CTA PAD-SCGS Bedienungsanleitung

Compact Security Gooseneck Floor Stand

PAD-SCGS

INSTRUCTION - MANUAL

888-733-4448

CONTENTS:

1. Attaching Foam Pad to Tablet Holder

Select the appropriate foam pad (N) according to the

thickness of your tablet (or tablet in its case), then

press adhesive side into center of tablet holder.

2. Installing the Swivel Casters

INSTRUCTIONS:

2a. Place a

spring washer (I)

over the screw

bolt on each

caster (E).

2b. Place the

screw bolt from

each wheel (E)

through the

metal base (C),

then place a nut

cover (H) over

the top of each.

Screw down

clockwise by

hand, then use

wrench (G) to

tighten further.

Wheel

Screw Nut Cover

Spring

Washer

Metal

Base

Use this table to determine the

appropriate foam pad to use

with your tablet.

Note: sizes refer to total tablet

size with or without a case.

Foam Pad

Thickness

Tablet

Thickness:

1mm 0.67-1.06in

5mm 0.51-0.91in

10mm 0.31-0.71in

17-27mm

13-23mm

8-18mm

1mm Foam Pad

5mm

Foam Pad 10mm

Foam Pad

Bx1

x4 x4

G N

888-733-4448

Metal connection

Height

Adjustment

Knob

Pole (B)

Metal

Cross Base (C) x2

Connection Screw Bolt (K),

Washers (L) and Nut (M)

Pole Assembly and Pole Nut

Cross Base Sections (2)

Allen Key (J)

3a. Place the metal base of the base pole (B)

with the higher piece on top of the cross

base (C). Align the holes at the bottom of the

pole (B) with the holes on the cross base (C).

3b. Insert a screw bolt (K) with a

washer (L) into each of 4 holes.

Place another washer (L) on the

underside of each screw bolt. Grip

the nut (M) on the underside with

one hand, and use the other tighten

each screw with the allen key tool

(J). Repeat for all four screw bolts.

3. Base Assembly and Connecting the Metal Cover

3c. Rotate the grip counter

clockwise to loosen

completely and remove from

the top of the pole.

3e. Place the grip back over

the stand pole (B) and rotate

clockwise until securely

tightened.

3d. Place the square metal

cover (D) over the top of the

pole (B) and slide down to

the stand base.

4. Connecting Gooseneck

Holder & Battery Case

5. Installing Tablet Device

Adjusting the Floor Stand

4a. Place battery

case (F) over top of

metal connection.

Note: if the Y screw

is already in,

unscrew before

attaching the

gooseneck.

4b. Screw the

gooseneck onto the

metal connection of

the pole by turning

clockwise. Be sure

that the battery case

is on the opposite

side of the pole as

the Y screw.

5a. Insert key (O) and set

position to unlock. Remove key,

then slide holder (A) open.

Tighten and loosen

the holder connection

screw to adjust ease

of rotation.

Adjust the gooseneck

to desired position.

Rotate plastic grip to

loosen, then adjust

pole to desired height.

Rotate back to tighten.

5b. Load tablet corner first into

one end. Insert key and set to

lock, the slide holder shut until

secured. Remove key.

4c. Turn the Y screw

clockwise to tighten

the connection.

Y Screw

Andere CTA Rack & Stand Handbücher

CTA

CTA PAD-CFWM Bedienungsanleitung

CTA

CTA PAD-VADMWE Bedienungsanleitung

CTA

CTA LT-LFSDM Bedienungsanleitung

CTA

CTA PAD-2VDMWA Bedienungsanleitung

CTA

CTA PAD-PARAF1 Bedienungsanleitung

CTA

CTA ADD-USGTWP Bedienungsanleitung

CTA

CTA PAD-PARAF1GT Bedienungsanleitung

CTA

CTA PAD-SWM Bedienungsanleitung

CTA

CTA PAD-CHKWM10 Bedienungsanleitung

CTA

CTA ADD-PARAFSV Bedienungsanleitung

CTA

CTA PAD-HSKSBAE Bedienungsanleitung

CTA

CTA PAD-PARAFDC Bedienungsanleitung

CTA

CTA PAD-UAM Bedienungsanleitung

CTA

CTA PAD-SSMA Bedienungsanleitung

CTA

CTA PAD-UGT Bedienungsanleitung

CTA

CTA AUT-VDMC Bedienungsanleitung

CTA

CTA ADD-FS2VDMB Bedienungsanleitung

CTA

CTA PAD-CHKBM10 Bedienungsanleitung

CTA

CTA PAD-SWM Bedienungsanleitung

CTA

CTA PAD-CHKB Bedienungsanleitung

CTA

CTA PAD-ASK13B Bedienungsanleitung

CTA

CTA PAD-WMAB Bedienungsanleitung

CTA

CTA ADD-ADMA Bedienungsanleitung

CTA

CTA ADD-PARAFS Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung