CYP EL-5400D Bedienungsanleitung

EL-5400D

DVI/VGA/Display Port Presentation Switch

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer le, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sucient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 16/12/2013 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................6

5. Features..................................................7

6. Operation Controls and Functions.......8

6.1 Front Panel................................................... 8

6.2 Rear Panel...................................................10

7. OSD Menu and Function List ............. 11

8. Remote Control................................... 12

8.1 RS-232 Protocols......................................13

8.2 RS-232 Commands..................................14

9. Connection and Installation .............. 16

10. Specications.................................... 17

10.1 PC, HDMI, DP Input Timing................18

10.2 Output Resolution ................................20

11. Acronyms .......................................... 21

1. INTRODUCTION

The EL-5400D Presentation Switch with integral scaler is designed to

be used with Dual-link DVI, Mini Display-Port, and PC/Component

sources allowing users to switch and scale these sources to it's HDMI

output. Digital Optical and Analogue Stereo Audio inputs and outputs

can be managed for bi-directional conversion, extraction, and insertion

from the individual ports for full audio embedding and de-embedding

functionality. Control is via the IR remote, or RS-232 protocol.

2. APPLICATIONS

Scale Dual-Link DVI, Mini-DisplayPort and PC/Component inputs to

HDMI output

3. PACKAGE CONTENTS

HD High Resolution Scaler

VGA to 3RCA converter cable

5V/2.6A DC power adaptor

Operation Manual

4. SYSTEM REQUIREMENTS

Input Dual-Link DVI/Mini-DisplayPort/PC sources and output with

HDMI display.

5. FEATURES

v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant

Integrate and switch DVI, VGA, and Mini Display-Port sources to a

single HDMI output

Digital to Analogue & Analogue to Digital Audio conversion (DAC/ADC)

Audio support: Dolby Digital, Dolby DTS, Dolby Digital Plus, Dolby

True HD, DTS-HD Master Audio, LPCM Multi-channel, LPCM Stereo,

Analogue Stereo

Resolution Support: Component up to 1080p@60Hz / Dual-Link DVI &

Mini Display-Port up to 2560×1600@60Hz (Reduced Blanking) / PC up

to 1920×1200@60/75Hz

Supports component input when connected VGA to 3-RCA adaptor

(not supplied)

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

XGA

720P

ENTER

MENU/

OPTICAL

OUT

AUDIO HDMI OUT

DC 5V

POWER

OPTICAL AUDIO

6 7 8 9 10

2 3 4 5

1MENU/ENTER

Press this button to ENTER the OSD menu. Press again to conrm the

selection. Press it together with - button to switch output to 720p or

with + button to switch output to XGA instantly.

2-/IN

a.“-“: When in OSD page, press this button repeatedly to move

down through the OSD selection.

b. “IN”: Press this button for quick input port selections.

3+/OUT

a.“+”: When in OSD page, press this button repeatedly to move up

through the OSD selection.

b. “OUT”: Press this button for quick output resolution selections.

4OPTICAL OUT

This slot is to connect to amplier with OPTICAL cable and from

amplier to speakers or directly to active speaker with OPTICAL cable.

5AUDIO L/R OUT

This slot is to connect to speaker or amplier with 3.5mm audio phone

jack cable.

6OPTICAL IN

This slot is to connect from the input OPTICAL audio source

equipment such as Blu-ray or DVD player.

7AUDIO L/R IN

This slot is to connect from the L/R input audio source equipment

such as PC/laptop.

8HDMI OUT

This slot is to connect to HDMI display with HDMI cable.

9IR sensor

10 DC 5V & POWER

Plug the 5V DC power supply into the unit and connect the adaptor

to AC wall outlet. Once the power supply is connected the power LED

will illuminate

6.2 Rear Panel

RS232

SERVICEMDP

Dual-Link DVI PC/COMP

2 3 4 5

1RS232

This slot is to connect with D-Sub 9pin cable from the PC/NB device

for RS-232 control.

2SERVICE

This slot is to connect with USB cable for manufacturers’ rmware

update only.

3Mini-DisplayPort IN

This slot is to connect with MiniDisplayPort source output for

DisplayPort signal sending.

4Dual-Link DVI IN

This slot is to connect with Dual-Link DVI sources output for Dual-Link

DVI signal sending.

5PC/COMP IN

This slot is to connect with PC/NB or DVD/Set-Top Box source

equipment with D-Sub 15-pin cable for PC source signal input or with

D-Sub 15-pin to 3 RCA adaptor for component signal input.

Inhaltsverzeichnis

Andere CYP Schalten Handbücher

CYP

CYP CPLUS-V3H1H Bedienungsanleitung

CYP

CYP DCT-17 Bedienungsanleitung

CYP

CYP EL-C41C Bedienungsanleitung

CYP

CYP EL-41PIP Bedienungsanleitung

CYP

CYP EL-7500V Bedienungsanleitung

CYP

CYP PU-2H8HBTE-AD Bedienungsanleitung

CYP

CYP CMLUX-4H4CAT Bedienungsanleitung

CYP

CYP EL-5400 Bedienungsanleitung

CYP

CYP DCT-17 Bedienungsanleitung

CYP

CYP CLUX-41W Bedienungsanleitung

CYP

CYP CLUX-31GAME Bedienungsanleitung

CYP

CYP EL-C61C Bedienungsanleitung

CYP

CYP CED-1M Bedienungsanleitung

CYP

CYP CDPS-U4H4HSA Bedienungsanleitung

CYP

CYP CSC-6030CVE Bedienungsanleitung

CYP

CYP CLUX-31N Bedienungsanleitung

CYP

CYP CSDI-42 Bedienungsanleitung

CYP

CYP PU-444HBTE Bedienungsanleitung

CYP

CYP EL-5300 Bedienungsanleitung

CYP

CYP EL-5600 Bedienungsanleitung

CYP

CYP EL-31SY Bedienungsanleitung

CYP

CYP PU-1H2HBTE Bedienungsanleitung

CYP

CYP EL-41X Bedienungsanleitung

CYP

CYP AU-D21 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung