Curt Group 51189 Bedienungsanleitung

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •51189-INS-RA •01/13/2021 •PAGE 1

Product Registration and Warranty

CURT stands behind our products with

industry-leading warranties. To get copies

of the product warranties, register your

purchase or provide feedback, visit:

warranty.curtgroup.com/surveys

INSTALLATION MANUAL 51189

Tools Required

None

Product Photo Echo®Mobile Brake Controller (not included)

Maintenance

This button uses a CR2032 coin cell battery.

Periodic inspection should be performed

to ensure there is no visible damage.

NOTICE

Before you begin installation, read all instructions thoroughly.

All steps must be followed to ensure the product will function properly. Once installed,

test for proper function by using a test light or connecting a properly wired trailer.

Battery life will be shortened with heavy usage and / or use in extreme conditions.

Do not use product in temperatures below -4°F (-20°C) or above 129.2°F (54°C).

This button is rated as splash-proof only. Do not submerge or attempt to use under water

as this will result in irreversible damage that is outside our warranty coverage.

Clean with a damp cloth and do not use chemical or abrasive cleaning products.

WARNING

This device contains a battery composed of lithium, organic solvents and

other combustible materials. Improper handling of the battery could lead

to distortion, leakage, overheating, explosion or fire, causing personal injury.

Never swallow, charge, heat, expose to open flames, moisture or liquid.

Never attempt to disassemble, reverse the polarity or short circuit.

CAUTION

When disposing of used batteries, remove the batteries in advance. If not possible,

dispose entire product in a waste bin specific for electronics, as per the WEEE directive.

Follow any national or local regulations for battery disposal that apply to your area.

This button is not a toy. It contains small parts and accessories

that present a choking hazard. Keep away from children or pets.

Do not attempt to service this product.

Level of Difficulty

Easy

Installation difficulty levels are based on time

and effort involved and may vary depending on

the installer level of expertise, condition of the

vehicle and proper tools and equipment.

Parts List

Qty Description

1Echo®manual override button

1Reusable adhesive sticker

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •51189-INS-RA •01/13/2021 •PAGE 2

Step 1

Follow the instructions included with your

Echo®mobile brake controller on how to

install the unit and pair it to the app.

Once the Echo®mobile brake controller

is paired to your device, select the menu

button in the upper left corner of the app.

Select the 'Echo®Manual Override Button'

option from this screen.

Step 2

Select the 'Start Scan' button in the app.

While the app is scanning, press and

hold the manual override button to pair.

If at any point, you want to stop

the scan, press the 'Stop Scan' button.

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •51189-INS-RA •01/13/2021 •PAGE 3

Step 4

With the button paired to your phone,

a status bar will appear on the manual

override screen. You will see a green or

red dot showing the connections status.

Connected Disconnected

The override button will continue to operate

on any screen within the app or if the device

screen is off, as long as the app is still running.

However, you will only have visibility of the

manual brake activation ring, displaying the

stopping power being applied to the brakes

while on the 'Active Profile' screen.

If you close and reopen the app, you must

press the override button to reactivate

and pair to your phone again.

As you press the override button, the

brake activation ring will show stopping

power being applied to the brakes.

The notification 'Brakes Being Applied'

will appear in the center of the ring.

Step 3

The notification 'The Echo®Manual Override

Button has been added' will appear if pairing

is successful. Select 'OK' to complete pairing.

If the notification 'Device Not Found'

appears, pairing was unsuccessful

and you will need to repeat step 3.

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •51189-INS-RA •01/13/2021 •PAGE 4

Step 5

To view the connection status, battery level

and other details of the override button, select

'Echo®Manual Override Button' from the menu

in the upper left corner of the screen.

Step 6

From the 'Manual Override Button'

screen, you can change the

nickname of your override button.

To edit the nickname of the button, select the

'Edit Nickname'. Type in the desired name for

your override button and select 'OK' to finalize.

CURTMFG.COM •PRODUCT SUPPORT: 877.287.8634 •51189-INS-RA •01/13/2021 •PAGE 5

Step 8

Locate a suitable mounting location for the

override button inside the vehicle. Clean the

mounting surface prior to adhering the button.

The override button comes with a

reusable adhesive sticker on the base.

Peel off the protective film and mount

the button in an safe and convenient

place to operate while driving.

WARNING

Do not place the button over vehicle

safety devices such as air bags,

vehicle indicators or displays.

If you want to change the position of the

button, you can remove it by peeling the button

along with the adhesive off of the surface.

NOTICE

Be sure to peel rather than pull when removing

the override button and adhesive to avoid

damage to the mounting surface.

To clean your reusable adhesive, remove

it from the button's base and rinse with

water. Rub carefully and rinse again.

NOTICE

Do not apply solvents, chemicals

or abrasive cleaning products as

this will damage the adhesive.

Let the adhesive air-dry and it will return to

its initial state and be ready to adhere again.

Step 7

To disconnect the override button,

select 'Disconnect / Forget'

Note: The device can only connect to

one override button at a time. If you

wish to connect to another override button,

you must disconnect the current button.

Select 'Yes' to complete the disconnect.

The override button can only be connected

to one device at a time, but it can be set

up on several devices. If multiple devices

in the area have a connection to the same

override button, you will need to make

sure the bluetooth is turned off on

all undesired devices when pairing.

Reference step 5 on how to check the

connection status of the override button.

Dieses Handbuch passt für folgende Modelle

Andere Curt Group Autozubehör Handbücher

Curt Group

Curt Group 16190 Bedienungsanleitung

Curt Group

Curt Group Retrac 206820 Bedienungsanleitung

Curt Group

Curt Group Aries S225045-2 Bedienungsanleitung

Curt Group

Curt Group 11392 Bedienungsanleitung

Curt Group

Curt Group Liverne 401801 Bedienungsanleitung

Curt Group

Curt Group 13458 Bedienungsanleitung

Curt Group

Curt Group RETRAC 207770 Bedienungsanleitung

Curt Group

Curt Group Retrac 207700 Bedienungsanleitung

Curt Group

Curt Group 3025121 Bedienungsanleitung

Curt Group

Curt Group 45143 Bedienungsanleitung

Curt Group

Curt Group ARIES S224046 Bedienungsanleitung

Curt Group

Curt Group ARIES 2051132 Bedienungsanleitung

Curt Group

Curt Group 18118 Bedienungsanleitung

Curt Group

Curt Group Retrac 207800 Bedienungsanleitung

Curt Group

Curt Group 40247 Bedienungsanleitung

Curt Group

Curt Group UWS TBV-49 Bedienungsanleitung

Curt Group

Curt Group Aries TrailCrusher 2156002 Bedienungsanleitung

Curt Group

Curt Group 3025101 Bedienungsanleitung

Curt Group

Curt Group 13415 Bedienungsanleitung

Curt Group

Curt Group Aries AL235045 Bedienungsanleitung

Curt Group

Curt Group 18320 Bedienungsanleitung

Curt Group

Curt Group Aries 2055115 Bedienungsanleitung

Curt Group

Curt Group TruTrack 17500 Bedienungsanleitung

Curt Group

Curt Group Aries 3025175 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung