COP Security INS-RED04 Kurzanleitung

COP Security, Delph New Road,

Dobcross, OL3 5BG England

DVR RANGE

ENGINEER MaNual

INSPIRE

Red

Engineer Manual

INS-RED04 INS-RED08 INS-RED16

Hardware Recording Settings

•Inspire Red DVR range

•Connections

•Connecting a mouse

•Connecting keyboard

•Connecting PTZ cameras

•Connecting Keyboard/PTZ

•Alarm connections

•Using front panel

•Using infra red remote

•Using a mouse

•Using a remote keypad

•Power up

•Power down

•Normal record settings

•Event record settings

•Record time calculator

•Disable/Enable recording

•Recorded audio options

•Audio CH multi screen

•Record OSD options

•Record schedule

•Pre event recording

•Post event recording

•Watermark

•Video loss recording

Quick Setup Network Settings

•Entering engineer menu

•Exit engineer menu

•Basic default settings

•Network basic setup

•iPhone viewing setup

•Smartphone setup

•Network type

•Network details

•Email settings

•PPPOE settings

•DDNS settings

•Dual stream settings

•Internet time synchronisation

System Settings Event settings

•Language

•Set time & date

•Daylight saving time

•Video standard

•Set VGA resolution

•Key press buzzer

•HDD overwrite

•Add user

•Change user access rights

•Remove user

•Change password

•Information screen settings

•DVR ID

•DVR Name

•Alarm input type

•Alarm output duration

•Alarm actions

•Full screen on alarm

•Motion detect setup

•Motion detect output duration

•Motion detect actions

•Full screen on motion detect

•Video loss actions

•HDD full actions

•HDD error actions

Display Settings Maintenance

•Channel name display options

•Hide camera

•Display colour setting

•Spot monitor setting

•Mask setting

•PTZ setup

•VGA monitor settings

•BNC monitor settings

•Time and date OSD option

•Display size adjustment

•Time & date display position

•Show record status

•Connected camera number

•View log

•Copy log

•Format HDD

•Software upgrade

•Copy engineer settings to USB

•Load engineer settings from USB

•Load default settings

•DVR configuration information

100

101

Contents

Engineer Manual

INS-RED04 INS-RED08 INS-RED16

There are three products in the range

INS-RED04

4 channel with CD-DVD & USB backup and maximum of 6000GB HDD

INS-RED08

8 channel with CD-DVD & USB backup and maximum of 12000GB HDD.

INS-RED16

16 channel with CD-DVD & USB backup and maximum of 12000GB HDD.

Inspire Red DVR Range

Engineer Manual

INS-RED04 INS-RED08 INS-RED16

The connection details are common for all types of Inspire Red DVR.

INS-RED04, INS-RED08 & INS-RED16

A. Camera inputs (BNC)

B. Loop through (BNC)

C. USB port

D. TV output (BNC)

E. Spot monitor output (BNC)

F. Audio inputs

G. RS232 port

H. VGA output

I. Audio input (Talkback - RCA)

J. Audio output (RCA)

K. Ethernet network port

L. RS422 connections

M. RS485 connections

N. Alarm input/output

O. 12v DC Output (1A max)

P. 5v DC Output (1A max)

Connections

Engineer Manual

INS-RED04 INS-RED08 INS-RED16

A mouse is supplied with the Inspire DVR that can be connected to any available USB

port on the DVR.

There are 2x USB ports on each Inspire Red DVR, the first is located on the

front panel and the second is located on the back of the DVR.

The mouse is automatically detected when it is plugged in, it does not have to be

plugged in during DVR start up.

If the mouse is unplugged the mouse pointer will disappear after 30 seconds.

Connecting A Mouse

Engineer Manual

INS-RED04 INS-RED08 INS-RED16

Remote keyboards are connected to the RS485 bus, there are two RS485 busses on the

DVR. One is for a remote keyboard connection and the other is for connecting to PTZ

cameras. Each RS485 bus is independent.

Recommended cable is Cat 5.

Maximum cable run is recommended at 500 metres.

More than one DVR can be connected and controlled by a single keyboard. However

each DVR must have a separate ID or the keyboard will try to control multiple DVRs at

the same time.

See page 37 for DVR ID setting.

Keyboard Setting

The keyboard must be set to Pelco D 2400 baud rate for it to communicate with the

DVR.

Set the DIP switch on the keyboard

DVR Setting

There are no settings to adjust on the DVR, the DVR will automatically operate at Pelco

D 2400 for keyboard communication.

For multiple DVR configurations you need to set the DVR ID, see page 37 for details.

Connecting Remote Keyboard

Engineer Manual

INS-RED04 INS-RED08 INS-RED16

PTZ cameras are connected to the RS485 bus, there are two RS485 busses on the DVR.

One is for a remote keyboard connection and the other is for connecting to PTZ

cameras. Each RS485 bus is independent.

RS485

Recommended cable is Cat 5.

Maximum cable run is recommended at 500 metres.

PTZ Camera Setting

The PTZ cameras must be set to operate on the same communication protocol as the

DVR is set to (Recommended protocol is Pelco D 2400).

Each PTZ camera must be set with an individual ID number.

See PTZ camera instructions for details on changing these settings.

DVR Setting

The settings for the communication protocol must be set to match the PTZ camera, see

page 45 for details of setting the DVR for PTZ use.

Connecting PTZ Cameras

Engineer Manual

INS-RED04 INS-RED08 INS-RED16

If you want to control PTZ cameras & speed domes from both the DVR and the

keyboard then both RS485 busses must be connected together.

RS485 RS485

Recommended cable is Cat 5.

Maximum cable run is recommended at 500 metres for each device.

Keyboard Setting

The keyboard must be set to Pelco D 2400 baud rate for it to communicate with the

DVR.

Set the DIP switch on the keyboard.

PTZ Camera Setting

The PTZ cameras must be set to Pelco D 2400.

Each PTZ camera must be set with an individual ID number.

See PTZ camera instructions for details on changing these settings.

DVR Setting

The DVR will automatically work on Pelco D 2400 for keyboard communication.

For multiple DVR configurations you need to set the DVR ID, see page 37 for details.

The settings for the PTZ communication protocol must match PTZ camera setting.

See page 45 for details of setting the DVR for PTZ use.

Connecting Keyboard and PTZ

Engineer Manual

INS-RED04 INS-RED08 INS-RED16

Alarm inputs can be set for normally open or normally closed, the default setting is

normally open. See page 82 for details on how to change the setting.

There is a single alarm input for each video channel, and multiple ground connectors on

each DVR.

Alarm inputs are activated in the following way:

Normally Open Connect to ground to activate

Normally Closed Remove connection from ground to activate

Connecting Alarm Outputs

There are four independent relay outputs.

The relays are voltage free contacts rated at 1A 12v and are normally open closing on

activation.

The relays can be programmed to respond to different types of event, see Event

Settings from page 82 - 92 for details on setting the alarm outputs.

Alarm Connections

Normally Open Normally Closed

4 Alarm Outputs

Engineer Manual

INS-RED04 INS-RED08 INS-RED16

The front panel functions are common for all types of Inspire Red DVR.

INS-RED04, INS-RED08 & INS-RED16

A. Navigation buttons Move around menu screen, control PTZ cameras

B. OK button Confirm and accept options

C. Power button Switch on / off DVR (requires password)

D. Play & pause button Playback and pause recorded video

E. Menu button Access engineer menu (requires password)

F. PTZ button Enable / disable PTZ mode

G. Copy button Access the copy menu

H. Display button Change the format of the main display

I. Back button Go back one step in menu or stop playback

J. Mute button Mute / enable audio & mute alarm

K. Info button Display installer information

L. Number buttons Select individual channels

M. Information lights Display status of HDD, Network, Event

N. USB port Mouse or copy device(plus versions only)

O. CD-DVD eject Open CD-DVD tray (plus versions only)

Using Front Panel

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere COP Security DVR Handbücher

COP Security

COP Security DVR04SHD Bedienungsanleitung

COP Security

COP Security 325HR Bedienungsanleitung

COP Security

COP Security inspire black 960h Bedienungsanleitung

COP Security

COP Security 15-WP16-USB Bedienungsanleitung

COP Security

COP Security 15-VT04-CDRW Bedienungsanleitung

COP Security

COP Security Inspire Blue V2 Bedienungsanleitung

COP Security

COP Security INSPIRE Bedienungsanleitung

COP Security

COP Security XT Series Bedienungsanleitung

COP Security

COP Security 15-DVR4RT-120-CDRW Kurzanleitung

COP Security

COP Security 15-DVR04 Bedienungsanleitung

COP Security

COP Security INSPIRE WHITE series Bedienungsanleitung

COP Security

COP Security 15-DVR16SAE-LAN Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

FSM

FSM Colibri Grande PRO Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung