CYP CV-401D Bedienungsanleitung
CV-401D
DVI-D to Video Scan Converter
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 25/04/11 Preliminary Release
VS1 11/10/12 Updated format/diagrams
VR1 10/07/14 Add Auto TV 4:3X
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Top Panel ..........................................3
6.2 Left Panel ..........................................4
6.3 Right Panel........................................4
6.4 OSD Menu.........................................5
6.5 Supported Input Timing ...................7
7. Connection Diagram ............................ 8
8. Specications ........................................ 9
9. Acronyms ............................................. 10
1
1. INTRODUCTION
The DVI to Video Scan Converter is designed to convert the digital
video signal from DVI-D sources to analog composite (CVBS) signal
(NTSC or PAL). It is HDMI and DVI compliant and has many great
features such like 3D noise reduction, frame rate conversion, adaptive
contrast enhancement and many more. It also has a simple on-screen
display (OSD) menu that allows the user to access the display status
including input/output information.
2. APPLICATIONS
• Convert DVI-D signal to Composite (CVBS) signal
• Display graphics card signal on CRT monitor
• Display PC signal to LCD display
3. PACKAGE CONTENTS
• DVI-D to Video Scan Converter
• Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Input source equipment such as a PC/Notebook with DVI cable and
output display (TV) with CVBS input port and cable.
2
5. FEATURES
• DVI 1.0 compliant
• Converts video signal from DVI-D source to NTSC/PAL composite
(CVBS) signal
• Accepts a wide range of input resolutions of 480p to 1080p@60 Hz
(DVI-D) and VGA to WUXGA@60 Hz (PC)
• 3D noise reduction in both the temporal and spatial domain
• Frame rate conversion
• Adaptive contrast enhancement
• OSD Display
• Overscan and underscan adjustment
• Phase and Aspect adjustment
• No software installation required
• Compact and elegant design
Note: The converter does NOT support HDCP. If any HDCP-encrypted
content is played, there will no any video output.
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Top Panel
1 2
1
NTSC/PAL MENU (Hold): Press this button to bring up the On-Screen
Display (OSD) which will display the input timing and the output TV
format information.
When the OSD is displayed, press the button again to switch the
output TV system from NTSC to PAL or from PAL to NTSC.
Press and hold this button for 3 seconds the OSD will bring up the
selection menu. Press it sequentially to select the required setting.
2
POWER LED: This LED will illuminate in RED when the unit is
connected to the power supply.
4
6.2 Left Panel
1
1
DVI-D IN: Connect to the DVI equipped source equipment
such as a PC or notebook for DVI input signal with a DVI
cable.
6.3 Right Panel
12
1
CV OUT: Connect to the output display TV or monitor with RCA
cable for display of the converted composite (CVBS) signal.
2
DV5V: Plug the 5 V DC power supply included in the package into
the unit and connect the adaptor to an AC wall outlet.
5
6.4 OSD Menu
IN 1280×960 @60 (Input Timing) Press the Menu button once
to bring up the OSD and
display the input (IN) and
Output (OUT) information.
OUT NTSC (Output TV System)
NTSC Press and hold the MENU
button for 3 seconds to
bring up the OSD then press
it repeatedly to move the
OSD cursor to the desired
selection. Once the selection
is made, if the MENU
button is not pressed for a
few seconds, the OSD will
disappear and the display
will output following the
selected parameters.
PAL
Underscan 1
Underscan 2
Overscan
Aspect Adj
Full Screen
Letterbox
Pan & Scan
Auto TV 4:3
Auto TV 4:3X
Auto TV 16:9
Below is the example of the scan selection result.
4:3
Source TV Underscan1 Underscan2 Overscan
Andere Handbücher für CV-401D
1
Inhaltsverzeichnis
Andere CYP Medienkonverter Handbücher
CYP
CYP DCT-9DD Bedienungsanleitung
CYP
CYP CPRO-SE2DD Bedienungsanleitung
CYP
CYP CP-255I Bedienungsanleitung
CYP
CYP CP-267 Bedienungsanleitung
CYP
CYP CP-298H Bedienungsanleitung
CYP
CYP CSDI-12SR Bedienungsanleitung
CYP
CYP CPLUS-V11PE8 Bedienungsanleitung
CYP
CYP CLUX-SDI2DVIA Bedienungsanleitung
CYP
CYP EL-8500VA Bedienungsanleitung
CYP
CYP CSDI-12SR Bedienungsanleitung
CYP
CYP PRO-SDI2H Bedienungsanleitung
CYP
CYP CP-255I Bedienungsanleitung
CYP
CYP CP-1262DI Bedienungsanleitung
CYP
CYP PRO-H2-3GSDI Bedienungsanleitung
CYP
CYP CLUX-DVI2SDIA Bedienungsanleitung
CYP
CYP CM-388 Bedienungsanleitung
CYP
CYP nT15FX06 Bedienungsanleitung
CYP
CYP CHD-380 Bedienungsanleitung
CYP
CYP AU-D4T Bedienungsanleitung
CYP
CYP DCT-3HP Bedienungsanleitung
