Craftsman BACKWALL WITH METAL PEGBOARD Bedienungsanleitung

BACKWALL WITH METAL PEGBOARD

CAUTION: Backwall MUST be attached to the Workbench before the

top is attached and the drawers are installed.

CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product.

Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA. F1493

fSAFETY WARNINGS AND CAUTIONS:

Use appropriate safety equipment when using power and hand tools. Failureto do so may cause personal injuryor productdamage.

Use adequate manpower when assembling and moving this unit. Failure to do so may cause personal injuryor productdamage.

DO NOT stand onthis product.You may fall which may cause personal injury.

DO NOT mount this producton a truck bed or any other movingobject.This may cause personal injuryor productdamage.

Appropriatelysecure this product before moving itwith a forklift.

DO NOT tow with power equipment. The productcould tip, which may cause personal injuryor product damage.

DO NOT alter this product inany manner. This may cause productdamage or personal injury.

Keep the producton level surfaces. The product may become unstable and tip ifstored or moved on an un-level surface,which may

cause personal injuryor productdamage.

Be sure the workbench isflat on the floor before installingthe Workbench Backwall. Failure to do so may cause personal injuryor

productdamage.

The maximum weight allowed to hang on or be in any way supported fromthe backwall is65 pounds. Ifthe limit is exceeded the

productmay tip and cause personal injuryor productdamage.

Be sure to secure the Workbench Backwall to a studded or concrete wall. Failure to do so may cause the Workbench Backwall and

Workbench to become unstable and tip. This may cause personal injuryor product damage.

Use only the providedpegboard on Workbench Backwall.

Backwallwith Metal Pegboard is onlyto be attached to one ofthe following Workbenches: 59741, 59742, 59746. Failure to doso

could resultin personal injury or productdamage.

Tools Required:

Socket Wrench

7/16" Socket

Dnll

3/32" DrillBit

1/8" DrillBit

Screwdriver, Phillips

Screwdriver, Flathead

Hardware Included:

_[_ AA (16) _--_) DD (16)

BB (3) _EE (16)

CC (2) FF (2)

GG (1)

(_,all 1-800-4MY-HOME for Service Parts.

(1-800-469-4663) Refer to Service Parts Drawing for full listing of Service Parts._

A(2)

G\\

..... :!:!:i:!::'

\\\\\\,B(2)

C(2)

)

WARNING: Backwallwith Metal Pegboard isonly to be

attached to one of the following Workbenches:

59741, 59742, 59746

NOTE: To assemblethe Backwall,the drawers and top must

first be removed from the workbench.

DRAWER REMOVAL AND INSTALLATION:

FRICTION DRAWERS:

• Emptythe drawer.

•Fullyextend the drawer. Then push it back a fraction of

an inch.

•Insert a screwdriverintothe slot in the slide and

depress the stop untilit clears the lance.

Slot f Stop

Lance

Lubricate

Repeat the procedure for the other slide. Remove the

drawer.

To reinstallthe drawer, prythe stop far enough out to

engage the lance(3/16" to 1/4")and push the drawer

onto the slides untilthe stops pass over the lances.

BALL BEARING DRAWERS:

Empty the drawer.

• Fully extend the drawer.

•Liftthe release lever on the rightside, while depressing

the leveron the leftside and pullthe drawer out to

remove.

Lever

•To reinstall, carefullyalign the slides and slowlypush

the drawer intothe unituntilthe drawer stops.

TOP REMOVAL:

NOTE: When removing top, save the screws to reattach after

backwall isassembled.

Remove and save the screws from the wood top.

Remove top fromworkbench base.

STEP1

AA (2)

DD (2)

EE (2)

Remove and reuse topfastenersinback of

workbench.

Attach A(2).

Fingertighten.

__ Existing

hardware

FRONT

A(2)

STEP2

BB {I)

• Attach B(2) and C(2).

Finger tighten.

Back

/DD EE

Front

Back

Wrench Tighten

fasteners from

step 1

DD (8)

EE (S)

STEP 3

Assemble tray.

Fingertighten.

R, \

AA(2)

BB (2)

DD (2)

EE (2)

]

AA (4)

DD (4)

\\ j

EE (4)

Install tray_

Finger tighten.

Back

Front

NOTE: To reattach the top, new pilot holes willneed to be

marked and drilled.

Back

Reattach top

with existing

hardware

Front

Place top on the bench in the desired location.

• Mark centers ofmounting holesto be drilled.

• Drill 1/8" pilot holes in top.

• Reattach top usingexisting hardware.

•Wrench tighten all fasteners.

STEP 5 Continued

CC (2)

Drill (2) 1/8" pilot holes in top using holes in C(2) as a

template.

Attach using CC(2).

Back

\CC Fmnt

Reinstall drawers.

STEP6

(_._:_ FF (2) GG (1)

Install grommet (GG) indesired location.

Place electrical cord for G through grommet.

Place G against bottom oftray.

Attach using FF(2).

Place elecldcal /

cordthrough

grommet.

hole

_'-MounUng hole

Screws and

washers

supplied

with H

Place H as desired.

Mark centers of4 holes to be drilled.

Drill (4) 3132"pilot holes 1t2" deep.

Attach H using (4) screws and washers provided.

r• Periodicallythe surfaces should be cleaned with amild

detergent and water.

•Auto wax will preserve the unit's luster finish. Apply the

wax as to acar. The wax will also help protect the unit

against scratches.

•Grease and oil can be removed withmost standard

cleaning fluids. For safety, use a nonflammable cleaning

fluid.

MANUAL DE USUARIO

TABLERO METALICO TRASERO

ADVERTENCIA: Asegdrese de colocar el tablero

antes que la tapa y los cajones.

ATENCION: Lea y siga todas las Normas de Seguridad y las Instrucciones de Funcionamiento antes

de utilizar por primera vez este producto.

Sears, Roebuckand Co., Hoffman Estates, IL 60179, USA. F1493

PRECAUCIONES DE SEGURIDAD:

Cuando trabaje con electricidad o herramientas manuales, utiliceun equipo de seguridad adecuado. Una averia puede causar daSos

personales o materiales.

Aseg_rese de utilizarlas herramientas y piezas adecuadas cuando este montando o moviendo el producto. Una averia puede

producirdatlos personales o materiales.

NO se coloque encima del producto. Puede caerse y da_arse.

NO coloque el pmducto ni en una caravana ni en cualquier medio de transporte. Esto podrfa causar daCiospersonales o daflar el

producto.

Antes de movedo con una carretilla elevadora, aseg0rese de colocarlo adecuadamente.

NO Ioarrastre con un equipo el_ctrico. Elproducto puede volcar y causar da_os personales o dafiar el producto.

NO modifique el productode ninguna manera. Esto podrfa causar dar_ospersonales o daflar el producto.

Mantenga el productoen superficiesplanas. El producto puede ser inestable sise coloca o se mueve en una superficieque no sea

plana, Io que podrtacausar dahos personales o daSar el producto.

AsegOrese de que el banco de trabajo este biencolocado en el suelo antes de instalar la parte de atr_s del tablero. Si no Io hace,

puede sufdrdattos personales o dar3arel objeto.

The maximum weight allowed to hang onor be in any way supported from the backwall is 65 pounds. Ifthe limit isexceeded the

product may tipand cause personal injuryor productdamage.

AsegOrese de que el tablero del bancoest_ atornillado a un pilaf o a una pared de camento. Si esto nose realiza adecuadamente, el

tablem trasero o el banco de trabajo puedenser inestables o caerse. Esto pedrla causar dar3ospersonales o dafiar el producto.

$61o utiliceel tablero que viene con el bancode trabajo.

El tablero met_lico trasero s61ose puede colocar en lossiguientes modelos de bancos: 59741, 59742, 59746. De Io contrariopedda

ocasionarse lesiones personales o da_ar el producto.

Herramientas necasarias:

Trinquete

Llave de tubo de 7/16"

Talladro

Brocade 3/32 de pulgada

Brocade 118de pulgada

Destomillador,philips

Destomillador,de cabeza plana

Ferreteria incluida:

BB (3) _ EE (16)

CC(2) !_ FF(2)

GG (1)

(Llame al 1-800-659-7084 para Piezas de $ervicio.

Consulte el dibujode piezas de servicio sidesea un listado completo de piezas de servicio, )

Inhaltsverzeichnis

Sprachen:

Andere Craftsman Zubehör Handbücher

Craftsman

Craftsman 486.24831 Bedienungsanleitung

Craftsman

Craftsman 486.246211 Bedienungsanleitung

Craftsman

Craftsman 358.792403 Bedienungsanleitung

Craftsman

Craftsman 486.24611 Bedienungsanleitung

Craftsman

Craftsman 358.792450 Bedienungsanleitung

Craftsman

Craftsman 358.792443 Bedienungsanleitung

Craftsman

Craftsman 320.16494 Bedienungsanleitung

Craftsman

Craftsman 486.24545 Bedienungsanleitung

Craftsman

Craftsman 240.74295 Bedienungsanleitung

Craftsman

Craftsman 509344 Bedienungsanleitung

Craftsman

Craftsman 486.245452 Bedienungsanleitung

Craftsman

Craftsman 315.22283A Bedienungsanleitung

Craftsman

Craftsman 320.64180 Bedienungsanleitung

Craftsman

Craftsman 509344 Bedienungsanleitung

Craftsman

Craftsman SNOW CAB 486.24276 Bedienungsanleitung

Craftsman

Craftsman 113.29931 Bedienungsanleitung

Craftsman

Craftsman Door Kit Bedienungsanleitung

Craftsman

Craftsman 486.245992 Bedienungsanleitung

Craftsman

Craftsman ROUTER MOUNTING KIT Bedienungsanleitung

Craftsman

Craftsman 358.792442 Bedienungsanleitung

Craftsman

Craftsman 486.24608 Bedienungsanleitung

Craftsman

Craftsman 944.511572 Bedienungsanleitung

Craftsman

Craftsman 572.530331 Bedienungsanleitung

Craftsman

Craftsman 486.24535 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung