CYP CH-2606TX Bedienungsanleitung
CH-2606TX
HDMI/USB to HDBaseT Transmitter
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document are
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in
use to avoid wasting electricity.
VERSION HISTORY
REV. DATE SUMMARY OF CHANGE
RDV1 2019/04/25 Preliminary release
RDV2 2019/12/04 Updated RS-232 command list
RDV3 2020/02/26 Removed Adaptor from package content
CONTENTS
1. Introduction......................................................1
2. Applications.....................................................1
3. Package Contents ..........................................1
4. System Requirements......................................2
5. Features............................................................2
6. Operation Controls and Functions.................3
6.1 Front Panel ................................................. 3
6.2 Rear Panel.................................................. 4
6.3 IR Cable Pinouts ........................................ 5
6.4 RS-232 Pinout and Defaults ...................... 5
6.5 RS-232 Commands.................................... 6
7. Connection Diagram ......................................8
8. Specications ..................................................9
8.1 Technical Specications .......................... 9
8.2 Video Specications............................... 10
8.3 Audio Specications............................... 12
8.3.1 Digital Audio................................... 12
8.3.2 Analog Audio ................................. 12
8.5 HDBaseT Features.................................... 13
9. Acronyms .......................................................14
1
1. INTRODUCTION
This HDBaseT 2.0 Transmitter is a great solution for extending
uncompressed HD audio and video as well as Ethernet and control via
a single run of Cat.5e/6/7 cable over distances of up to 100 meters.
Multiple data and control signal types are supported, including USB 2.0,
IR, RS-232 and LAN connections. An independent analog stereo audio
input is also provided to enable easy audio signal extension. The HDMI
input supports transmitting resolutions up to a maximum of 4K@30Hz
(4:4:4, 8-bit) or 4K@60Hz (4:2:0, 8-bit) over HDBaseT to a compatible
Receiver.
When paired with this unit’s standard Receiver, 2 switchable USB 2.0
host (Type B) connections are available (1 on the Transmitter, 1 on the
Receiver) which can connect to devices on up to 6 USB 2.0 (Type A)
ports (3 on the Transmitter, 3 on the Receiver) forming a highly exible
KVM extension conguration (Note: Only 1 USB host may be active at
a time).
This Transmitter (PD) may be powered locally using a standard power
supply, or it can be powered by PoH (Power over HDBaseT) provided
by a compatible Receiver (PSE), allowing for greater exibility within
different installation scenarios. This unit is controllable via a front panel
button and RS-232.
2. APPLICATIONS
• Lecture room display and control
• Showroom display and control
• Meeting room presentation and control
• Classroom display and control
3. PACKAGE CONTENTS
• 1× HDMI/USB to HDBaseT Transmitter
• 1× 3.5mm to IR Blaster Cable
• 1x 3.5mm to IR Extender cable
• 1× Shockproof Feet (Set of 4)
• 1× Operation Manual
2
4. SYSTEM REQUIREMENTS
• HDMI source equipment such as a media player, video game
console or set-top box.
• A compatible HDBaseT 2.0 Receiver with PoH (PSE) support is highly
recommended.
• The use of Premium High Speed HDMI cables, and industry standard
Cat.6, Cat.6a or Cat.7, is highly recommended.
5. FEATURES
• HDMI 2.0 and DVI 1.0 compatible
• HDCP 2.2 and HDCP 1.x compliant
• HDBaseT 2.0 compatible
• 1 HDMI input and 1 HDBaseT output
• 3 USB 2.0 Type A ports and 1 USB 2.0 Type B port
• Supports HDMI input resolutions up to 4K@60Hz (4:2:0, 8-bit)
• HDBaseT output supports resolutions up to 4K@60Hz (4:2:0, 8-bit)
• HDBaseT output transmits video, audio, and data over a single
Cat.5e/6/7 cable and can reach distances up to 100m/230ft at 4K
when using Cat.6a/7
• HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet,
PoH (PD), and control (bi-directional IR/RS-232/USB 2.0)
• Supports CEC bypass
• Supports pass-through of audio formats including LPCM (up to 8
channels), Bitstream and HD Bitstream from HDMI sources
• Independent analog stereo audio extension
• Flexible USB host selection using the front panel button
Note: Multiple USB hosts may be connected at once (up to 2 total,
between the Tx and a compatible Rx unit) with a single selected
host active at a time
• Supports PoH from Receiver (PSE) to Transmitter (PD) (compatible
Transmitters only)
• Controllable via a front panel button and RS-232
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
USB SELECT
POWER
LINK
1 2 3 4
1POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
2LINK LED: This LED will illuminate solidly when a live connection with
a compatible Receiver is active.
3USB 2.0 (Type A) Ports: Connect directly to standard USB 2.0
peripherals such as a mouse, keyboard or ash drive to extend
their USB functionality to the designated Host Port.
4USB SELECT Button & LED: Press this button to toggle between the
USB Host Ports on the Transmitter or compatible Receiver. The LED
will illuminate to indicate which USB Host Port is currently active.
If the LED is off, the USB Host Port on the connected Receiver is
active.
Note: Changing the USB host will force the HDBaseT connection
to briey disconnect while it recongures. The connected host
(PC, laptop, etc.) may also take a moment to detect all available
devices.
USB 2.0 (Type B) Port: Connect directly to a standard USB host such
as a PC or laptop to extend its USB functionality to all currently
connected USB devices.
Note: Multiple USB hosts may be connected at once (up to 2 total,
between the Tx and a compatible Rx unit) with a single selected
host active at a time.
4
6.2 Rear Panel
LOCAL
RS-232
L/R IN LANHDMI INCAT 5e/6/7 OUTIR OUTIR INDC 24V TXRX
BYPASS
RS-232
87654321
1DC 24V Port: Plug the 24V DC power adapter into this port and
connect it to an AC wall outlet for power. (Optional when
connected to a compatible PoH (PSE) Receiver)
2BYPASS RS-232 Terminal Block: Connect to a PC, laptop, or serial
controllable device with a 3-pin adapter cable for the extension of
RS-232 signals between both ends of the HDBaseT connection.
3LOCAL RS-232 Terminal Block: Connect directly to a PC, laptop,
or other serial control device with a 3-pin adapter cable to send
RS-232 commands to control the unit.
4IR IN Port: Connect to the provided IR Extender to receive IR
control signals and extend them to devices connected to the
other end of the HDBaseT connection. Ensure that the remote
being used is within direct line-of-sight of the IR Extender.
IR OUT Port: Connect to the provided IR Blaster to transmit IR signals
from the other end of the HDBaseT connection to devices within
direct line-of-sight of the IR Blaster.
5CAT 5e/6/7 OUT Port: Connect to a compatible HDBaseT Receiver
with a single Cat.5e/6/7 cable for transmission of all data signals.
Power via PoH will also be supplied to this unit when connected to
a compatible PSE Receiver.
6HDMI IN Port: Connect to HDMI source equipment such as a media
player, game console or set-top box.
7L/R IN Port: Connect to the analog stereo output of a device such
as a CD player or PC. This is transmitted as an independent audio
channel to compatible HDBaseT Receivers.
8LAN Port: Connect to an Ethernet supporting device or to your
local network, as appropriate, to extend the network to both ends
of the HDBaseT connection.
5
6.3 IR Cable Pinouts
IR Blaster
Cabl
e
1
2
3
Infrared
Power
Not U
sed
IR Extender
Cabl
e
1
2
3
Infr
ared
Power
Ground
6.4 RS-232 Pinout and Defaults
Serial Port Default Settings
Baud Rate 19200
Data Bits 8
Parity Bits None
Stop Bits 1
Flow Control None
1
2
3
RxD
GND
TxD
3-pin
Terminal Block
Inhaltsverzeichnis
Andere CYP Sender Handbücher
CYP
CYP PUV-1602TXWP Bedienungsanleitung
CYP
CYP PUV-1620S-TX Bedienungsanleitung
CYP
CYP CH-352TX Bedienungsanleitung
CYP
CYP PUV-1630TXWP-EU Bedienungsanleitung
CYP
CYP PU-507TX-CVGA Installationshandbuch
CYP
CYP PUV-1605S-TXWP Bedienungsanleitung
CYP
CYP PUV-3050TX-UA Bedienungsanleitung
CYP
CYP CH-2605TXV Bedienungsanleitung
CYP
CYP IP-7000TX Installationshandbuch
CYP
CYP CH-U331TX Bedienungsanleitung
CYP
CYP CH-103TX Bedienungsanleitung
CYP
CYP CH-507TXWPUS Bedienungsanleitung
CYP
CYP CH-501RX Bedienungsanleitung
CYP
CYP PUV-1550S-RX Bedienungsanleitung
CYP
CYP PUV-1710LTX-AVLC Bedienungsanleitung
CYP
CYP CDPS-P313RTX Bedienungsanleitung
CYP
CYP PUV-1630TXWP Bedienungsanleitung
CYP
CYP IP-A750TX Bedienungsanleitung
CYP
CYP CH-1103TX Bedienungsanleitung
CYP
CYP CA-HDMIAT Bedienungsanleitung
Beliebte Sender Handbücher anderer Marken
Dejero
Dejero EnGo 3x Bedienungsanleitung
Rosemount
Rosemount 4600 Bedienungsanleitung
Speaka Professional
Speaka Professional 2342740 Bedienungsanleitung
trubomat
trubomat GAB 1000 Bedienungsanleitung
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 Bedienungsanleitung
Rondish
Rondish UT-11 Bedienungsanleitung
