Craftsman 113.177571 Bedienungsanleitung

Save This Manual

for Future Reference

SEAIRS

owner's

manual

MODEL NO.

113.177571

Serial

Number

Model and serial

numbers may be found

on the handle. You

should record both

model and serial

numbers in a safe

place for future use.

FOR YOUR

SAFETY

READ ALL

INSTRUCTIONS

CAREFULLY

SEA/RS/I:RR F¥$MR#

PORTABLE

WET/DRY VAC

• assembly

•operating

•repair parts

Sold by SEARS, ROEBUCK AND CO., Hoffman Estates, IL. 60179 U.S.A.

Part No. SP5704 Printed in U.S.A.

FULL ONE YEAR WARRANTY

ON CRAFTSMAN WET/DRY VACS

If within one year from the date of purchase, this Craftsman Wet/Dry Vac fails

due to a defect in material or workmanship, Sears will repair it, free of charge.

If this Craftsman Wet/Dry Vac is used for commercial or rental purposes,

this warranty coverage applies for only 90 days from date of purchase.

WARRANTY SERVICE IS AVAILABLE BY SIMPLY CONTACTING THE NEAR-

EST SEARS SERVICE CENTER/DEPARTMENT THROUGHOUT THE UNITED

STATES.

This warranty applied only while this product is used in the United States.

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state.

SEARS, ROEBUCK AND CO., D817 WA,

Hoffman Estates, IL 60179

IMPORTANT SAFETY INSTRUCTIONS

When using your Wet/Dry Vac, follow

basic safety precautions including the fol-

lowing.

WARNING To reduce

the risk of fire, electric shock, or

injury:

Read and understand this owner's man-

ual and all labels on the Wet/Dry Vac

before operating. Use only as described

in this manual. To avoid personal injury or

damage to Wet/Dry Vac, use only Sears

Craftsman recommended accessories.

Sparks inside the motor can ignite flam-

mable vapors or dust. To avoid fire or

explosion:

• Do not vacuum, or use this Wet/Dry

Vac near, flammable or combustible liq-

uids, gases, or explosive dusts like

gasoline or other fuels, lighter fluid,

cleaners, oil- based paints, natural gas,

hydrogen, coal dust, magnesium dust,

grain dust, or gun powder.

• Do not use vac as a sprayer for any

flammable or combustible liquid.

Do not vacuum anything that is burning

or smoking, such as cigarettes, matches,

or hot ashes.

To avoid health hazards from vapors or

dusts, do not vacuum toxic materials.

Do not use or store near hazardous

materials.

To avoid electric shock, do not expose to

rain. Store indoors.

Do not allow to be used as a toy. Close

attention is necessary when used by or

near children.

Do not use this Wet/Dry Vac with a torn

filter or without the filter installed.

Do not leave Wet/Dry Vac when plugged

in. Unplug from outlet when not in use

and before servicing. Turn off Wet/Dry

Vac before unplugging.

To avoid injury from accidental starting,

unplug power cord before changing or

cleaning filter.

Do not unplug by pulling on cord. To

unplug, grasp the plug, not the cord.

Do not use with damaged cord, plug or

other parts. If your Wet/Dry Vac is not

working as it should, has missing parts,

has been dropped, damaged, left out-

doors, or dropped into water, return it to a

Sears Service Center.

Donotpullorcarrybycord,usecordas

handle,closeadooroncord,orpullcord

aroundsharpedgesorcorners.Donot

runWet/DryVacovercord.Keepcord

awayfromheatedsurfaces.

DonothandleplugortheWet/DryVac

withwethands.

Donotputanyobjectintoventilation

openings.Donotvacuumwithanyventi-

lationopeningsblocked;keepfreeof

dust,lint,hairor anythingthatmay

reduce air flow.

Keephair,looseclothing,fingers,andall

partsofbodyawayfromopeningsand

movingparts.

Toavoidfalls,useextracarewhenclean-

ingonstairs.

ThisWet/DryVacis double-insulated,

eliminatingthe needfor a separate

groundingsystem.Useonlyidentical

replacementparts.Readtheinstructions

for ServicingDouble-InsulatedWet/Dry

Vacsbeforeservicing.

Extensioncordsinpoorconditionorthat

aretoosmallcanposefireandshock

hazards.Whenusinganextensioncord,

besureitisingoodcondition.Usingany

extensioncordwillcausesomelossof

power.Tokeepthelosstoaminimum,

usethefollowingtabletochoosethemin-

imumwiresizeextensioncord.

Extension Cord Length Wire Size

0-50 feet No. 14

50-100 feet No. 12

Observe the following warnings that

appear on the motor housing of your Wet/

Dry Vac.

DOUBLE INSULATED, GROUND-

'_ING NOT REQUIRED. WHEN

SERVICING USE ONLY IDENTI-

CAL REPLACEMENT PARTS.

WARNING: To avoid electricshock- do not

exposeto rain-storeindoors.

WARNING: For your own safety,read and

understandowner's manual.Donotpick up

hot ashes, coals,toxic,flammable or other

hazardous materials. Do not use around

explosiveliquidsorvapors.

Safety Signal Words

DANGER: means if the safety informa-

tion is not followed someone will be seri-

ously injured or killed.

WARNING: means if the safety informa-

tion is not followed someone could be

seriously injured or killed.

CAUTION: means if the safety informa-

tion is not followed someone might be

injured.

SAVE THESE INSTRUCTIONS

The operation of any utility vac can result

in foreign objects being blown into the

eyes, which can result in severe eye dam-

age. Always wear safety goggles comply-

ing with ANSI Z87.1 (shown on package)

before commencing operation. Safety

Goggles are available at Sears retail

stores.

To avoid hearing damage, wear ear pro-

tectors when using the vac for extended

hours or when, using it in a noisy area.

WEAR YOUR

Introduction

This Wet/Dry Vac is intended for house-

hold use only.

IMPORTANT NOTE

Please Read Carefully

Static Shocks Are Common - In dry

areas or when the relative humidity of the

air is low. To reduce the frequency of

static shocks in your home the best rem-

edy is to add moisture to the air with a

console humidifier.

Owner's Manual Contents

Item Page

Warranty Information ............................. 2

Safety Instructions ................................. 2

Introduction ............................................ 4

Unpacking and Checking

Carton Contents ............................. 4

Assembly ............................................... 4

Filter Assembly ...................................... 6

Operation ............................................... 8

Maintenance ........................................ 10

Repair Parts ......................................... 10

Unpacking and Checking Carton Contents

Remove entire contents of carton. Check

each item against the Carton Contents

List. Notify your Sears Store immediately

if any parts are damaged or missing.

Carton Contents List

Key Description ............................ Qty

A Wet/DryVac ................................ 1

B Utility Nozzle ............................... 1

C Hose ........................................... 1

D Air Deflector ................................ 1

E Owners Manual ........................... 1

F Float ............................................ 1

G Filter Cage .................................. 1

H Filter (Purple Stripe) .................... 1

I Filter Plate ................................... 1

J Filter Nut ..................................... 1

K Extension Wands ........................ 2

L Caster ......................................... 4

J0- K

Float/Cage Assembly

WARNING: For your own safety,

never connect plug to power source

outlet until all assembly steps are

complete and you have read and

understood the safety and operation

instructions. Do not operate vac with

any parts damaged or missing.

NOTE: Your Wet/Dry Vac is shipped

unassembled. Read the following assem-

bly instructions carefully.

1.Grasp tabs on both the right and left

side of the power head. Slowly pull

tabs away from drum and lift the power

head off the drum. Flip the power head

and place it in the drum.

2. Locate the float. Place the float over

the opening in the center of the lid.

WARNING: To avoid personal injury

or damage to vac be sure to keep

hands, fingers, or any other foreign I

objects out of the center opening

when assemb ng the float.

3. Line up filter cage tabs with the slots in

the center ring of the lid.

4. Push on the filter cage until the tabs

snap into the slots for a secure fit. (One

tab at a time)

NOTE: If the filter cage needs to be

removed, use a slotted screwdriver and

insert the blade near one of the tabs

between the filter cage and the center

ring of the lid. Pry the tab out of the slot.

Tilt the filter cage and lift slightly away

from the lid. To replace, follow float/cage

assembly instructions.

,/,/__ Powir Head

_Flexible

Locking Tab'-_

Drum Pull_.t/,_

Lift Up _

Drum/"- _======

Float

Lid

_Filter Cage

Power Head

Drum

_ slo1_(3)-'-

FilterAssembly

1.Carefully slide the filter onto the filter

cage, sliding it over the center ring cov-

ering the 3 slots until the filter stops

against the lid.

2. Place the hole in the filter plate over

threaded screw of the filter cage.

3. Gently push on the filter plate to seat

the rubber ring of the filter inside the

circular channel of the filter plate.

4. Place filter nut onto threaded screw

and tighten it. Finger tighten only.

NOTE: Lever of filter nut should be away

from plate as shown.

IMPORTANT: Do not overtighten as this

may deform or crack the filter plate or fil-

ter cage.

5. To assemble the power head to the

drum, position power head over drum,

with flexible tabs lined up with recess in

drum. (The power head will only fit on

the drum one way).

6. Push down on the power head and lis-

ten for the locking tabs to "snap" in

place.

7. Your Wet/Dry Vac is now ready to use.

Read the instructions on the following

pages to operate your Portable Vac

safety.

Purple Stripe

Filter Cage

_Filter Nut

_..,... Filter Plate

Filter

Power Head

Drum Locking Tabs

NOTE: Your filter has a purple stripe that

matches an in-store displayer. When you

visit your local Sears store, just remem-

ber the color of your stripe for the correct

size filter.

Getting to Know Your Wet/Dry Vac

1. Familiarize yourself with the controls

and features of your Wet/Dry Vac

before operating.

• Flip switch forward to turn "ON".

• Flip switch to the rear to turn "OFF".

ON!OFF

Switch

Hose

Handle

Carrying

Strap

Vacuum

Port Drurr.

Power Head

Blowing Port

Air Deflector

Cord

Locking Tabs

Cord Storage

1.Your Wet/Dry Vac has a convenient

area to store your power cord.

2. Coil the power cord neatly and store it

below the handle, when not in use, in

the opening above the warning label

and model number label.

partially unwrapped I

CAUTION: A

cord may fall in coils near your feet.

You could trip. To avoid this, always

fully unwrap the cord before plugging

it in.

Carrying Your Vac

Your Wet/Dry Vac is supplied with an eas-

ily adjustable shoulder strap. Adjust the

strap so that the Wet/Dry Vac rests com-

fortably on your hip.

To Lengthen The Strap: Pull on strap at

"A", the length you would like to lengthen

the strap. Then pull on strap at "B" until

tight.

To Shorten The Strap: Pull on strap in a

downward position at "A", the length you

would like to shorten strap. Then pull on

rivet end of strap until the strap becomes

tight.

To Carry Your Wet/Dry Vac: Place strap

on your shoulder as pictured. The other

method of carrying is to use the handle

that is built into the power head. To avoid

tripping on the strap, drape it on the out-

side as pictured.

Adjustable

Strap

Power Cord

Rivet

BEnd

Install/Adjust Air Deflector

An air deflector is supplied with your Wet/

Dry Vac. This allows you to direct the

powerful flow of air that is exhausted from

the blowing port of your Wet/Dry Vac.

1. Insert one end of the deflector in the

blower port located in the rear of the unit.

2. The air deflector can be set at any posi-

tion to accommodate your needs by

simply rotating it to the desired position.

WARNING: To avoid eye injury, install

and turn the air deflector away from

operator s or bystanders eye eve.

Operation

Rear

Blowing Air

Port Deflector

WARNING

To avoid fire or explosion, do not operate this vac in areas with flammable gases

or flammable vapors such as lighter fluid, cleaners, oil-base paints, gasoline,

alcohol or explosive dust such as coal, magnesium, grain or gun powder in the

air. Do not vacuum explosive dust, flammable or combustible liquids or hot

ashes. Do not use this vac as a sprayer for any flammable or combustible liquid.

To avoid health hazards from vapors or dusts, do not vacuum toxic materials. To

avoid electrical shock do not expose to rain. Store vac indoors. Unplug power

cord before changing or cleaning filter or emptying the dust drum.

CAUTION: To avoid hearing damage

wear ear protectors when using the

vac for extended hours or when

using it in a noisy area.

The operation of any utility vac can

result in foreign objects being blown

into the eyes, which can result in severe

eye damage. Always wear safety gog-

gles complying with ANSI Z87.1 (shown

on package) before commencing opera-

tion. Safety Goggles are available at

Sears retail stores.

To reduce the risk of electric shock, this

appliance has a polarized plug (one

blade is wider than the other). This plug

will fit in a polarized outlet only one way. If

the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit, con-

tact a qualified electrician to install the

proper outlet. Do not change the plug in

any way.

Vacuuming Dry Materials

1.The filter must be in correct position at

all times to avoid leaks and possible

damage to vac.

2. When using your vac to pick up very

fine dust, it will be necessary for you to

empty the drum and clean the filter at

more frequent intervals to maintain

peak performance.

NOTE: A dry filter is necessary to pick up

dry material. If you use your vac to pick

up dust when the filter is wet, the filter will

clog quickly and be very difficult to clean.

3. If your filter is wet but you need to use

the vac to pick up dry material, you can

quickly dry the filter by running the vac

without hose attached for about 10

minutes. The clean air rushing through

the vac will dry the filter enough for dry

pick up.

Vacuuming Liquids

1.When vacuuming liquids the filter

should be left in place at all times.

2. Misting may appear from the blowing

port, this is normal.

3.This Wet/Dry Vac is equipped with a

float mechanism which will rise auto-

matically to cut off the air flow when the

liquid in the drum reaches a predeter-

mined level. When this happens, turn

off the vac, unplug the power cord, and

empty the drum. You will know that the

float has risen because airflow ceases

and the motor noise becomes higher in

pitch, due to increased motor speed.

The liquid capacity may vary with rate

of pickup.

IMPORTANT: To avoid damage to the

vac do not run motor with float in raised

position.

4.After using the vac to pick up liquids,

the filter must be dried to avoid possi-

ble mildew and damage to the filter.

Emptying the Drum

WARNING: To avoid injury from acci-

dental starting, unplug power cord

before emptying the drum.

Filter Maintenance

WARNING: Do not remove the filter I

cage. It is there to help prevent your

fingers from getting into the blower

whee.

Cleaning

Your filter should be cleaned often to

maintain peak vac performance.

Be sure to dry the filter before storing or

picking up dry debris.

NOTE: This filter is made of high quality

paper designed to stop very small parti-

cles of dust. The filter can be used for wet

or dry pick up. Handle the filter carefully

when removing to clean or installing it.

Creases in the filter pleats may occur

from installation but creases will not

affect the performance of the filter.

1.You may remove the top section of the

Wet/Dry Vac as described in Float/

Cage assembly section and dump the

contents into a proper waste disposal

container.

Blowing Feature

Your vac features "Full Blowing". It has

the capability to blow sawdust and other

debris. Follow the steps below to use

your vac as a blower.

WARNING: Always safety gog-

wear

gles complying with ANSI Z87.1

(shown on Package) before com-

mencing operation. Safety Goggles

are available at Sears stores.

WARNING: To avoid injury to bystand-

ers, keep them clear of blowing

debris.

1.Locate blowing port of your vac.

2. Insert soft end of your hose into blow-

ing port.

3. (Optional) Attach extension wand to

swivel end of hose, then place a blower

nozzle on the wand.

4. Turn vac on and you are ready to use

your vac as a blower.

Sears recommended accessories are

available at Sears retail stores. The Sears

Blower Nozzle Stock No. 9-16933 and

extension handles Stock No. 9-16964 are

recommended for blowing debris.

Removal

To remove the filter for cleaning or

replacement, remove filter nut from the

screw on the filter cage, remove filter

plate and lift off filter.

IMPORTANT: To avoid damage to the

blower wheel and motor, always reinstall

the filter before using the vac for dry

material pick-up.

IMPORTANT: After cleaning, check the

filter for tears or small holes. Do not use a

filter with holes or tears in it. Even a small

hole can cause a lot of dust to come out

of your vac. Replace it immediately.

Filter Maintenance (continued)

Dry Filter

NOTE: For best results of cleaning due to

accumulated dust, clean the filter in an

open area. Cleaning SHOULD be done

outdoors and not in the living quarters.

1.Some removal of dry debris can be

accomplished without removing the fil-

ter from the vac by slapping your hand

on top of the lid while the vac is turned

off.

2.After filter removal from vac, remove

the dry debris by gently tapping the fil-

ter against the inside wall of your dust

drum and the debris will loosen and

fall.

3. For thorough cleaning of dry filter with fine

dust (no debris) you may run water

through it as described under "Wet Filter".

Wet Filter

After filter is removed, awet filter should be

cleaned by running water through it from a

hose or spigot. Take care that water pres-

sure from the hose is not strong enough to

damage filter.

Installation

To ensure a proper seal, clean the lid area

where the filter will seat. Slide the new filter

over the filter cage. Replace filter plate then

run filter nut down threads, finger tight only.

Do not overtighten as this will cause defor-

mation or cracks in the filter.

Refer to page 6, "Filter Assembly".

Wet/Dry Vac Maintenance

To keep your Wet/Dry Vac looking its

best, clean the outside with a cloth damp-

ened with warm water and mild soap, to

clean the drum:

1.Dump debris out.

2. Wash drum thoroughly.

3. Wipe out with dry cloth.

WARNING: To assure product SAFETY I

and RELIABILITY, repairs and adjust- I

ment should be performed by Sears

Service Centers, always using Sears

rep acement parts.

NOTE: If your casters are noisy, you may

put a drop of oil on the roller shaft to

make them quieter.

Repair Parts

3-GALLON PORTABLE WET/DRY VAC

Model Number 113.177571

Always order by Part Number - Not by Key Number

Key

No.

Part No.

818982

9-16921

9-17866

9-17861

817254

818977

9-17810

818978

73316

818989-1

9-16936

STD611010

821814

Description

Air Deflector

tUtility Nozzle

tHose

tWands

Float

Filter Cage

tFilter (Purple stripe

Filter Plate

Filter Nut

Drum

tCasters (4)

*Scr. Pn Hd Type "AB"

10xl

Lid

Key

No. Part No.

14 821818

15 73352

16 15534-1

17 818413-3

18 818961

19 821815

20 STD611007

21 818980-1

22 819314-1

23 73180

24 820506

SP5704

Description

Collector

Nut Hx Flange 1/4-20

Washer

Blower Wheel

Spacer

Motor Includes

Key #15 thru 18

*Scr Pn Hd Type "AB"

10 x 3/4

Handle

Cover Motor

Toggle Switch

Gasket Motor

Owner's Manual

tStock Item - May Be Seured Through The Hardware Department Of Most Sears

Retail Stores

*Standard Hardware Item - May Be Purchased Locally.

Inhaltsverzeichnis

Andere Craftsman Staubsauger Handbücher

Craftsman

Craftsman 113.177600 Bedienungsanleitung

Craftsman

Craftsman 113.176110 Bedienungsanleitung

Craftsman

Craftsman CMXEVCVVBVA1612 Bedienungsanleitung

Craftsman

Craftsman 125.12007 Bedienungsanleitung

Craftsman

Craftsman 486.24506 Bedienungsanleitung

Craftsman

Craftsman 125.38907 Bedienungsanleitung

Craftsman

Craftsman 338.179370 Bedienungsanleitung

Craftsman

Craftsman 113.178200 Bedienungsanleitung

Craftsman

Craftsman CMXEVCVVJC507P Bedienungsanleitung

Craftsman

Craftsman 113.177145 Bedienungsanleitung

Craftsman

Craftsman 113.177480 Bedienungsanleitung

Craftsman

Craftsman 113.178490 Bedienungsanleitung

Craftsman

Craftsman 125.12004 Bedienungsanleitung

Craftsman

Craftsman CMXEVBCV945L Bedienungsanleitung

Craftsman

Craftsman 113.177110 Bedienungsanleitung

Craftsman

Craftsman CMXEVXA18115 Bedienungsanleitung

Craftsman

Craftsman 113.177810 Bedienungsanleitung

Craftsman

Craftsman 32724611 - 12 Gal. HP Wet/Dry Vac Bedienungsanleitung

Craftsman

Craftsman 113.177311 Bedienungsanleitung

Craftsman

Craftsman CMXEVBCV1660L Bedienungsanleitung

Craftsman

Craftsman 125.16819 Bedienungsanleitung

Craftsman

Craftsman 17741 - 6 Gal. Wet-Dry VAC Bedienungsanleitung

Craftsman

Craftsman CMCV002B Bedienungsanleitung

Craftsman

Craftsman 247.770990 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung