Craftsman 919.670040 Bedienungsanleitung

JtVIPORTANT:

Read the Safety Guidelines

and All instructions Care-

fully Before Operating

I CRRFTSMIINI

120/240 VOLT _ 4250 WATT

•SAFETY GUUDELUNES

•ASSEMBLY

•OPERATUON

•MAUNTENANCE

•TROUBLESHOOTUNG

•REPAUR PARTS

SoBd by Sears Canada, inco, Tetente, Onto MSB2B8

MGP-670040 Rev. 0 12/6/99

DATEPURCHASED:

MODEL NO:

SERIAL NO:

STOREWHERE PURCHASED:

ADDRESS:

CITY:

TELEPHONE:

Record the above information about your unit

so that you will be abHe to provide it in case of

Hoss or theft.

HORSE POWER

GASOLINE CAPACITY

OiL CAPACITY

MAINTENANCE AGREEMENT

The Sears Warranty, pHusa Maintenance Agreement, pro-

vide maximum vaHuefor your Sears products. Contact

your nearest Sears store for detMHs.

CUSTOMER RESPONSiBiLiTiES

Read and observe the safety ruHes.

Follow a reguHarscheduHe in maintaining, caring for and

using your generator.

Follow the instructions under "Customer Responsibili-

ties" and "Storage" sections of this owner's manual.

FULL ONE YEAR WARRANTY ON CRAFTSMAN GENERATORS

For one year from the date of purchase, when this Craftsman generator is maintained and operated according to the instruc-

tions in this owner's manual, Sears wilI repair, free of charge, any defect in material and workmanship.

if your Craftsman Generator is used for commercia! or rentaJ purposes, this warranty applies for only 90 days from the original

date of purchase.

FULL ONE YEAR WARRANTY ON CRAFTSMAN ENGINE

For one year from the date of purchase, when this Craftsman engine is maintained and operated according to the instructions

in this owner's manual, Sears will repair, free of charge, any defect in material and workmanship.

if your Craftsman engine is used for commercia! or rental purposes, this warranty applies only for 90 days from thedate of

purchase. This warranty does not cover: Expendable items such as spark plugs and air filters, which become worn during

normaJ use.

Repairs necessary because of operator abuse or negligence, including damage resulting from no oil being supplied to

the engine or failure to maintain the equipment according to the instructions contained in this owner's manual, are not

covered under warranty.

WARRANTY SERVICE IS AVAILABLE BY RETURNING THE GENERATOR TO THE NEAREST SEARS SERVICE CENTER. This

warranty gives you specific legal rights and you may also have other rights, which vary from PROVINCE TO PROVINCE.

Sold by Sears Canada, inc., Toronto, Ont.

MGP670040 2 -- ENG

This manuaH contains information that is important for you to know and understand. This information reHatesto

protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To heHpyou recognize this information,

we use the symboHs to the right. Hease read the manuaH and pay attention to these sections.

DANGER indicates an imminently hazardous situation

which, if not avoided, will result in death or serious

WARNING indicates a potentially hazardous situation

which, if not avoided, coumdresult in death of serious

CAUTION indicates a potentially hazardous situation

which, if not avoided, _ result in minor or moderate

CAUTION used without the safety alert symbol indicates a

potentially hazardous situation which, if not avoided,

result in

This product is not equipped with a spark arresting muffler. Ifthe product wi[[ be used around flammable

materials, or on land covered with materials such as agricultural crops, forest, brush, grass, or other similar items,

then an approved spark arrester must be installed and may be legally required in other countries.

SAVE THin=St=iNSTRUCTiONS

When using this product basic precautions should always be

followed including the following:

HAZARD

RBSK OF ELECTROCUTBON AND FBRE

WNAT COULD NAPPEN NOW TO PREVENT iT

Never backfeed electricity through

a structure's electrical system.

Back feeding electricity through a

building's electrical system to the

outside utility feed lines could en-

danger repair persons attempting to

restore service.

Attempting to connect to the incom-

ing utility service could result in

electrocution.

Restoration of electrical service while

the generator is connected to the

incoming utility could result in a fire or

serious damage if a isolator switch is

not installed.

Attempting to connect generator di-

rectly to the electrical system of any

building structure.

Failure to use a double throw transfer

switch when connecting to a struc-

tures electrical system can damage

appliances and WILL VOiD the

manufacturers warranty.

To connect to a structure's electri-

cal system in a safe manner,

always have a Double-Throw

Transfer Switch installed by a

qualified electrician and in compli-

ance with local ordinances. {When

installing a Double-Throw

Transfer Switch, a minimum of

10 gauge wiring must be used.)

3-- ENG MGP_;70040

READ AN{) UNDERSTAND ALL WARNmNG$ BEFORE

ATTEMPTBNG TO OPERATE GENERATOR°

RBSK OF ELECTROCUTBON AND FBRE .(cont'd}

HAZARD

Operation of generator in rain, wet,

icy, or flooded conditions.

Use of worn damaged, undersized

or ungrounded extension cords.

Piacing generator on or against

higHy conductive surface, such as

a steei waikway or metai roof.

Improper connection of items to

generator.

Operation of unit when damaged, or

with guards or paneb removed.

WHAT COULD HAPPEN

Water is an excellent conductor of ebc-

tricity! W/ater which comes in contact

with electrically charged components

can transmit electricity to the frame and

other surfaces, resulting in electrical

shock to anyone contacting them.

Contact with worn or damaged exten-

sion cords could result in electrocution.

Use of undersize extension cords could

result in overheating of the wires or at-

tached items, resulting in fire.

Use of ungrounded cordsets could pre-

vent operation of circuit breakers and

result in electrical shock.

Accidental leakage of electrical current

could charge conductive surfaces in

contact with the generator.

Exceeding the load capacity of the gen-

erator by attaching too many items, or

items with very high load ratings to it

could result in overheating of some

items or their attachment wiring result-

ing in fire or electrical shock.

Attempting to use the unit when it has

been damaged, or when it is not func-

tioning normally could result in fire or

electrocution.

Removal of guarding could expose

electrically charged components and

result in electrocution.

HOW TO PREVENT iT

Operate generator in a clean, dry,

well ventilated area. Make sure

hands are dry before touching unit.

Inspect extension cords before use

and replace with new cord if re-

quired.

Use proper size (wire gauge) cordset

for application see chart in the As-

sembly section of this manual

Always use a cordset having a

grounding wire with an appropriate

grounding plug. DO NOT use an

ungrounded plug.

Place generator on low conductiv-

ity surface such as a concrete

slab.

ALWAYS operate generator a

minimum of six feet from any

conductive surface.

Read the load rating chart and in-

structions in the Wattage Calcula-

tion section. Make sure that the

summation of electrical loads for all

attachments does not exceed the

load rating of the generator.

Do not operate generator with me-

chanical or electrical problem. Have

unit repaired by an Authorized Ser-

vice Center.

Do not operate generator with pro-

tective guarding removed.

MGP670040 4 -- ENG

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTBNG TO OPERATE GENERATOR°

RiSK OF FiRE

HAZARD

Attempting to fill the fuel tank while

the engine is running.

Sparks, fire, hot objects

Improper storage of fuel

Inadequate ventilation for genera-

tor

Tampering with factory set engine

speed settings.

Overfilling the fuel tank -

fuel spillage.

WHAT COULD HAPPEN

Gasoline and gasoline vapors can

become ignited by coming in contact

with hot components such as the

muffler, engine exhaust gases, or from

an electrical spark.

Cigarettes, sparks, fires, or other hot

objects can cause gasoline or gaso-

line vapors to ignite.

Improperly stored fuel could lead to

accidental ignition. Fuel improperly

secured could get into the hands of

children or other unqualified persons.

Materials placed against or near the

generator or operating the generator

in areas where the temperature

exceeds 104 ° R ambient (such as

storage rooms or garages) can

interfere with its proper ventilation

features causing overheating and

possible ignition of the materials or

buildings.

Engine speed has been factory set to

provide safe operation. Tampering

with the engine speed adjustment

could result in overheating of attach-

ments and could cause a fire.

Spilled fuel and its vapors can be-

come ignited from hot surfaces or

sparks.

HOW TO PREVENT iT

Turn engine off and allow it to cool

before adding fuel to the tank.

Equip area of operation with a fire

extinguisher certified to handle

gasoline or fuel fires.

Add fuei to tank in weii ventilated

area. Make sure there are no

sources of ignition near the

generator.

Store fuel in a OSHA approved

container designed to hold gaso-

line. Store container in secure

location to prevent use by others.

Operate generator in a clean, dry,

weii ventilated area a minimum of

four feet from any building, object

or waii. DO NOT OPERATE UNiT

iNDOORS OR iN ANY CON=

FINED AREA.

Never attempt to "speed=up" the

engine to obtain more perfor-

mance. Both the output voltage

and frequency wiil be thrown out

of standard by this practice,

endangering attachments and the

user.

Use care in filling the tank to avoid

spilling fuel. Make sure fuel cap is

secured tightly and check engine

for fuel leaks before starting

engine. Move generator away

from refueling area or any spillage

before starting engine. Allow for

fuel expansion. Keep maximum

fuel level 1Ainch below the tip of

the fuel tank. Never refuel with the

5 -- ENG lvlGP670040

READ AND UNDERSTAND ALL WARNNNG$ BEFORE

Risk of in'u.Lu_r_zand Proeper_vtDa_ao_lLe When

Trans_q Generater

WHAT COULD HAPPEN

Fuei or oii can bak or spill and couid

resuit in fire or breathing hazard,

serious injury or death can resuit. Fuei

or oii baks will damage carpet, paint

or other surfaces in vehbbs or

traibrs.

HAZARD

Fire, hhaiation, Damage to Vehicle

Surfaces

HOW TO PREVENT iT

If generator is equipped with a fuel

shut-off valve, turn the valve to the

off position before transporting to

avoid fuel leaks. If generator is not

equipped with a fuel shut-off valve,

drain the fuel from tank before

transporting. Transport fuel only in

an OSHA approved container.

Always place generator on a

protective mat when transporting

to protect against damage to

vehicle from leaks. Remove

generator from vehicle immedi-

ately upon arrival at your destina-

tion

RISK OF BREATHING - INHALATION HAZARD

HAZARD

Gasoline engines produce toxic

carbon monoxide exhaust fumes.

WHAT COULD HAPPEN

Breathing exhaust fumes will cause

serious injury or death.

HOW TO PREVENT iT

Operate generator in clean, dry,

weii ventilated area. Never

operate unit in enclosed areas

such as garages, basements,

storage, sheds, or in any location

occupied by humans or animals.

Keep children, pets and others

away from area of operating unit.

bIGP 670040 6 -- ENG

READ AND UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTBNG TO OPERATE GENERATOR°

RiSK OF UNSAFE OPERATION

HAZARD

Operation of generator in carebss

manner.

Operation of voitage sensitive appii-

ances without a voitage surge pro-

tector.

Raising or suspending generators

equipped with iift rings improperly

Operating generator wNe suspended

WHAT COULD HAPPEN

AHsources of energy include the

potential for injury. Unsafe operation

or maintenance of your generator

could lead to serious injury or death

to you or others.

Any gasoline operated household

generator wiii incur voltage variations

causing damage to voltage sensitive

appliances or could result in fire.

Generator could fall causing serious in-

jury or death to you or others.

Improper raising or suspending can

cause damage to the generator.

Generator wiii not operate properly

and wiii cause damage to the genera-

tor and could cause serious injury or

death to you or others.

HOW TO PR_:V_:NT iT

Review and understand all of

the operating instructions and

warnings in this manual.

Become familiar with the

operation and controls of the

generator. Know how to shut it

off quickly.

Equip area of operation with a

fire extinguisher certified to

handle gasoline or fuel fires.

o Keep children or others away

from the generator at all times.

Always use a U.L listed voltage

sensitive surge protector to

connect voltage sensitive appli-

ances such as TV, computer, or

stereo equipment, Failure to use

aU,L, listed voltage surge

protector will void the warranty

on your generator°

Notice: A multiple outlet strip is

not a surge protector make sure

you use a U.L listed voltage surge

9rotector.

Always use proper connecting

srocedures as described in this

manual when connecting cables,

chains, or straps for raising or

suspending generators equipped

with lift rings.

Always use cables, chains, or

straps rated at 2000 Ibs working

load or more to raise or suspend

generator.

Never operate generator while

suspended or in an unievei posi-

tion. Always operate generate on

a fiat, level surface.

7 -- ENG lvlGPc_70040

REAO ANO UNDERSTAND ALL WARNINGS BEFORE

ATTEMPTBNG TO OPERATE GENERATOR°

RiSK OF HOT SURFACES

HAZARD

Contact with hot engine and

generator components.

WHAT COULD HAPPEN

Contact with hot surfaces, such as

engines exhaust components, could

result in serious burns.

HOW TO PREVENT iT

During operation, touch only the

control surfaces of the generator.

Keep children away from the

generator at all times. They may

not be able to recognize the

hazards of this producL

RiSK OF MOVING PARTS

HAZARD

Contact with moving parts can

result in serious injury.

WHAT COULO HAPPEN

The generator contains parts which

rotate at high speed during operation.

These parts are covered by guarding

to prevent injury.

HOW TO PREVENT iT

Never operate generator with

guarding or cover plates removed.

Avoid wearing loose fitting clothing

or jewelry which could be caught

by moving parts.

I_ i RiSK FROM LiFTiNG

HAZARD WHAT COULD HAPPEN HOW TO PREVENT iT

Lifting a very heavy object. Serious injury can result from at- The generator is too heavy to be

tempting to lift too heavy an objecL lifted by one person. Obtain

assistance from others before you

try to move it.

MGP670040 8 -- ENG

CARTON CONTENTS °Parts Bag

t-Generator

1°Parts Box

f ....

t-Handle

"t - TwistJock Plug LS-20P

t = Owner's ManuaJ

"t =Twistloek PJug L14-20P

* _ To be installed and/or used in

accordance with appropriate HocaHeHectricaHcodes

and regubfions. Refer to enclosed instructions for

proper installation.

t =isolator Foot 7 =5/16-t8 x 3/4 " 9-5/t6=t8

Cap Screws Lock Nuts

(6 used)

2= Washers 2- 3/8ot6

Lock Nuts

Read owner's manual. Do not attempt to operate equipment until you have read Owner's

Manual for Safety, Assembly, Operation, Maintenance, Storage Instructions.

NOTE: Left and right describes the location of a part

with the operator facing the outlet panel.

TOOLS NEEDED FOR ASSEMBLY

1- Box Cutter or Knife

2 - 1/2" Wrenches

2 - 9/16" Wrenches

1 - 1" thick x 1' square piece of wood

REMOVE GENERATOR FROM CARTON

Open carton from top.

Cut carton along dotted lines.

Remove all carton inserts.

Remove generator through opening in carton.

iMPORTANT: Before any attempt to start your genera-

tor be sure to check engine oil (See Adding Engine Oil

paragraph in the Operation section on page 13 of this

manual.)

9 -- ENG MGP670040

GROUNDBNG THE GENERATOR

A grounding lug is supplied with the generator for use

when required by local electrical ordinances. Refer to

article 250 of the National Electrical Code to clarify

any needed grounding information. Your local electric

company or a certified electrician should be able to

help you with this information.

NOTE: Your engine is already grounded to the frame

by a grounding strap.

Grounding Lug

mNSTALUNG WHEEL KmT

The Craftsman Wheel Kit was designed to greatly

improve the portability of your generator.

Drain gas and oimbefore

assembming the portabimity

kit. Faimure to do so wimmcause damage to the

engine.

NOTE: Always follow state regulations for proper oil

disposal.

Place generator on level ground; drain all gas and

oil from the engine (see engine manual for correct

procedure).

Place a 1" thick x 1' square piece of wood on the

ground in front of the engine. With the help of

another person, tilt the generator and rest the

recoil starter on the wood. NOTE: This will

support the gasoline engine during assembly and

Place a handle cap (7) onto each end of handle

prior to installation.

The handle should be installed on the electrical

outlet end of the generator. Place one washer

(12) on long cap screws (11). Align the handle

brackets with the upper hobs pre-drilled in the

generator frame. Place mentioned screws through

frame and handle brackets. Secure with lock nuts

(8) and tighten.

o Locate the engine support. Place one wheel

bracket (4) on top of support as shown in iiiustra-

tion. Align with the pre-drilled hobs in support.

Place 2 cap screws (9) through holes in bracket

and support. Secure with 2 lock nuts (8) and

tighten.

Insert one shoulder bolt (2) into wheel (1). Insert

threaded end of bolt through wheel bracket,

secure with lock nut (8) and tighten. NOTE: The

wheemwimmnot rub frame if inatammedpropermy.

*Repeat the above steps for the opposite side.

Insert the threaded stud of rubber foot (10)

through the middle hob of the foot bracket (5)_

Secure with lock nut (8) and tighten.

Locate the support under the electrical outlet end

of the generator. Position foot bracket (5), with

rubber foot installed, under the support and align

the hobs in the foot bracket (5) with the dots in

the support. Place one cap screw (9) through

each dot in the support and the hobs in the foot

bracket. Secure with the lock nuts (8) and tighten.

Once completed, the wheel kit is ready for use.

b1<_p67oo4o 10 --ENG

Inhaltsverzeichnis

Andere Craftsman Tragbarer Generator Handbücher

Craftsman

Craftsman 580.325600 Bedienungsanleitung

Craftsman

Craftsman CMXGGAS030729 Bedienungsanleitung

Craftsman

Craftsman 580.327141 Bedienungsanleitung

Craftsman

Craftsman 580.327181 Bedienungsanleitung

Craftsman

Craftsman 580.325650 Bedienungsanleitung

Craftsman

Craftsman 580.327140 Bedienungsanleitung

Craftsman

Craftsman 580.675610 Bedienungsanleitung

Craftsman

Craftsman 580.328391 Bedienungsanleitung

Craftsman

Craftsman 580.329100 Bedienungsanleitung

Craftsman

Craftsman 580.325610 Bedienungsanleitung

Craftsman

Craftsman CMXGGAS030791 Bedienungsanleitung

Craftsman

Craftsman 580.675610 Bedienungsanleitung

Craftsman

Craftsman 580.327750 Bedienungsanleitung

Craftsman

Craftsman 580.329180 Bedienungsanleitung

Craftsman

Craftsman 919.679470 Bedienungsanleitung

Craftsman

Craftsman 580.328300 Bedienungsanleitung

Craftsman

Craftsman CMXGIAC2200 Bedienungsanleitung

Craftsman

Craftsman 580.329120 Bedienungsanleitung

Craftsman

Craftsman 580.675611 Bedienungsanleitung

Craftsman

Craftsman 919.679500 Bedienungsanleitung

Craftsman

Craftsman 580.327130 Bedienungsanleitung

Craftsman

Craftsman 580.329160 Bedienungsanleitung

Craftsman

Craftsman 580.327360 Bedienungsanleitung

Craftsman

Craftsman 919.679501 Bedienungsanleitung

Beliebte Tragbarer Generator Handbücher anderer Marken

Kohler

Kohler 20EORZ Bedienungsanleitung

Powerhorse

Powerhorse 83171 Bedienungsanleitung

HURST

HURST ML-630-SI Bedienungsanleitung

ETQ

ETQ TG4000 Bedienungsanleitung

Briggs & Stratton

Briggs & Stratton 40265 Einrichtungshandbuch

evertz

evertz 7700 Series Bedienungsanleitung

Firefly

Firefly Cygnus CYG2400/460/24 Bedienungsanleitung

Owon

Owon Waveform Generator Bedienungsanleitung

Draper

Draper PG950S Firmware-Update

SDMO

SDMO SH 4000 Bedienungsanleitung

EINHELL

EINHELL STE 5500 Bedienungsanleitung

Wanco

Wanco WI3000P Bedienungsanleitung

Full Boar

Full Boar FBT-3300 Bedienungsanleitung

Dwyer Instruments

Dwyer Instruments ASG Bedienungsanleitung

Westinghouse

Westinghouse WH1000i Series Bedienungsanleitung

Wallenstein

Wallenstein GF5000A Bedienungsanleitung

Leroy-Somer

Leroy-Somer LSA 49.1 Bedienungsanleitung

Yamakoyo

Yamakoyo SH2900DX Bedienungsanleitung