CYP CP-1261D Bedienungsanleitung
CP-1261D
PC/HD to DVI Format Converter
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 27/10/08 Preliminary Release
VS1 24/06/13 Updated format/diagrams
CONTENTS
1. Introduction................................................1
2. Applications...............................................1
3. Package Contents ....................................1
4. System Requirements................................1
5. Features......................................................1
6. Operation Controls and Functions........... 2
6.1 Front Panel.............................................2
6.2 Rear Panel .............................................3
6.3 DVI-I Pin Conguration .........................4
6.4 Resolution Supports...............................5
7. Connection Diagram ................................ 6
8. Specications ............................................7
9. Acronyms ...................................................8
1
1. INTRODUCTION
This PC/HD to DVI Format converter can convert and upgrade your
input signal from analog to digital and VGA to a DVI signal, whether
your source is a RGB signal from a PC or a Component signal (through
the supplied HD-15 VGA to 3 RCA cable).
2. APPLICATIONS
• Analog PC/HD signal to digital LCD monitor
• Analog source integration for digital systems
3. PACKAGE CONTENTS
• PC/HD to DVI Format Converter
• 5 V/1 A DC Power Supply Adaptor
• D-sub 15-pin to 3 RCA Cable
• Operation Manual
4. SYSTEM REQUIREMENTS
PC/DVD player or other source input and HDTV, projector, monitor or
digital video system.
5. FEATURES
• Connect computers with analog PC output or DVD Players with HD
component output to digital DVI monitors or projectors
• Manual selection of analog RGB or Component (YPbPr) sources
• Manual selection of output between Bypass or digital RGB
• Supports input resolutions up to 1920×1200@60 (RB) for PC and
1920×1080p@60 Hz for HD component
• Built-in EDID management
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
PC/YPbPr INPUT
DC 5V
1 32
1PC/YPbPr INPUT
Connect to the PC or YPbPr source, using a VGA cable or the
supplied D-Sub 15-pin to 3 RCA adaptor cable.
2DC 5V
Connect the 5 V DC power supply to the unit and plug the adaptor
into AC wall outlet.
3POWER LED
The red LED will illuminate when connected to a power supply.
3
6.2 Rear Panel
DVI-I OUTPUT OUTPUT
RGB
Bypass
INPUT
RGB
YPbPr
1 2 3
1DVI-I (DVI-D signal) OUTPUT
Connect to the DVI input of your display or digital video system
with a DVI cable.
2INPUT FORMAT SWITCH
YPbPr: Set the switch to YPbPr when the input format of your source
device is Component YPbPr. Use the supplied VGA to 3 RCA
adaptor cable to connect the unit to your source device.
RGB: Set the switch to RGB when the input format of your source
device is RGBHV. Use an HD-15 D-Sub VGA cable to connect the
unit to your source device.
Output Input Switch
YPbPr RGB
Output
Switch
Bypass YPbPr RGB
RGB RGB RGB
3OUTPUT FORMAT SWITCH
Bypass: When the input format is Component YPbPr set the switch
to bypass for digital YPbPr output, set the switch to RGB for digital
RGB output.
RGB: When the input format is RGB, set the switch to either position
for the digital RGB out. There is no Component YPbPr output for
RGB input.
4
6.3 DVI-I Pin Conguration
DVI-Integrated(DVI-I)- Supports both analog and digital connections
to the display. This 29-pin connector can carry single or dual-link all-
digital video/data signals on 24 pins and uses 5 pins to carry analog
video/data signals and ground.
17 24 C3
1
C4
8 C1 C2
9C5
COMBINED ANALOG AND DIGITAL CONNECTOR PIN ASSIGNMENTS
Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment
1 9 T.M.D.S Data1- 17 T.M.D.S Data0-
2 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+
3 T.M.D.S. Data2/4
Shield
11 T.M.D.S. Data1/3
Shield
19 T.M.D.S. Data0/5
Shield
4 12 20
5 13 21
6 DDC Clock 14 +5V Power 22 T.M.D.S. Clock
Shield
7 DDC Data 15 Ground (Return
for +5V, Hsync,
and Vsync)
23 T.M.D.S. Clock+
8 16 Hot Plug Detect 24 T.M.D.S. Clock-
C1 C2 C3
C4 C5 Ground
5
6.4 Resolution Supports
PC 640×480 VGA@60/72/75/85
800×600 SVGA@56, SVGA@60/72/75/85
1024×768 XGA@60/70/75/85
1152×864 MAC@70/75/85
1280×768 WXGA@60 (RB)/60
1280×800 WXGA@60 (RB)/60/75
1288×1024 SXGA@60/75/85
1440×900 WXGA+@60 (RB)/60/75
1600×1200 UXGA@60
1680×1050 WSXGA+@60 (RB)/60
1920×1200 WUXGA@60 (RB) (Pixel-rate154 MHz)
HD/RGB 480i@60, 576i@50
480p@60, 576p@50
720p@60/50
1080p@60/50
1080p@60/50/30
Note:
1. Some PC monitors do not support HD mode.
2. Digital output resolution is the same as the source input.
Andere Handbücher für CP-1261D
2
Inhaltsverzeichnis
Andere CYP Medienkonverter Handbücher
CYP
CYP CDL-165ETHG Bedienungsanleitung
CYP
CYP DCT-4N Bedienungsanleitung
CYP
CYP DCT-15 Bedienungsanleitung
CYP
CYP CS-801H Bedienungsanleitung
CYP
CYP CP-259HN Bedienungsanleitung
CYP
CYP CDPH-1P Installationshandbuch
CYP
CYP SY-398H Bedienungsanleitung
CYP
CYP CDPS-US100R Bedienungsanleitung
CYP
CYP SY-CHQV Bedienungsanleitung
CYP
CYP DCT-3HP Bedienungsanleitung
CYP
CYP CPRO-2E4KS Bedienungsanleitung
CYP
CYP CH-521RXHS Bedienungsanleitung
CYP
CYP CP-293N Bedienungsanleitung
CYP
CYP CSLUX-300 Bedienungsanleitung
CYP
CYP AU-11SA Bedienungsanleitung
CYP
CYP CPT-385A Bedienungsanleitung
CYP
CYP CPLUS-V2PEL Bedienungsanleitung
CYP
CYP DCT-3A Bedienungsanleitung
CYP
CYP CDPV-1A Bedienungsanleitung
CYP
CYP DCT-3 Bedienungsanleitung
