Craftsman 486.242411 Bedienungsanleitung

BOX SCRAPER/GRADER BLADE

Model No. 486.242411

Owner's Manual

CAUTION:

Before using this product, read

this manual and follow all Safety

Rules and

Operating Instructions.

• Safety

• Assembly

• Operation

• Maintenance

• Parts

PRINTEDINU.S.A. FORMNO.48339(REV.10/6/08)

Sears,RoebuckandCo.,HoffmanEstates,IL60179U.S.A.

www.sears.com/craftsman

STOP

DO NOT RETURN TO STORE

For Missing Parts or Assembly

Questions Call 1-866-576-8388

TABLE OF CONTENTS

Lookforthissymboltopointoutimportantsafetyprecautions.Itmean--Attention!! Become

alert!! Your safety is involved.

SAFETY

• Readthisownersmanualandyourvehicleandsleeve

hitchownersmanualsbeforeusingthisblade.

• Donotallowchildrentooperatethevehicleorblade.

• Donotallowadultstooperatethevehicleorblade

without proper instructions.

• Donotallowanyonetorideontheblade.

• Beforeloweringandoperatingtheblade,besureno

one is near the area of operation.

• Lowerthebladewhenleavingvehicleunattended.

• Vehiclebrakingandstabilitymaybeaffectedwiththe

attachmentofthisblade.Driveslowlywithbladein

transport position. Stay off of steep slopes.

• Stopandinspectfordamageafterstrikinganobject.

Repairanydamagebeforecontinuingoperation.

• Keepallnutsandboltstightandbesurethe

equipment is in safe operating condition.

• Alwayslockthetractorlifthandledownwheninstalling

orremovingthebladefromsleevehitch.

MODELNUMBER:  486.242411

SERIALNUMBER:  __________________

DATEOFPURCHASE: __________________

Themodelnumberandserialnumberswillbefoundona

decal attached to the frame.

Youshouldrecordboththeserialnumberandthedateof

purchaseandkeepinasafeplaceforfuturereference.

Anypowerequipmentcancauseinjuryifoperatedimproperlyoriftheuserdoesnotunderstandhowtooperatetheequipment.

Exercisecautionatalltimes,whenusingpowerequipment.

MAINTENANCE ..........................................................6

STORAGE ...................................................................6

REPAIRPARTSILLUSTRATION................................ 7

REPAIRPARTSLIST...................................................7

PARTSORDERING/SERVICE .............. REARCOVER

SAFETYRULES..........................................................2

FULLSIZEHARDWARECHART................................ 3

CARTONCONTENTS................................................. 4

ASSEMBLY..................................................................4

OPERATION................................................................ 6

HARDWARE PACKAGE CONTENTS

REF. QTY. DESCRIPTION

A  6 HexBolt,3/8"x2-1/2"

B  4 CarriageBolt,3/8"x1"

C  4 CarriageBolt,5/16"x1"

D  11 Washer,3/8"

E  2 U-Bolt,3/8"

F  14 NylockNut,3/8"

G  4 NylockNut,5/16"

REF. QTY. DESCRIPTION

H  1 PivotLockPin

I  2 ClevisPin

J  1 CotterPin

K  2 HairCotterPin,3/32"

L  1 HairCotterPin,1/8"

M  1 SpecialWasher

ABC E

J K L

SHOWN ACTUAL SIZE

ASSEMBLY

• Assemblebothoftheendplatestothebladeusing

four5/16"x1"carriageboltsand5/16"nylocknuts.

Centerbothplatesoneachendoftheblade.Do not

tighten yet.Seegure1.

FIGURE 1

CARTON CONTENTS

1. Frame(1)

2. Blade(1)

3. Scarier(1)

4. BoxEndPlate(2)

 HardwarePackage(Seepage3)

5. ClevisBracket(1)

6. HitchAssembly(1)

7. PivotAssembly(1)

REMOVAL OF PARTS FROM CARTON

• Removeallpartsandhardwarepackagesfromthe

carton.Layoutallpartsandhardwareandidentify

usingtheillustrationsonpages3and4.

TOOLS REQUIRED FOR ASSEMBLY

(1)1/2"Wrench

(2)9/16"Wrenches

(1)Pliers

FIGURE 2

• Assemblethescarierthroughslotsintheendplates.

Securewithtwo3/8"x3/4"clevispinsandtwo3/32"

hairpincotters(small).Seegure2.

•Tightenthefourboltsassembledingure1.

• Assemblethepivotreinforcementbracketassemblyto

thebladeusingfour3/8"x1"carriageboltsand3/8"

nylocknuts.Tighten. Seegure2.

5/16" x 1"

CARRIAGE BOLT

5/16" NYLOCK NUT

END PLATE

3/32" HAIRPIN

COTTER

3/8" x 3/4"

CLEVIS PIN

SCARIFIER

3/8" x 1"

CARRIAGE BOLT

3/8" NYLOCK NUT

PIVOT REINFORCEMENT

BRACKET ASSEMBLY

• Attachthehitchassemblytotheframeusingve3/8"

x2-1/2"hexbolts,ten3/8"atwashersandve3/8"

nylocknuts.Tighten.Seegure3.

FIGURE 6

FIGURE 5

• Standthebladeintheuprightposition.

• Assembletheframetothebladebyttingtheclevis

bracketdownontothepivotrod.Securetheclevis

brackettothepivotrodwiththespecialwasherand

a3/16"x2"cotterpin.Placethepivotlockpindown

throughtheholesintheclevisbracketandpivotplate.

Securethepivotlockpinwitha1/8"hairpincotter

(large).Seegure6.

FIGURE 4

FIGURE 3

• AssembletwoU-boltsaroundtheframetubeand

throughtheclevisbracket.Assemblefour3/8"nylock

nutsontotheU-bolts.Aligntheclevisbracketsothatit

is straight with the frame and tighten theU-boltsand

thecenterhexbolt.Seegure5.

3/8" x 2-1/2"

HEX BOLT

3/8" FLAT

WASHER

3/8"

NYLOCK

NUT

3/8" FLAT

WASHER

3/8"

NYLOCK

NUT

3/8" FLAT

WASHER

ALIGNING

HOLE

CLEVIS

BRACKET

• Holdtheclevisbracketsothatthealigningholeis

 atthebottom.Inserta3/8"x2-1/2"hexboltthrough

thecenterholeintheclevisbracketandthenthrough

the center hole in the rear of the frame. Secure with a

3/8"atwasherand3/8"nylocknut.Do not tighten

yet.Seegure4.

3/8" NYLOCK NUT

U-BOLT

CLEVIS

BRACKET

SPECIAL

WASHER

3/16" x 2"

COTTER PIN

PIVOT ROD

1/8" HAIRPIN

COTTER

PIVOT LOCK PIN

OPERATION

KNOW YOUR BOX SCRAPER/GRADER BLADE

CAUTION:Lockthetractorlifthandleinthedown

positionwhenattachingorremovingtheblade

fromthesleevehitch.

ATTACHING AND REMOVING BLADE

Refertoyoursleevehitchmanualandtogure7.

• Attachthebladetothesleevehitchonyourtractor

usingthesleevehitchpin.

• Screwthetwosleevehitchstabilizerboltsagainstthe

bladehitchandthentightenthejamnutstoeliminate

loosenessinthehookup.

• Adjustthesleevehitchsothatthebladeisfreetogo

belowgroundlevelbutcanstillberaisedaminimum

of5"abovegroundfortransport.

• Stabilizerboltsandjamnutsshouldbeloosened

beforeremovingthebladefromthesleevehitch.

HOW TO USE YOUR BOX SCRAPER/GRADER

BLADE

Usethisboxscraper/graderbladeforscrapingand

levelingoflooseorlightlycompacteddirtandgravel,for

backllingandforsnowremoval.Forimprovedtraction

usewheelweightsand/ortirechains.

• Topivottheblade,raisethesleevehitchsothatthe

bladeisofftheground.Removethepivotlockpinto

rotatethebladetotheright,left,straightaheador

reverseposition.

• Forbackllingorremovingsnow,thepositionofthe

blademaybereversed180degreesandthescarier

andtheboxendsremovedfromtheblade.Do not

backthebladeintopilesofsnowordirtathighspeed.

• Tokeepthescarierfromengagingthegroundduring

boxscraping,turnitupsidedown.Do not remove the

scarierifyouareusingthebladewiththeboxends

attached.

• Drivethetractorataspeedwhichtsconditionsand

thetypeofworkbeingperformed.Whenlevelingwith

theblade,aslowerspeedwillallowloosematerialto

bemoreevenlydepositedinlowspots.

ServiceDates

Checkforloosefasteners  X

 Cleaning   X  X

 MAINTENANCESCHEDULE

Fill in dates as you

 completeregularservice.

Before each use

Aftereachuse

Everyseason

Before storage

MAINTENANCE

CUSTOMER RESPONSIBILITIES

• Readandfollowthemaintenancescheduleandthemaintenanceprocedureslistedinthissection.

CLEANING

• Wipeofforwashoffdirtorsalttohelppreventrust.

ROTATE BLADE EDGES

•Rotatethebladetoptobottomwhenwearalongthe

bottomedgehasbecomesubstantial.

STORAGE

• Removealldirtandrustandtouchupwithpaint

beforestoring.

•Store inside a dry area.

FIGURE 7

CHECK FOR LOOSE FASTENERS

•Makeathoroughvisualcheckforanyboltsandnuts

whichmayhaveloosened.Retightenanyloosebolts

and nuts.

STABILIZER BOLTS

TRACTOR SLEEVE HITCH

REPAIR PARTS FOR MODEL 486.242411

REF. PART QTY. DESCRIPTION

NO. NO.

1 63656 1 HitchAssembly

 2 64279 1 Frame

 3 63506 1 PivotReinforcementBracket

    Assembly

 4 24233 1 Blade

 5 24231 1 ClevisBracket

 6 63507 1 ScarierAssembly

 7 24237 2 BoxEndPlate

 8 43432 6 HexBolt,3/8-16x2-1/2"Lg.

 9 43350 4 CarriageBolt,3/8-16x1"Lg.

 10 44326 4 CarriageBolt,5/16-18x1"Lg.

 11 46853 2 U-Bolt,3/8-16

REF. PART QTY. DESCRIPTION

NO. NO.

 12 HA21362 14 NylockNut,3/8-16Thread

 13 47810 4 NylockNut,5/16-18Thread

 16 43070 11 Washer,3/8"Std.Wrt.

 17 43038 1 PivotLockPin

 18 44044 2 ClevisPin,3/8"x3/4"Lg.

 19 46855 1 CotterPin,3/16"x2"Lg.

 20 43055 2 HairpinCotter,3/32"#3

 21 43343 1 HairpinCotter,1/8"#4

 22 23336 1 Washer,Special

  48339 1 OwnersManual

PARTS

19 17

12 12

16 2

® Registered Trademark / TM Trademark / SM Service Mark of Sears Brands, LLC

® Marca Registrada / TM Marca de Fábrica / SM Marca de Servicio de Sears Brands, LLC

MC Marque de commerce / MD Marque déposée de Sears Brands, LLC © Sears Brands, LLC

Get it fixed, at your home or ours!

Your Home

For expert troubleshooting and home solutions advice:

www.managemyhome.com

For repair – in your home – of all major brand appliances,

lawn and garden equipment, or heating and cooling systems,

no matter who made it, no matter who sold it!

For the replacement parts, accessories and

owner’s manuals that you need to do-it-yourself.

For Sears professional installation of home appliances

and items like garage door openers and water heaters.

1-800-4-MY-HOME®(1-800-469-4663)

Call anytime, day or night (U.S.A. and Canada)

www.sears.com www.sears.ca

Our Home

For repair of carry-in items like vacuums, lawn equipment,

and electronics, call anytime for the location of your nearest

Sears Parts & Repair Service Center

1-800-488-1222 (U.S.A.) 1-800-469-4663 (Canada)

www.sears.com www.sears.ca

To purchase a protection agreement on a product serviced by Sears:

1-800-827-6655 (U.S.A.) 1-800-361-6665 (Canada)

Para pedir servicio de reparación

a domicilio, y para ordenar piezas:

1-888-SU-HOGAR®

(1-888-784-6427)

Au Canada pour service en français:

1-800-LE-FOYERMC

(1-800-533-6937)

www.sears.ca

Inhaltsverzeichnis

Andere Craftsman Rasen- und Gartengeräte Handbücher

Craftsman

Craftsman TRACTOR LIFT 610.246 Bedienungsanleitung

Craftsman

Craftsman 240.74801 Bedienungsanleitung

Craftsman

Craftsman 486.248463 Bedienungsanleitung

Craftsman

Craftsman 917.252492 Bedienungsanleitung

Craftsman

Craftsman 486.24116 Bedienungsanleitung

Craftsman

Craftsman CMCA320 Bedienungsanleitung

Craftsman

Craftsman 917.248950 Bedienungsanleitung

Craftsman

Craftsman 486.244283 Bedienungsanleitung

Craftsman

Craftsman 316.792570 Bedienungsanleitung

Craftsman

Craftsman 486.243001 Bedienungsanleitung

Craftsman

Craftsman 486.244121 Bedienungsanleitung

Craftsman

Craftsman 19A30041791 Bedienungsanleitung

Craftsman

Craftsman 358.796355 Bedienungsanleitung

Craftsman

Craftsman 610.24610 Bedienungsanleitung

Craftsman

Craftsman 610.24600 Bedienungsanleitung

Craftsman

Craftsman 944.361065 Bedienungsanleitung

Craftsman

Craftsman 358.796340 Bedienungsanleitung

Craftsman

Craftsman 29918 - 17 in. Dual Rear Tine Tiller-CA... Bedienungsanleitung

Craftsman

Craftsman 842.242560 Bedienungsanleitung

Craftsman

Craftsman 917.249483 Bedienungsanleitung

Craftsman

Craftsman BUSHWACKER 517.795670 Bedienungsanleitung

Craftsman

Craftsman 247.24019.1 Bedienungsanleitung

Craftsman

Craftsman 917.248951 Bedienungsanleitung

Craftsman

Craftsman 486.244120 Bedienungsanleitung

Beliebte Rasen- und Gartengeräte Handbücher anderer Marken

Vertex

Vertex 1/3 HP Technische Daten

GHE

GHE AeroFlo 80 Bedienungsanleitung

Millcreek

Millcreek 406 Bedienungsanleitung

Land Pride

Land Pride Post Hole Diggers HD25 Bedienungsanleitung

Yazoo/Kees

Yazoo/Kees Z9 Commercial Collection System Z9A Programmierhandbuch

Premier designs

Premier designs WindGarden 26829 Bedienungsanleitung

Snapper

Snapper 1691351 Bedienungsanleitung

Mosquito Magnet

Mosquito Magnet Patriot Bedienungsanleitung

Perfect

Perfect BG2 Bedienungsanleitung

P.Lindberg

P.Lindberg LS2 Bedienungsanleitung

Gardena

Gardena Easy 1887 Bedienungsanleitung

Makita

Makita UM104D Bedienungsanleitung

AQUA FLOW

AQUA FLOW PNRAD Bedienungsanleitung

Tru-Turf

Tru-Turf RB48-11A Golf Green Roller Benutzerhandbuch

BIOGROD

BIOGROD 730710 Bedienungsanleitung

Land Pride

Land Pride RCF2784 Bedienungsanleitung

Makita

Makita UM110D Bedienungsanleitung

BOERBOEL

BOERBOEL Standard Floating Bar Gravity Latch Bedienungsanleitung