CYP nT15IX05 Bedienungsanleitung
SOLUTIONS FOR GROWTH n - TECH SOLUTIONS
nT
nT15IX05 | CM-397M
Operation ManualOperation Manual
CGA + YCBCR To VGA Scaler
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2012 by Cypress Technology.
All Rights Reserved.
Version VR1.0 May 2012
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 27/06/12 Preliminary Release
VS1 21/03/13 Updated Format and Diagrams
VR2 22/07/15 CGA Input Timing
CONTENTS
1. Introduction ............................................ 1
2. Applications ........................................... 1
3. Package Contents ................................ 1
4. System Requirements ............................ 1
5. Features .................................................. 2
6. Operation Controls and Functions ....... 3
6.1 Top Panel ..........................................3
6.2 Front Panel ........................................4
6.3 Rear Panel .........................................4
6.4 OSD Menu .........................................5
7. Connection Diagram ............................ 6
8. Specications ........................................7
9. Acronyms ............................................... 8
1
1. INTRODUCTION
This is an analog CGA (RGB) or Component (YCbCr) to PC Converter
box that can scale the signal to 3 different PC modes; VGA, XGA or
WXGA. It enables you to connect your RGB or YCbCr signal source
such as game consoles or video players to a PC display. It provides
further features such as phase & H/V position adjustment, eld-invert
setting and OSD display.
2. APPLICATIONS
• CGA to PC resolution conversion
• Component (YCbCr) video to PC resolution conversion
• Display video of older game consoles on standard PC monitors
3. PACKAGE CONTENTS
• Component/CGA to PC Converter
• D-Sub 15-pin to 3-RCA Component Cable
• 5V DC Power Supply Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Source equipment such as a PC or Video player and output TV/
monitor with appropriate connection cables.
2
5. FEATURES
• Accepts CGA (RGB) or Component (YCbCr) format and converts
to PC format
• Scales CGA or Component (YCbCr 480i/576i) signals up to VGA/
XGA/WXGA PC resolutions
• 50/60Hz frame rate conversion ensures error-free display (576i only)
• The CGA (RGB) input is auto-detected and can be RGBHV, RGB
H+V or RGsB (Sync-on-Green)
• The Component (YCbCr) input is auto-detected and can be
YPbPrHV, YPbPrS or YPbPr (Sync-on-Y)
• Play video games on your PC monitors
• Supports CGA at 480i and 576i
• Supports phase and horizontal/vertical position adjustment
• Supports eld-invert setting
• Supports several types of signal synchronizations, including
Composite Sync, Sync-on-Green and Sync-on-Y
• High-resolution output picture
• Plug and Play design, easy to setup and there is no driver software
required
• Palm- size design for easy transportation
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Top Panel
Component/CGA to PC converter
12
1 MENU Button
Press this button once to display the current input & output
resolutions and while the OSD is displayed press it again to choose
between input signals, CGA (RGB) or Component (YCbCr).
To enter into the OSD menu, press and hold the button for 3
seconds. Press it repeatedly to cycle through the options and
leave the OSD menu for few seconds for unit to switch to that
option.
2 INPUT LED
This LED will light according to the type of source signal, red for
CGA (RGB), green for Component (YCbCr).
4
6.2 Front Panel
CG A
In
DC
5V
1 2
1 CGA IN
Connect to the source equipment such as a PC or video player
with D-Sub 15-pin cable or Component (YCbCr) to D-Sub 15-pin
adaptor cable.
2 DC 5V
Connect the supplied power adaptor to the unit and plug it into
the AC wall outlet for power supply.
6.3 Rear Panel
VGA
XGA
WXGA
PC
OUT
1 2
1 VGA/XGA/WXGA Switch
Use this Switch to select the required output resolution (VGA, XGA
or WXGA).
2 PC OUT
Connect to a TV/monitor with D-Sub 15pin cable for display of the
converted signal.
5
6.4 OSD Menu
1IN 576i
OUT WXGA
2Phase Adjust
3IN Color Space
4H Position
5V Position
6Field Invert
7Information
8System Reset
Exit
1 The rst part of the OSD will display the current input and output
resolutions.
2 Phase Adjust has a total of 32 steps for adjusting the phase,
ranging from 0~31. Press the button repeatedly to adjust the phase
setting whenever changing the source equipment. The device will
keep memory of the last phase adjustment.
3 IN Color Space for selecting between CGA (RGB) or Component
(YCbCr) input signals.
4 H Position has total of 20 horizontal positions ranging from −10 ~ +10.
5 V Position has total of 10 vertical positions ranging from −5 ~ +5.
6 Field Invert can be used to x the even/odd eld problem. Select
Yes to correct the issue when the display image appears to be
eld inverted.
7 Information displays the settings for input signal, color space, eld
inversion and rmware version.
8 System reset will revert the device back to the factory default
settings.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere CYP Medienkonverter Handbücher
CYP
CYP CSC-6015 Bedienungsanleitung
CYP
CYP CDPS-41SQ Bedienungsanleitung
CYP
CYP CPLUS-VSE2DD Bedienungsanleitung
CYP
CYP CPT-387HD Bedienungsanleitung
CYP
CYP CPLUS-VPE2DD Bedienungsanleitung
CYP
CYP CVMDP-1080P Bedienungsanleitung
CYP
CYP CHDBT-1H7CPL Bedienungsanleitung
CYP
CYP CPRO-11SI Bedienungsanleitung
CYP
CYP CP-280H Bedienungsanleitung
CYP
CYP CP-295N Bedienungsanleitung
CYP
CYP CSC-6030HB Bedienungsanleitung
CYP
CYP SY-401V Bedienungsanleitung
CYP
CYP AU-11DM Bedienungsanleitung
CYP
CYP CSC-5500 Bedienungsanleitung
CYP
CYP CDPS-US100R Installationshandbuch
CYP
CYP CSC-6011 Bedienungsanleitung
CYP
CYP CM-388 Bedienungsanleitung
CYP
CYP AU-D6-192 Bedienungsanleitung
CYP
CYP QU-8MS Bedienungsanleitung
CYP
CYP CSLUX-300I Bedienungsanleitung
