung
Commell
Commell LV-602 Bedienungsanleitung
Commell
Commell LE-37M Bedienungsanleitung
Commell
Commell LE-37G Bedienungsanleitung
Commell
Commell LP-170 Bedienungsanleitung
Commell
Commell HS-770 Bedienungsanleitung
Beliebte Hauptplatine Handbücher anderer Marken
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Bedienungsanleitung
Gigabyte
Gigabyte GA-9IVDT Bedienungsanleitung
Texas Instruments
Texas Instruments ADS8372EVM Bedienungsanleitung
IBT Technologies
IBT Technologies MB860 Bedienungsanleitung
Nvidia
Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung
Biostar
Biostar M7VIT Bravo Bedienungs- und Montageanleitung
