CYP EL-2600V Bedienungsanleitung
EL-2600V
HDBaseT Transmitter with Trigger Control
4K UHD+HDMI/DP/VGA/USB
Driver User Guide
®
registered trademarks of HDMI licensing Administrator, Inc.
3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2020 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 21/09/2020 First release
5
CONTENTS
1. Introduction...........................................6
2. DRIVER PROPERTIES..............................6
3. IP NETWORK CONNECTION...................6
4. DEVICE SPECIFIC COMMAND ................7
4.1 Set Power Reboot...................................... 7
4.2 Set Auto Switching Mode....................... 7
4.3 Set Key Lock................................................. 7
4.4 Set Route Preset......................................... 7
4.5 Set HDBT Audio Mode............................. 7
4.6 Set Audio Mixer Source Volume........... 8
4.7 Set Microphone Mode............................. 8
4.8 Set Microphone Volume ......................... 8
4.9 Set Audio Mixer Line Volume ................ 8
4.10 Set Analog Output Volume ................. 8
4.11 Set Analog Output Mute ..................... 8
4.12 Set Phantom Mode ................................ 8
6
1. INTRODUCTION
This driver has been designed to provide two-way control of the CYP 9x2
Multi-format Presentation Scaler, via RS232 or TCP/IP.
2. DRIVER PROPERTIES
The property of this driver is shown below.
Figure 1: Driver Properties
Driver Version Driver version number
Debug Mode Support use only
Debug Level Support use only
Command Delay Milliseconds a delay of millisecond between
commands
Connected To Network Shows operational status of driver
3. IP NETWORK CONNECTION
If an IP driver used, the IP address of the A/V Scaler is entered in the usual
way in connections -> Network.
7
4. DEVICE SPECIFIC COMMAND
In addition to the usual A/V Scaler functionality supported by Control4,
there are a number of device specific commands for the A/V Scaler
switching.
4.1 Set Power Reboot
Power Status Reboot
4.2 Set Auto Switching Mode
Video Output Channel HDMI or HDBT
Switching Mode OFF or Auto Switch
4.3 Set Key Lock
Key Lock Status Locked or Unlocked
4.4 Set Route Preset
Route Preset 1 to 4
4.5 Set HDBT Audio Mode
HDBT Audio Mode
1 [Source audio only]
2 [Line audio only]
3 [Microphone only]
4 [Source + Microphone]
5 [Source + Line]
8
4.6 Set Audio Mixer Source Volume
Volume(dB) -120 to 18
4.7 Set Microphone Mode
Microphone Mode Front Panel or WebGUI
4.8 Set Microphone Volume
Volume(dB) 0 to 60
4.9 Set Audio Mixer Line Volume
Volume(dB) -120 to 18
4.10 Set Analog Output Volume
Volume(dB) -103 to 24
4.11 Set Analog Output Mute
Audio Mute Status Mute or Unmute
4.12 Set Phantom Mode
Phantom Mode OFF / 5V / 48V
Inhaltsverzeichnis
Andere CYP Sender Handbücher
CYP
CYP PUV-1710LTX-AVLC Bedienungsanleitung
CYP
CYP PUV-1830TX-AVLC Bedienungsanleitung
CYP
CYP CH-527TXVBD Bedienungsanleitung
CYP
CYP PUV-1210PL-TX Bedienungsanleitung
CYP
CYP CH-507TXWPUS Bedienungsanleitung
CYP
CYP PU-507TX-CVGA Installationshandbuch
CYP
CYP CSI-8H8CVTX Bedienungsanleitung
CYP
CYP PU-1H7HBTL Bedienungsanleitung
CYP
CYP IP-A750TX Bedienungsanleitung
CYP
CYP CH-506RXWP Bedienungsanleitung
CYP
CYP CH-1107 TX Bedienungsanleitung
CYP
CYP AVX-101F-TX Bedienungsanleitung
CYP
CYP PUV-1630TXWP-EU Bedienungsanleitung
CYP
CYP CH-107TX Bedienungsanleitung
CYP
CYP CPLUS-12FTX Bedienungsanleitung
CYP
CYP PUV-3000TX Bedienungsanleitung
CYP
CYP CH-2605TXV Bedienungsanleitung
CYP
CYP PU-507-KIT Bedienungsanleitung
CYP
CYP COH-RX2 Installationshandbuch
CYP
CYP PU-107 Bedienungsanleitung
Beliebte Sender Handbücher anderer Marken
Dejero
Dejero EnGo 3x Bedienungsanleitung
Rosemount
Rosemount 4600 Bedienungsanleitung
Speaka Professional
Speaka Professional 2342740 Bedienungsanleitung
trubomat
trubomat GAB 1000 Bedienungsanleitung
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Bedienungsanleitung
Rondish
Rondish UT-11 Bedienungsanleitung
