Craftsman 113.179715 Bedienungsanleitung

owner's

manual

MODEL NO.

113.179715

Serial

Number

Model and serial

numbers may be

found below the

handle. You should

record both model

and serial numbers in

a safe place for future

use.

AWARNING:

FOR YOUR

SAFETY,

READ ALL

INSTRUCTIONS

CAREFULLY

SAVE THIS

MANUAL

FOR FUTURE

REFERENCE J

T ®

20 GALLON

WET/DRY VAC

•safety

•assembly

•operation

•maintenance

•repair parts

•Espafiol - pagina 19

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

Part No. SP6742 Printed in Mexico

Warranty

Craftsman One Year Full Warranty

If this Craftsman product fails due to a defect in material or workmanship

within one year from the date of purchase, return it to any Sears store,

Sears Service Center, or other Craftsman outlet in the United States for

free repair (or replacement if repair proves impossible).

This warranty applies for only 90 days from the date of purchase if this

product is ever used for commercial or rental purposes.

This warranty does not include bags or filters, which are expendable

parts that can wear out from normal use within the warranty period.

This warranty gives you specific legal rights, and you may also have

other rights, which vary, from state to state.

Sears, Roebuck and Co., Hoffman Estates, IL 60179

IMPORTANT SAFETY INSTRUCTIONS

Safety is a combination of using common

sense, staying alert, and knowing how

your Wet/Dry Vacuum cleaner ("Vac")

works.

Safety Signal Words

DANGER: Indicates a hazardous

situation which, if not avoided, will result

in death or serious injury.

_, WARNING: Indicates a hazardous

situation which, if not avoided, could

result in death or serious injury.

CAUTION: Indicates a hazardous

situation which, if not avoided, could

result in minor or moderate injury.

When using your Vac, always follow basic

safety precautions including the following:

WARNING- To reduce

the risk of fire, electric shock, or injury:

•Read and understand this manual and

all labels on the Vac before operating.

• Use only as described in this manual.

• Do not leave Vac running while

unattended - you may fail to notice

important signs indicating abnormal

operation such as loss of suction,

debris/liquid exiting exhaust, or abnormal

motor noises. Immediately stop using

Vac if you notice these signs.

• Do not leave Vac while plugged in.

Unplug from outlet when not in use and

before servicing.

• Sparks inside the motor can ignite

flammable vapors or dust. To reduce the

risk of fire or explosion, do not use near

combustible liquids, gases, or dusts, such

as gasoline or other fuels, lighter fluid,

cleaners, oil-based paints, natural gas,

coal dust, magnesium dust, grain dust,

aluminum dust, or gun powder.

• Do not vacuum anything that is burning

or smoking, such as cigarettes,

matches, or hot ashes.

• Do not vacuum drywall dust, cold

fireplace ash, or other fine dusts with

standard filter. These may pass through

the filter and be exhausted back into the

air. Use a fine dust filter instead.

• To reduce the risk of inhaling toxic

vapors, do not vacuum or use near

toxic or hazardous materials.

• To reduce the risk of electric shock, do

not expose to rain or allow liquid to enter

motor compartment. Store indoors.

• Do not allow to be used as a toy. Close

attention is necessary when used by or

near children.

• Do not use with a torn filter or without

filter installed except when vacuuming

liquids as described in this manual.

Dry debris ingested by the impeller

may damage the motor or be

exhausted into the air.

• Turn off Vac before unplugging.

• Toreducetheriskofinjuryfrom

accidentalstarting,unplugpowercord

beforechangingorcleaningfilter.

• Donotunplugbypullingoncord.To

unplug,grasptheplug,notthecord.

• Donotusewithdamagedcord,plugor

otherparts.IfyourVacisnotworkingasit

should,hasmissingparts,hasbeen

dropped,damaged,leftoutdoors,or

droppedintowater,callcustomerservice.

• Donotpullorcarrybycord,usecord

ashandle,closeadooroncord,orpull

cordaroundsharpedgesorcorners.

DonotrunVacovercord.Keepcord

awayfromheatedsurfaces.

• Donothandleplug,switch,ortheVac

withwethands.

• Donotputanyobjectintoventilation

openings.Donotvacuumwithany

ventilationopeningsblocked;keepfree

ofdust,lint,hairoranythingthatmay

reduceairflow.

• Keephair,looseclothing,fingers,and

allpartsofbodyawayfromopenings

andmovingparts.

• Toreducetheriskoffalls,useextra

carewhencleaningonstairs.

• Toreducetheriskofbackinjuryor

falls,donotliftaVacthatisheavywith

liquidordebris.Partiallyemptyby

scoopingdebrisordrainingliquid.

• Toreducetheriskofpersonalinjuryor

damagetoVac,useonlyCraftsman

recommendedaccessories.

• Whenusingasablower:

Directairdischargeonlyatworkarea.

Donotdirectairatbystanders.

Keepchildrenawaywhenblowing.

Donotuseblowerforanyjobexcept

blowingdirtanddebris.

Donotuseasasprayer.

Wearsafetyeyewear.

• Toreducetheriskofeyeinjury,wear

safetyeyewear.Theoperationofany

utilityVacorblowercanresultin

foreignobjectsbeingblownintothe

eyes,whichcanresultinsevereeye

damage.

• Toreducetheriskofbeingstruckby,or

pulleddownby,arollingVac,blockthe

casterswhenusingonanyunevenor

slopedsurface.

ThisVacisdouble-insulated,

eliminatingtheneedforaseparate

groundingsystem.Useonlyidentical

replacementparts.Readthe

instructionsforServicingDouble-

InsulatedWet/DryVacs.

Useonlyextensioncordsthatarerated

foroutdooruse.Extensioncordsinpoor

conditionortoosmallinwiresizecan

posefireandshockhazards.Toreduce

theriskofthesehazards,besurethe

cordisingoodconditionandthatliquid

doesnotcontacttheconnection.Donot

useanextensioncordwithconductors

smallerthan16gauge(AWG)insize.

Toreducepowerloss,usea14gauge

extensioncordif25to50ftlongand

12gaugefor50ftorlonger.

,_k CAUTION:

• To reduce the risk of hearing damage,

wear ear protectors when using for

extended time or in a noisy area.

• For dusty operations, wear dust mask.

• Static shocks are common when the

relative humidity of the air is low.

Vacuuming fine debris with your Vac

can deposit static charge on the hose

or Vac. To reduce the frequency of

static shocks in your home or when

using this Vac, add moisture to the air

with a humidifier.

Observe the following warnings that

appear on the motor housing of your Vac:

"] OUBLE INSULATED

GROUNDING NOT REQUIRED.

WHEN SERVICING USE ONLY

IDENTICAL REPLACEMENT PARTS.

,_, WARNING: For your own safety,

read and understand owners manual.

Do not run unattended. Do not pick up

hot ashes, coals, toxic, flammable or

other hazardous materials. Do not use

around expos ve qu ds or vapors.

WARNING: To reduce the risk of [

electric shock - do not expose to rain -

store indoors.

SAVE THIS MANUAL

Introduction

This Wet/Dry Vac is intended for house-

hold use. It may be used for vacuuming of

wet or dry media and may be used as a

blower.

Read this owner's manual to familiarize

yourself with the product features and to

understand the specific usage of your new

Wet/Dry Vac.

Table of Contents

Section Page

Warranty ........................ 2

Important Safety Instructions ......... 2

Introduction ...................... 4

Table of Contents ................. 4

Assembly ........................ 5

Carton Contents ................. 5

Drum/Wheel Assembly ............ 6

Installing Handle ................. 7

Removing Handle ................ 7

Installing Accessory Storage Bag ... 7

Vac Assembly ................... 8

Insert Hose ..................... 8

Accessory Storage ............... 8

Operation ........................ 9

Polarized Plug .................. 9

Vacuuming Dry Materials .......... 9

Section Page

Vacuuming Liquids .............. 10

Emptying the Drum ............. 10

Blowing Feature ................ 11

Maintenance .................... 12

Filter ......................... 12

Filter Cleaning ................. 12

Filter Removal and Replacement... 12

Cleaning a Dry Filter ............ 13

Cleaning a Wet Filter ............ 13

Cleaning and Disinfecting

the Wet/Dry Vac .............. 13

Casters ....................... 13

Storage ....................... 13

Repair Parts ..................... 14

Assembly

Remove entire contents of carton. Check

each item against the Carton Contents

List. Notify your Sears Store or Sears

Service Center immediately if any parts

are damaged or missing.

Carton Contents List

Key Description ............. Qty.

A Vac Assembly .............. 1

B Pos-I-Lock® Premium Hose...1

C Utility Nozzle ............... 1

D Wet Nozzle ................ 1

E Car Nozzle ................ 1

F Crevice Tool ............... 1

G Extension Wands ........... 2

H Caster Foot For Storage ...... 2

I 8" Wheel .................. 2

J Shaft ..................... 1

K Foot Wheel, Right ........... 1

L Foot Wheel, Left ............ 1

M Metal Handle .............. 1

N Accessory Storage Bag ...... 1

O Diffuser ................... 1

P Disposable Filter Bag ........ 1

Q Loose Parts Bag ............ 1

1. 2" Caster ............... 2

2. 1/2" Cap Nut ............ 2

3. Wheel Caps ............. 2

4. Screw .................. 4

5. Owner's Manual ......... 1

& JJ

Tools Required

Phillips

Mallet Screwdriver

Assembly (continued)

Drum/Wheel Assembly

If any parts are missing or damaged

contact Sears Customer Service.

Do not assemble until you have all the

parts.

1. Insert rear wheel foot (left) and rear

wheel foot (right) into the bottom of

drum as shown. Check to make sure

axle holes align. Light taps with a

mallet or hammer may be needed to

fully seat both wheel feet. Insert two

front caster feet.

Front

Caster

Foot

Rear

Wheel

Foot

HOLES(Right)

ALmGN

Front

Caster

Foot

2. Install (4) #10 x 1-3/4" screws into

matching holes on both wheel feet and

front caster feet, securing them to the

bottom of the drum. Tighten screws

until just snug. Do not over tighten as

this may tend to deform the feet.

#10 x 1=3/4"

Screw (4)

3. Installing Cap Nut

a. Place cap nut on end of axle.

b. Tap gently with hammer until fully

seated.

c. Place wheel on the axle with

smooth portion of wheel facing

outward.

Rear Wheel Foot

(Right)\ Drain

End

Cap

Nut

Wheel

Foot (Left)

w/Wheel

NOTE: Smooth side of the

wheel to the outside.

4. Slide open end of axle through left rear

wheel foot hole. Slide all the way

through the hole in the right rear wheel

foot. Light taps with a mallet may be

required to fully insert axle.

5. Install second wheel onto axle with

smooth portion of wheel facing

outward.

6. Install the second cap nut. Tap gently

until cap nut is firmly seated

Wheel

Foot

Caster

Foot

Assembly (continued)

7. Using a rubber mallet or hammer,

gently tap the wheel cap onto the right

wheel until the wheel cap is firmly

seated onto the wheel. This is required

on both left and right sides.

Wheel

Cap

8. Insert the caster stem into the socket of

the caster foot as shown. (Front caster

only).

9. Push on the caster until the ball on the

caster stem is inserted all the way into

the socket. You will be able to hear the

ball snap into the socket and the caster

will swivel easily when positioning is

correct.

CaSter Stern

aster Ball

Socket

Installing Handle

Press and hold release buttons while

installing handle into handle receptacles

in drum (See following illustration).

NOTE: An audible snap of release

buttons indicates successful engagement

of handle.

Release Buttons

Removing Handle

Press and hold release buttons as

shown. While firmly pushing in release

buttons, pull handle upwards to remove

(see illustration).

Installing Accessory Storage

Bag

1. Install accessory storage bag as

shown.

Bag zStorag e Bag

(4)

Handle

Assembly (continued)

Vac Assembly

1. Line up front (label and switch side) of

power assembly with drain cap and Vac

port located on the front of the drum.

Note: Power assembly must be aligned

with drum for proper attachment.

2. Place power assembly on top of drum.

3. Be sure power assembly completely

covers the top of the drum so leakage

does not occur.

4. Upon releasing flexible latches, the

power assembly will attach to the drum.

5. To remove the power assembly, lift up

on the flexible latches and remove from

drum.

Power

Accessory Storage

Your accessories may be stored in the

accessory storage bag, or in the two

locations on the power head assembly.

Accessories

Storage

Location

-- OR --

Wand

Storage

Bag

Flexible

Latch

Vacuum Drain

Port

Insert Hose

Insert the hose locking end of the "Pos-I-

Lock®" Premium hose into the inlet of the

Vac. The hose should snap into place. To

remove the hose from the Vac, press the

release button in the hose assembly and

pull the hose out of the Vac inlet, as

shown.

The hose may be stored by wrapping it

around the unit and plugging the open

end into one of the storage locations on

the caster feet or in the storage bag.

Open End

Of Hose

Hose

Button

End Of Hose

-- OR --

j Hose Storage

Storage

Bag

Operation

_, WARNING: To reduce the risk of fire, explosion, or damage to Vac:

•Do not leave Vac running while unattended - you may fail to notice important signs indicating

abnormal operation such as loss of suction, debris/liquid exiting exhaust, or abnormal motor

noises. Immediately stop using Vac if you notice these signs.

• Do not leave Vac plugged-in when not in use.

• Do not continue running when float has cut off suction.

• Do not operate Vac in areas with flammable gases, vapors or explosive dust in the air.

Sparks inside the motor can ignite airborne flammables. Flammable gases and vapors

include: lighter fluid, solvent-type cleaners, oil-based paints, gasoline,

alcohol, or aerosol sprays. Flammable dusts include: coal, magnesium, aluminum, grain, or

gun powder.

• Do not vacuum up explosive dusts, flammable liquids, or hot ashes.

• Do not use Vac as a sprayer.

,_ WARNING: To reduce the risk of electric shock or injury:

• Do not expose to rain or allow liquid to enter motor compartment. Store indoors.

• Do not handle plug, switch, or Vac with wet hands.

• Do not service Vac while it is plugged-in. If your Vac is not working as it should, has missing

parts, has been dropped, damaged, left outdoors, or dropped into water, return it to an

independent service center or call customer service.

• When using an extension cord, use only outdoor-rated cords that are in good condition.

Do not allow the connection to come into contact with liquid.

• Do not vacuum toxic materials to reduce the risk of inhaling the vapors or dust.

Polarized Plug

To reduce the risk of electric shock, this

appliance has a polarized plug (one

blade is wider than the other). This plug

will fit in a polarized outlet only one way.

If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install the

proper outlet. Do not change the plug in

any way.

After you plug the power cord into the

outlet, turn the unit on by pushing the

switch from position "0" to position "1".

The symbols used on the switch actuator

are international "On & Off" symbols. "0"

is the symbol for "OFF" and "1"is the

symbol for "ON".

="OFF" I=''ON''

Vacuuming Dry Materials

1. The filter must always be in correct

position to reduce the risk of leaks and

possible damage to Vac.

2. When using your Vac to pick up very

fine dust, it will be necessary for you to

empty the drum and clean the filter at

more frequent intervals to maintain

peak Vac performance.

NOTE: A dry filter is necessary to pick up

dry material. If you use your Vac to pick

up dust when the filter is wet, the filter will

clog quickly and be very difficult to clean.

Dry the filter before storing.

The optional Craftsman HEPA Rated

Material Filter, stock number 17912 will

do a better job stopping the very fine

particles than the 17816 filter.

Operation (continued)

Vacuuming Liquids

_, WARNING: Do not operate

without filter cage and float, as they

prevent liquid from entering the

impeller and damaging the motor.

1. When picking up small amounts of

liquid the filter may be left in place.

2. When picking up large amounts of

liquid we recommend that the filter be

removed. If the filter is not removed, it

will become saturated and misting may

appear in the exhaust.

3. When the liquid in the drum reaches a

predetermined level, the float

mechanism will rise automatically to cut

off air-flow. When this happens, turn off

the Vac, unplug the power cord, and

empty the drum. You will know that the

float has risen because Vac airflow

ceases and the motor noise will

become higher in pitch, due to

increased motor speed.

4. After using the Vac to pick up liquids,

the filter must be dried to reduce the

risk of possible mildew and damage to

the filter.

IMPORTANT: To reduce the risk of

damage to the Vac do not run motor with

float in raised position.

Emptying the Drum

1. Remove the power assembly. Push

down and pull out the flexible locking

tabs to release from drum.

2. While holding the locking tabs out, lift

the power assembly up and away from

the drum.

3. Lay power assembly upside down on a

clean area while emptying drum.

4. Dump the drum contents into the

proper waste disposal container.

5. The Vac comes equipped with a drain

for easy emptying of liquids. Simply

unscrew the drain cap and lift the

opposite side slightly to empty the

drum.

WARNING: To reduce the risk of

back injury or falls, do not lift a Vac

heavy with liquid or debris. Scoop or

drain enough contents out to make the

Vac light enough to lift comfortably.

Andere Handbücher für 113.179715

Inhaltsverzeichnis

Sprachen:

Andere Craftsman Staubsauger Handbücher

Craftsman

Craftsman 113.177135 Bedienungsanleitung

Craftsman

Craftsman CMXEVCVVJC507P Bedienungsanleitung

Craftsman

Craftsman 338.17920 Bedienungsanleitung

Craftsman

Craftsman 113.179492 Bedienungsanleitung

Craftsman

Craftsman CMCVS001D1 Bedienungsanleitung

Craftsman

Craftsman 113.179715 Bedienungsanleitung

Craftsman

Craftsman CMXEVXA18115 Bedienungsanleitung

Craftsman

Craftsman CMXEVBE172500 Bedienungsanleitung

Craftsman

Craftsman 113.177135 Bedienungsanleitung

Craftsman

Craftsman 125.12005 Bedienungsanleitung

Craftsman

Craftsman 315.115710 Bedienungsanleitung

Craftsman

Craftsman 113.170330 Bedienungsanleitung

Craftsman

Craftsman CMXEVCVVJH1612 Bedienungsanleitung

Craftsman

Craftsman 125.16825 Bedienungsanleitung

Craftsman

Craftsman 315.177530 Bedienungsanleitung

Craftsman

Craftsman CMXEVBE179250 Bedienungsanleitung

Craftsman

Craftsman 338.179370 Bedienungsanleitung

Craftsman

Craftsman 113.177260 Bedienungsanleitung

Craftsman

Craftsman 486.24506 Bedienungsanleitung

Craftsman

Craftsman 113.177360 Bedienungsanleitung

Craftsman

Craftsman 113.177846 Bedienungsanleitung

Craftsman

Craftsman 315.114460 Bedienungsanleitung

Craftsman

Craftsman CMXEVBCV1260L Bedienungsanleitung

Craftsman

Craftsman 125.38909 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung