CYP CMSI-8D8DS Bedienungsanleitung

CMSI-8D8DS

8 x 8 DVI Matrix

Operation Manual

OR-DVI88S

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of ﬁ re,

electrical shock and injury to persons.

• To prevent ﬁ re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufﬁ cient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

RDV1 21/09/26 Preliminary Release

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 1

6. Operation Controls and Functions....... 2

6.1 Front Panel ........................................2

6.2 Rear Panel.........................................3

6.3 Side Panel .........................................4

6.4 Remote Control................................4

6.5 Remote Control................................5

6.6 RS-232 Commands...........................5

7. Speciﬁ cations ........................................ 6

8. Connection and Installation................. 7

9. Acronyms ............................................... 8

1. INTRODUCTION

The 8 x 8 DVI Matrix is a fabulous device for organizing and distributing

your DVI signals. With 8 DVI input ports and 8 DVI output ports this

device allows a great amount of sources and display to be used

motivationally.

2. APPLICATIONS

• Video/TV wall display

• Commercial advertising and displaying

• Lecture room display and control

• Hyper market demonstration and control

3. PACKAGE CONTENTS

• 8 x8 DVI Matrix

• 24V/6.25A DC adaptor x 1

• Remote control x 1

• Operation manual

4. SYSTEM REQUIREMENTS

• Input source equipments with DVI connection cables and output

DVI display with DVI connection cables.

5. FEATURES

• HDMI, HDCP1.1 and DVI compliant

• Supports HDMI 3D feature (with HDMI to DVI adaptor cable)

• Supports resolutions to VGA ~ WUXGA and 480i~1080p follow by

output display’s EDID

• Supports 3D signal display follow by display TV’s EDID

• Supports DVI input up to 15 meters with 8bits resolution or 10 meters

with 12bits resolution

• Supports IR extension

• Supports RS-232, remote control and on panel control

• 2U size design

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

1 62 3 4 5

POWER LOCK

MENU OUTA 1B2C3D4

E5F6G7H8

8X8 DVI MATRIX CMSI-8D8DS

1LCM:

This monitor displays your setting information with each input and

output selection.

2Power button LED:

Press this button to turn on the device and the green LED will

illuminate when the power is on. When the LED illuminate in red it is

in standby mode

3LOCK:

Press this button to lock all the buttons on the panel. To unlock, just

press it again.

4IR:

This IR window accepts the remote control signal of this device

only.

5Menu:

Press this button once to select EDID setting from STD (internal) 1 or

TV (external) 2 then press it again to conﬁ rm the selection. Press

this button every to conﬁ rm the selection.

61 ~8 /A ~ H & Out/In button:

Press Out/In button ﬁ rst to select the output/input then press the

number button to make the selection accordingly. For example,

output A ~ D wish to select input 1 and E ~ H wish to select input

2. Press Out→A→B→C→D→In→1→Menu, and then press Out

→E→F→G→H→In→2→Menu. If the menu button is not press the

selection will not be changed.

1 62 3 4 5

POWER LOCK

MENU OUTA 1B2C3D4

E5F6G7H8

8 x 8 DVI Matrix

6.2 Rear Panel

LAN

IR IN

RS232 SERVICE

ABCDEFFG

DVI IN

DVI OUT

12345678

DVI OUT

DC 24V

V+

GND

V+

12 3 4 75 6

1LAN:

This slot is to connect with CAT5/6 cable from an IP router for on-

line ﬁ rmware updating with a website designed by the device’s

designer. Or may be a control terminal on-link from a designate IP

address.

2RS-232:

This slot is to connect with D-Sub 9pin cable from the PC/NB device

for RS-232 control.

3IR-In:

This slot is to connect with the IR extender included in the package

for IR signal receiving from the remote control of this device.

4Service:

This slot is to connect with USB cable for manufacturers’ ﬁ rmware

update only.

5DVI OUT A~H:

These slots are to connect with display or monitor with DVI cables

for output image display.

6DVI IN 1~8:

These slots are to connect with input source equipment such

as Blu-ray player or Set-Up-Box with DVI cable or HDMI to DVI

converter cable for input signal sending.

7DC24V:

This slot is to plug the power cord with adaptor included in the

package and then connect them with AC wall outlet for power

supply.

6.3 Side Panel

Ventilator:

These are fan ventilator area, DO NOT block these area or cover it

with any object.

6.4 Remote Control

1Power:

These are fan ventilator area, DO NOT

block these area or cover it with any

object.

2IN:

Input ports selection 1~8.

3OUT:

Output ports selection A~H.

CR-110

IN OUT

2 3

6.5 Remote Control

CMSI-8D8DS

►

◄

Remote Control Console

PIN Assignment PIN Assignment

1 NC 1 NC

2 Tx2 Rx

3 Rx3 Tx

4 NC 4 NC

5 GND 5 GND

6 NC 6 NC

7 NC 7 NC

8 NC 8 NC

9 NC 9 NC

Baud Rate: 19200bps

Data bit: 8 bits

Parity: None

Flow Control: None

Stop Bit: 1

6.6 RS-232 Commands

Command (Case Sensitive) Description

A1~A8 Switch output A to 1~8

B1~B8 Switch output B to 1~8

C1~C8 Switch output C to 1~8

D1~D8 Switch output D to 1~8

E1~E8 Switch output E to 1~8

F1~F8 Switch output F to 1~8

G1~G8 Switch output G to 1~8

H1~H8 Switch output H to 1~8

ABCD...1~ABCD...8 Switch output ABCD... to 1~8

P0 POWER OFF

P1 POWER ON

I1~I8 switch all the output to 1~8

7. SPECIFICATIONS

TMDS Clock Frequency 2.25 Gbps

Input Ports 8 x DVI, 1 x IR, 1 x RS-232, 1 x USB B type(for

ﬁ rmware update only), 1 x RJ-45 (LAN)

Output Ports 8 x DVI

ESD Protection Human body model: ±8 kV (air-gap

discharge)

±4 kV (contact

discharge)

Power Supply 24V/6.25A DC (US/EU standards, CE/FCC/

UL certiﬁ ed)

Dimensions (mm) 438(W) x 255(D) x 93(H)

Weight(g) 4392

Chassis Material Metal

Silkscreen Color Black

Operating Temperature 0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F

Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F

Relative Humidity 20 ~ 90% RH (non-condensing)

Power Consumption(W)

Andere Handbücher für CMSI-8D8DS

Inhaltsverzeichnis

Andere CYP Matrix-Umschalter Handbücher

CYP

CYP PUV-1082PL-4K22N Bedienungsanleitung

CYP

CYP CPLUS-44PLV Bedienungsanleitung

CYP

CYP OR-HD88HC Bedienungsanleitung

CYP

CYP CMSI-8H8CVL Bedienungsanleitung

CYP

CYP CMLUX-44S Bedienungsanleitung

CYP

CYP CMPRO-4H4H Bedienungsanleitung

CYP

CYP OR-HD42S Bedienungsanleitung

CYP

CYP Elpro Video Labs CDPS-UC4H4HFS Bedienungsanleitung

CYP

CYP SM-4X4-HDMI-LC Bedienungsanleitung

CYP

CYP Elpro Video Labs CDPS-UC4H4HFS Bedienungsanleitung

CYP

CYP CPLUS-V32USBC Bedienungsanleitung

CYP

CYP PU-8H8HBTPL-4K22 Bedienungsanleitung

CYP

CYP CPLUS-1082VA Bedienungsanleitung

CYP

CYP EL-42M-PIP Bedienungsanleitung

CYP

CYP PU-8H8HBTE Bedienungsanleitung

CYP

CYP CPLUS-662CVAL Bedienungsanleitung

CYP

CYP PU-16HBT Bedienungsanleitung

CYP

CYP PU-8H8HBTPL-4K Bedienungsanleitung

CYP

CYP CMPRO-U4H4CVE Bedienungsanleitung

CYP

CYP OR-HD44E Bedienungsanleitung

CYP

CYP OR-44U-4K22 Bedienungsanleitung

CYP

CYP CMSI-4H4CV Bedienungsanleitung

CYP

CYP CMPRO-U8H8CVPL Bedienungsanleitung

CYP

CYP PUV-1082-4K22N Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte

Lindy

Lindy 38042 Bedienungsanleitung