CYP CPRO-U8T Bedienungsanleitung

CPRO-U8T

1 by 8 4K UHD HDMI Splitter

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means

- electronic, mechanical, magnetic, optical, chemical, manual,

or otherwise - without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

RDV1 16/08/16 Preliminary Release

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6. Operation Controls and Functions....... 3

6.1 Front Panel ........................................3

6.2 Rear Panel.........................................4

7. Connection Diagram ............................ 4

8. Specications ........................................ 5

8.1 Technical Specications .................5

8.2 Supported Resolutions.....................6

1. INTRODUCTION

This 1 by 8 4K UHD HDMI Splitter is an advanced solution for splitting

and distributing a single HDMI input to 8 HDMI outputs. It provides a

high level of audio and video performance with support for resolutions

up to 4K@60Hz (YUV4:2:0) resolution and high denition digital audio

formats such as LPCM 7.1CH with audio sampling rates up to 192kHz,

Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master

Audio. Additionally, the System Reset function allows the unit to

change the input selection on any connected, CEC enabled, TVs to

the input the unit is currently connected to automatically.

2. APPLICATIONS

• Classroom and Lecture Hall Presentations

• Showrooms and Demo Rooms

• Hotel Lobby information Displays

• Public Commercial Displays

3. PACKAGE CONTENTS

• 1 by 8 HDMI splitter

• 5V/2.6A DC Power Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI source equipment such as media players, video game

consoles or set-top boxes.

• HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

• The use of “Premium High Speed HDMI” cables id highly

recommended.

5. FEATURES

• HDMI 2.0 and DVI 1.0 compliant

• HDCP 1.4 compliant

• 1 HDMI input and 8 HDMI outputs

• System reset function (CEC active source command)

• Simultaneous display of a single Ultra High-Denition source on up to

8 4K UHD TV displays

• 3D signal support(with 3D source and compatible 3D TV)

• Supports 4K UHD resolutions up to 4096x2160@60Hz(YUV4:2:0, 8 bit)

• Pass-through high denition audio: including LPCM up to 7.1, Dolby

Digital, DTS

• Pass-through of high denition audio including LPCM up to 7.1,

Dolby Digital, DTS, Dolby TrueHD, Dolby Atmos and DTS-HD Master

Audio

• EDID management control including Standard mode and TV mode

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWER

OUT OUT

EDID SYS-RST

ON OFF

SERVICE

1234 5678

STDTV

1 2 3 2 4 5 6

1Power: This LED will illuminate when the device is connected to an

active power supply.

2OUT LED 1~8: When output detected, the LED will illuminate, and

when output is not connected, the LED will off.

3IN: When input detected, the LED will illuminate. When input is not

connected, the LED light will be off.

4SYS-RST: Switch the dip switch from off to on, the unit will trigger

TV to its HDMI input immediately, when stays in on, the unit will

trigger the system in every 8~10 minutes. (*The purpose of reset is

to guarantee all outputs are displaying the corresponding image.

For example, at the display side user may switch to different HDMI

input or select other sources and this reset function will force the

display to switch back to its HDMI input. TV/displays shall support

CEC function in order to perform this function successfully.)

5EDID: Switch the dip switch to choose EDID mode to Standard

(STD) or TV mode. When on TV mode, the unit will automatically

detect and store output 1 sink EDID data. Switch to STD mode and

reboot the unit, the unit will search the suitable resolution out of

all connected display with video standard at 1080p and audio

standard at LPCM 2 channel.

6SERVICE: This is reserved for rmware update use only.

6.2 Rear Panel

DC 5V

OUT OUT

1234

5678

1 2 3 2

1DC 5V: Plug the 5V DC power adapter into the unit and connect it

to an AC wall outlet for power.

2OUT 1~8: Connect to HDMI TVs, monitors or ampliers for digital

video and audio output.

3IN: Connect to HDMI source equipment such as a media player,

game console or set-top box.

7. CONNECTION DIAGRAM

DC 5V

OUT OUT

1234 5678

HDMI TV/Display

Blu-Ray/PS4 Player

Projector

HDMI IN

Simultaneous HDMI OUT

Power Supply

8. SPECIFICATIONS

8.1 Technical Specications

Video Bandwidth 300MHz/9Gbps

Input Ports 1× HDMI

1× USB(Service)

Output Ports 8 × HDMI

Supported Resolutions VGA~WUXGA

480i~1080p@60Hz

4K@24/25/30Hz (4:4:4)

4K@50/60Hz (YUV4:2:0)

HDMI Cable I/O Distance* 5M (4K@60Hz, YUV4:2:0, 8-bit)

15M (1080p@60Hz, 8-bit)

Power Supply 5V/2.6A DC (US/EU standards, CE/FCC/

UL certied)

ESD Protection Human Body model:

± 8kV (air-gap discharge)

± 4kV (contact discharge)

Chassis Material Metal

Silkscreen Color Black

Dimensions 260mm × 22mm × 68mm (W×H×D)

[Case Only]

260mm × 26mm × 76.5mm (W×H×D)

All Inclusive]

Weight 488 g

Operating Temperature 0˚C~40˚C / 32˚F ~ 104˚F

Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F

Relative Humidity 20 ~ 90% RH (no condensation)

Power Consumption 3.63 W

Andere Handbücher für CPRO-U8T

Inhaltsverzeichnis

Andere CYP Kabel und Steckverbinder Handbücher

CYP

CYP CLUX-1H8CAT Bedienungsanleitung

CYP

CYP CHDBX-1H1CE Bedienungsanleitung

CYP

CYP CLUX-2 Bedienungsanleitung

CYP

CYP CHDBT-1H2CE Bedienungsanleitung

CYP

CYP CLUX-18W Bedienungsanleitung

CYP

CYP DT-12 Bedienungsanleitung

CYP

CYP CHDBT-1H1CE Bedienungsanleitung

CYP

CYP CMDP-13MDPI Bedienungsanleitung

CYP

CYP CPRO-U4T Bedienungsanleitung

CYP

CYP DT-12 Bedienungsanleitung

CYP

CYP CDVI-4S Bedienungsanleitung

CYP

CYP qu-2-4k22 Bedienungsanleitung

CYP

CYP CSDI-42 Bedienungsanleitung

CYP

CYP PU-1H7HBTPL Installationshandbuch

CYP

CYP CPLUS-V8E Bedienungsanleitung

CYP

CYP CDPS-4S2HSS Bedienungsanleitung

CYP

CYP CLUX-12E Bedienungsanleitung

CYP

CYP CDPS-UA1H10HS Bedienungsanleitung

CYP

CYP CHDBT-1H7CE Bedienungsanleitung

CYP

CYP CPRO-8ER Bedienungsanleitung

CYP

CYP CLUX-12CEC Bedienungsanleitung

CYP

CYP CLUX-14E Bedienungsanleitung

CYP

CYP PUV-1H4HPL-AVLC Bedienungsanleitung

CYP

CYP CPLUS-V4E Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Data Stream 8 Bedienungsanleitung