CYP CDVI-513TXL Bedienungsanleitung
CDVI-513TXL/RXL
DVI over CAT5e/6 Extender
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2012 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 04/10/12 Preliminary Release
CONTENTS
1. Introduction................................................. 1
2. Applications................................................ 1
3. Package Contents ..................................... 1
4. System Requirements................................. 1
5. Features....................................................... 2
6. Operation Controls and Functions............ 3
6.1 Transmitter Front and Rear Panels....... 3
6.2 Receiver Front and Rear Panels .......... 4
6.3 Transmitter and Receiver Top Panels.. 4
7. Connection Diagram ................................. 5
8. Specications ............................................. 6
9. Acronyms .................................................... 7
1
1. INTRODUCTION
The DVI Extender over single CAT5e/6 allows for a more efcient
system setup and is easy to install.
Uncompressed video and audio can be transmitted to distances of
up to 60 meters at 1080p and 3D with High-Denition Audio up to 7.1CH
(with HDMI to DVI adaptor).
Designed with HDBaseT technology for greater exibility in custom
installations with full DVI signal transfer over a single CAT5e/6 cable.
2. APPLICATIONS
• Residential entertainment Installations
• University lecture room display
• Retail sales display
• Meeting room presentation
• Commercial advertising display
3. PACKAGE CONTENTS
• 1×DVI over CAT5e/6 Transmitter
• 1×DVI over CAT5e.6 Receiver
• 2×5 V/2.6 A DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
DVI source equipment such as DVD/Blu-ray player/PC and TV/
monitor/projector with DVI input and DVI and CAT5e/6 cables.
2
5. FEATURES
• Complies with the HDBaseT-Lite class
• Supports HDMI (including HDCP with HDMI to DVI adaptor) over a
single CAT5e/6 up to 60m
• Full HD resolution support (1080p@60Hz/36-bit) and PC resolution
support (VGA to WUXGA) over CAT5e/6 cable
• Supports High Denition LPCM 7.1CH, Dolby TrueHD, Dolby Digital
Plus and DTS-HD Master Audio transmission
• Compact size with stylish design
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
CAT5e/6 OUT
DVI-D IN
DVI-D to CAT5e/6
DC 5V
TRANSMITTER
LINK
CAT5e/6 OUT
DVI-D IN
DVI-D to CAT5e/6
DC 5V
TRANSMITTER
LINK
2 31
1
DVI IN: Connect to the DVI source device such as a DVD player or
PC/Laptop with DVI cable.
2
DC 5V: Connect the 5V DC power supply into the unit and Plug the
adaptor to an AC outlet.
3
CAT5e/6 OUT: Connect to the receiver unit with a single CAT5e/6
cable to receive all data signals.
4
6.2 Receiver Front and Rear Panels
1 2 3
CAT5e/6 to DVI-D
CAT5e/6 IN
DVI-D OUT
DC 5V
RECEIVER
LINK
CAT5e/6 to DVI-D
CAT5e/6 IN
DVI-D OUT
DC 5V
RECEIVER
LINK
1
DC 5V: Connect the 5V DC power supply into the unit and plug
the adaptor to an AC outlet.
2
CAT5e/6 IN: Connect to the transmitter unit with a single CAT5e/6
cable for transmission of all data signals.
3
DVI OUT: Connect to a DVI equipped TV/monitor for display of the
DVI input source signal.
6.3 Transmitter and Receiver Top Panels
CAT5e/6 OUT
DVI-D IN
DVI-D to CAT5e/6
DC 5V
TRANSMITTER
LINK
CAT5e/6 to DVI-D
CAT5e/6 IN
DVI-D OUT
DC 5V
RECEIVER
LINK
1
1
1
LINK LED: This LED will illuminate in blue when the devices are
connected with a CAT5e/6 cable. If the data transmission has an
error the LED will blink.
5
7. CONNECTION DIAGRAM
RXL
TXL
DVI Monitor
CAT5e/6
(60m)
Power
Supply
Power
Supply
PC or Laptop
DVI Output
DVI Input
6
8. SPECIFICATIONS
Video Bandwidth 300 MHz/10.2 Gbps
Transmitter
Input 1×DVI
Output 1×RJ45
Receiver
Input 1×RJ45
Output 1×DVI
ESD Protection Human Body Model:
±8kV (air-gap discharge)
±4kV (contact discharge)
Power Supply 2×5 V/2.6 A DC (US/EU standards, CE/
FCC/UL certied)
Dimensions 55 mm (W)×82 mm (D)×22.5 mm (H)/each
Weight 56 g (TX), 64 g (RX)
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0 ˚C~40 ˚C/ 32 ˚F~104 ˚F
Storage Temperature −20 ˚C~60 ˚C/−4 ˚F~140 ˚F
Relative Humidity 20~90 % RH (non-condensing)
Power Consumption 3 W (TX), 5.5 W (RX)
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere CYP Extender Handbücher
CYP
CYP PU-515PL-TX Bedienungsanleitung
CYP
CYP CH-1109TX Bedienungsanleitung
CYP
CYP CIR-03 Bedienungsanleitung
CYP
CYP Suprex SPX-7400 Series Bedienungsanleitung
CYP
CYP PU-USB-AL Bedienungsanleitung
CYP
CYP CH-1527TX Bedienungsanleitung
CYP
CYP CH-501TX Bedienungsanleitung
CYP
CYP CH-1529TX Bedienungsanleitung
CYP
CYP PUV-1250PL-TX Bedienungsanleitung
CYP
CYP CH-506TXPLRXPL Bedienungsanleitung
CYP
CYP PU-1107-KIT Bedienungsanleitung
CYP
CYP PU-103 Bedienungsanleitung
CYP
CYP PU-507TX-HDVGA Bedienungsanleitung
CYP
CYP PUV-1510RX Bedienungsanleitung
CYP
CYP PU-1103 Bedienungsanleitung
CYP
CYP CIR-03 Bedienungsanleitung
CYP
CYP PUV-2000TX Bedienungsanleitung
CYP
CYP CH-1601TXRX Bedienungsanleitung
CYP
CYP CH-1107EX Bedienungsanleitung
CYP
CYP CH-514RXL Bedienungsanleitung
