CommScope FIST-RSKG-1 Bedienungsanleitung

Contents

1 General

2 Kit contents

3 Installation

3.1 General

3.2 FIST-GCO2-BX

3.3 FIST-GCO2-FX

1 General

This kit is used to install 1 drop cable of 11 to 14 mm diameter in a

new unused round port of the FIST-GCO2-BX and FX.

Comment: depending on outside conditions, some oil bleed-out may

occur. This will not affect in any way the sealing performance.

FIST-RSKG-1

INSTALLATION INSTRUCTION

Gel seal for the round cable ports of FIST-GCO2-BX and FX

splice closure

2 Kit contents

Kit content FIST-GCO2-BX6

Kit content FIST-GCO2-FX/BX8

Note: The lubrication oil in the kit makes it easier to

- install gel-seal in the closure ports

- guide cables through ports in the gel-seal.

Overview of the available types of gel seals.

3.1.1 Before installing the gel seal in the port, install the 2 securing

screws.

3 Installation

3.1 General

Thermoplastic gel seals

Number of ports Cable range (mm)

1 11-14

2 8-11

3 6,5-8

4 4-7

8 3-5

16 0-3

FOSC-OSKG 6-15

FIST-OSKG 5-18

FIST-OSKG20 16-20

TC-907-IP

Rev C, November 2018

www.commscope.com

CX5496-000

Rev D

3.2 Cable securing in the FIST-GCO2-BX6

3.2.3 Engage the seal mechanism by tightening the ‘nut’ of the central

bolt assembly until the spring is no longer visible and the ‘nut’ is ﬂush

with the gland body.

3.2.1 Prepare the cable as per standard practice. Cut the strength

member at ± 50 mm from the cable jacket. Feed the cable through the

gel seal (apply some tape at the end of the loose tubes to ensure easy

feeding through the gel seal).

3.2.2. Secure the metal bracket together with the 2 metal plates to the

frame. Make sure that it is positioned at the center of the port. Do not

tighten the screw completely. Secure the cable jacket with the hose

clamp at the T-shape. Secure the strength member between the 2 metal

plates and tighten the screw. Route the loose tubes as per standard

practice.

3.1.2 Open the port. The cutting wire can be used. Make sure that

the edges are free of burrs. Install the seal in the port, mark line always

facing forward. The mark line on the gel seal should match with the

mark line on the FIST-GCO2-FX drop port (The mark at the FIST-GCO2-

FX should be hidden when the seal is installed). Tighten the 2 screws

and make sure they grip in the port.

FIST-GCO2-BX

FIST-GCO2-FX

A Optional: FIST-GCO2-BX6-EXT/CF

GCO2-BX cable securing frame.

A1 A cable securing frame can be mounted onto the mobra (bolt

and nut). This allows cables to be secured outside the closure.

A2 Apply some foam to the cable(s) and secure with tie-wrap(s) to

the frame.

3.3 Cable securing in the FIST-GCO2-FX/BX8

Start with port 3 and 8.

3.3.1 Prepare the cable as per standard practice. Cut the strength

member at ± 40 mm from the cable jacket. Feed the cable through the

gel seal. (Apply some tape at the end of the loose tubes to ensure easy

feeding through the gel seal).

3.3.2 Secure the metal bracket to the frame (bottom hole) with the

screw (M5). Secure the cable jacket with the hose clamp at the T-shape.

If needed use some tape or foam to build up the diameter. Secure the

strength member between the metal plate and bracket and tighten the

screw. Route the loose tubes as per standard practice.

3.2.3 Engage the seal mechanism by tightening the ‘nut’ of the central

bolt assembly until the spring is no longer visible and the ‘nut’ is ﬂush

with the gland body.

B Optional: FIST-GCO2-FX-EXT/CF

FIST-GCO2-FX cable securing frame

B1 A cable securing frame can be mounted onto the base of

the FIST-GCO2-FX with 2 delivered screws. This allows cables to be

secured outside the closure. The marks ‘4’ and ‘7’ must be nearest to

the corresponding ports.

C Optional: FIST-GCO2-BX8

FIST-GCO2-BX8 cable securing frame

C1 A cable securing system can be mounted on to the base of

the FIST-GCO2-BX8 with 4 screws. This allows cables to be secured

outside the closure.

C2 Apply some foam to the cable(s) and secure with tie-wrap(s) to

the frame.

Visit our website or contact your local CommScope ® representative for more information. www.commscope.com

This product may be covered by one or more U.S. patents or their foreign equivalents. For patents, see www.cs-pat.com

For technical assistance, customer service, or to report any missing/damaged parts, visit us at: http://www.commscope.com/SupportCenter

Andere CommScope Kabel und Steckverbinder Handbücher

CommScope

CommScope FOSC-OC-3 Bedienungsanleitung

CommScope

CommScope ION-M7P Bedienungsanleitung

CommScope

CommScope SYSTIMAX 360 760150144 Bedienungsanleitung

CommScope

CommScope FIST-RSKG-16 Bedienungsanleitung

CommScope

CommScope HELIAX FiberFeed HFT1206-24S49 Series Merkblatt

CommScope

CommScope OFDC-A4 SPLICE/PATCH Bedienungsanleitung

CommScope

CommScope HELIAX MFJS6UDHNA00 Bedienungsanleitung

CommScope

CommScope BUDI-S Bedienungsanleitung

CommScope

CommScope LSX-288 Bedienungsanleitung

CommScope

CommScope AMP NETCONNECT MRJ21 1479452-1 Bedienungsanleitung

CommScope

CommScope FOSC-350C Bedienungsanleitung

CommScope

CommScope SYSTIMAX VisiPatch CPC5562 Bedienungsanleitung

CommScope

CommScope HELIAX FiberFeed HFE810 Series Merkblatt

CommScope

CommScope NOVUX SEC 100 Bedienungsanleitung

CommScope

CommScope M2400 Series Bedienungsanleitung

CommScope

CommScope NOVUX SXT Bedienungsanleitung

CommScope

CommScope FOSC-450D Bedienungsanleitung

CommScope

CommScope AMP NETCONNECT 1711357-1 Bedienungsanleitung

CommScope

CommScope FIBER INDEXING TERMINAL Bedienungsanleitung

CommScope

CommScope FOSC 450 A Bedienungsanleitung

CommScope

CommScope LightCrimp Plus ST Bedienungsanleitung

CommScope

CommScope LightCrimp Plus LC Bedienungsanleitung

CommScope

CommScope FOSC450 C Bedienungsanleitung

CommScope

CommScope HELIAX FiberFeed HFA208 Series Merkblatt

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung