CYP OR-42-4K22 Bedienungsanleitung

OR-42-4K22

4 x 2 HDMI Matrix Switcher (4K, HDCP2.2, HDMI2.0)

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer le, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sucient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 28/10/2016 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................6

5. Features..................................................7

6. Operation Controls and Functions .......8

6.1 Front Panel................................................... 8

6.2 Rear Panel..................................................... 9

6.3 Remote Control........................................10

6.4 WebGUI .......................................................11

6.4.1 WebGUI Control Page...................12

6.4.2 Power On/O ..................................12

6.4.3 Routing..............................................13

6.4.4 Source Detect .................................13

6.4.5 Status..................................................14

6.4.6 EDID....................................................14

6.4.7 HDCP Control ..................................15

6.4.8 Firmware Update ...........................16

6.4.9 HDMI Out Info.................................16

6.4.10 Labelling.........................................17

6.4.11 Network Setting...........................17

6.5 Telnet Control ...........................................17

6.6 RS-232 Command....................................20

7. Connection Diagram .......................... 22

8. Specications...................................... 23

8.1 Technical Specications ........................23

8.2 Support Timing Table.............................24

8.3 HDMI Cable Length.................................25

1. INTRODUCTION

This 4x2 HDMI Matrix Switcher is designed to enable the user to switch

between any of the four connected HDMI sources to send video and

audio to either of the two connected HDMI displays. This matrix switcher

fully supports 4K resolutions and is HDMI2.0 and HDCP 2.2 compliant,

ensuring maximum compatibility with the latest 4K UHD sources and

displays.

The unit supports all the latest features of the HDMI2.0 specication

such as 4K UHD resolutions (4K2K@60Hz - YUV4:4:4),HDR (High Dynamic

Range), 'Deep Color', and High Denition audio. Control is via manual

selection buttons, IR, RS-232, Telnet or Web GUI.

2. APPLICATIONS

Entertainment Room & Home Theater

Show Room & Demo Room

Class room & Lecture Hall Presentations

Public Commercial Display

3. PACKAGE CONTENTS

1 x HDMI matrix unit

1 x IR Extender with cable

1 x 5V / 2.6A DC power adaptor

1 x Remote control unit (model: CR-155)

1 x Operation Manual

4. SYSTEM REQUIREMENTS

HDMI source equipment such as media players, video game consoles

or set-top boxes.

HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

The use of“Premium High Speed HDMI” cables is highly recommended.

5. FEATURES

HDMI2.0 and HDCP2.2 compliant

Routes four HDMI sources to two HDMI displays

Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby

Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and

DTS-HD Master Audio

4K UHD resolutions (4K2K@60Hz - YUV4:4:4)

Supports HDR (High Dynamic Range) and Deep Colour

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

POWERA

DMI IN

HDMI IN / OUT

1 2 3 4 5 6

1IR window: Accepts IR signals from the included IR remote for control

of this unit only.

2POWER: Press this button to power on the unit or place it into stand-

by mode.

Note: Ethernet and RS-232 remain active while the unit is in stand-by

mode.

3Power indicator: This LED will illuminate GREEN to indicate the unit

is on and receiving power. When the unit is in stand-by mode the LED

will illuminate RED.

4HDMI Out routing buttons“A” & “B”: Press either of these buttons

to sequentially switch through the available inputs for the associated

output.

5HDMI In indicator “1&2&3&4”: The LED in each column will

illuminate GREEN to indicate which source is currently selected for

each output

6HDMI In: Connect to HDMI source equipment such as a media player,

game console or set-top box. DVI sources are also supported with the

use of an HDMI to DVI adapter.

6.2 Rear Panel

234AB

HDMI IN HDMI OUT SERVICE CONTROL RS-232 IR IN DC 5V

1 2 3 4 5 6 7

1HDMI In : Connect to HDMI source equipment such as a media player,

game console or set-top box. DVI sources are also supported with the

use of an HDMI to DVI adapter

2HDMI Out: Connect to HDMI TVs, monitors or ampliers for digital

video and audio output. DVI sources are also supported with the use

of an HDMI to DVI adapter

3SERVICE: This slot (USB 2.0) is reserved for rmware update use only.

Please plug in a USB thumb drive containing the new rmware to

update the unit.

4CONTROL: Connect directly, or through a network switch, to your PC/

laptop to control the unit via telnet/WebGUI.

5RS-232: Connect directly to your PC/laptop to send RS-232 commands

to control the unit.

6IR IN: Connect to the provided IR Extender to extend the IR control

range of the unit. Ensure that the remote being used is within direct

line-of-sight of the IR Extender.

7DC 5V: Plug the 5V DC power adapter into the unit and connect it to

an AC wall outlet for power.

6.3 Remote Control

1POWER: Press Power key to turn on the

device or set to standby mode.

2OUTPUT A1~A4 & B1~B4:Press these

buttons to change the routing of output A/B.

CR-155

POWER

Inhaltsverzeichnis

Andere CYP Matrix-Umschalter Handbücher

CYP

CYP CMSI-8D8DS Bedienungsanleitung

CYP

CYP OR-HD88HC Bedienungsanleitung

CYP

CYP CPLUS-662CVEA Bedienungsanleitung

CYP

CYP PUV-1082-4K22 Bedienungsanleitung

CYP

CYP PU-424HBTE Bedienungsanleitung

CYP

CYP CPLUS-662CVAL Bedienungsanleitung

CYP

CYP CMSI-3232 Bedienungsanleitung

CYP

CYP PU-O4H4C Bedienungsanleitung

CYP

CYP CMSI-8H8HS Bedienungsanleitung

CYP

CYP CMSI-8H8CV Bedienungsanleitung

CYP

CYP OR-HD88S Bedienungsanleitung

CYP

CYP OR-DVI88SA Bedienungsanleitung

CYP

CYP OR-HD42S Bedienungsanleitung

CYP

CYP CPLUS-V4H2HPIP Bedienungsanleitung

CYP

CYP CPLUS-V32USBC Bedienungsanleitung

CYP

CYP CPLUS-V4H2HP-DT Bedienungsanleitung

CYP

CYP CPLUS-V8H8HP Bedienungsanleitung

CYP

CYP OR-IR88 Bedienungsanleitung

CYP

CYP PU-16HBT Bedienungsanleitung

CYP

CYP CMSI-8H8CVL Bedienungsanleitung

CYP

CYP PUV-1082PL-4K22N Bedienungsanleitung

CYP

CYP CMPRO-4H4H Bedienungsanleitung

CYP

CYP OR-HD22S Bedienungsanleitung

CYP

CYP CPLUS-V4H4H Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte

Lindy

Lindy 38042 Bedienungsanleitung