CYP PU-507TX-1H Bedienungsanleitung

PU-507TX-1H

5-Play™ HDBaseT™ Transmitter with simultaneous HDMI

output (inc. PoE & single LAN, up to 100m)

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer le, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sucient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 22/10/2013 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................6

5. Features..................................................7

6. Operation Controls and Functions .......8

6.1 Front Panel................................................... 8

6.2 Rear Panel..................................................... 9

6.3 IR Cable Pin Assignment .......................10

6.4 D-Sub 9 Pin Denitions .........................10

7. Connection Diagram .......................... 11

8. Specications...................................... 12

8.1 CAT5e/6/7 Cable Specication ...........13

9. Acronyms............................................. 13

1. INTRODUCTION

The PU-507TX-1H Transmitter allows uncompressed HDMI signals and

IP data to be transmitted over a Single CAT5e/6/7 cable. This solution

has a simultaneous HDMI output enabling a local HDMI display to be

connected. This device also features full 5-Play convergence allowing the

distribution of Video, Audio, LAN serving, Power over Ethernet (PoE), RS-

232 and 2-way IR control functionality over the same CAT5e/6/7 cable.

These combined HDMI and control signals can be transmitted up to

lengths of 100 metres.

2. APPLICATIONS

Household entertainment sharing and control

Lecture room display and control

Showroom display and control

Meeting room presentation and control

Classroom display and control

3. PACKAGE CONTENTS

1xPU-507TX-1H Transmitter

1xIR Blaster

1x3.5mm Phone Jack to RS-232 Cable

1x24V DC Power Adaptor

1xPower Cord

Operation Manual

4. SYSTEM REQUIREMENTS

Source equipment with HDMI output connector

Display TV/Monitor with HDMI input connector

HDMI over CAT5e/6/7 Receivers with industry standard CAT5e/6/7

cables

5. FEATURES

Supports all v1.4 HDMI resolutions plus 4k.

Supports uncompressed video/audio up to 10.2Gbps

Common supported resolutions: HDTV: 480p, 576p, 720p, 1080i,

1080p, 1080p24, 4K; PC: VGA, SVGA, XGA, WXGA, SXGA, UXGA, WUXGA.

HDMI, HDCP, & DVI compliant

Supports HDCP repeating and CEC functions

Uncompressed data transfer over single CAT cable (100m - CAT6/7;

80m - CAT5e)

Audio support up to 7.1CH & Dolby TrueHD, DTS-HD

5-Play™ convergence: HDMI, LAN, POE & Control (IR & RS232)

Supports 3D signals

Note:

1. This system was tested with CAT6/23AWG cables, results may vary

with cables of a dierent specication.

2. The PoE function is designed for powering compatible Receiver

units only non-PoE Receivers will need their own power supply.

Receivers of another brand may not be compatible.

3. Displaying HDMI 4Kx2K resolution require the standard 4Kx2K HDMI

cable and display in order for proper image displaying.

4. This device obtain the last memory function therefore, the device

will use last CAT5e/6 output port's EDID when CAT5e/6 output is not

connected to a display after power cycling.

The unit will detect CAT5e/6 output's EDID when it obtain a 4Kx2K

EDID and send out the signal accordingly to other output ports. If

the CAT5e/6 output is without a 4Kx2K's EDID the unit will detect all

output's EDID and send out the signal that all outputs can accept.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

HDMI OUT HDMI IN

LAN

RS232 IN

HDMI to CAT5e/6 with LAN/IR/RS232 Transmitter

1 2 3 4

1HDMI OUT: Connect to HDMI display for instant image display or

cascade with another family type Transmitter.

2HDMI IN: Connect with source equipment such as DVD/Blu-ray or PS3

player.

3LAN: Connect to intra-net or internet service system for a total sharing

rate of 100Mbps within the link of Transmitter. Warning: DO NOT

connect this slot with any of the CAT5e/6/7 port, doing so may trigger

a power shut down and ruin the device.

4RS-232 IN: Connect to a PC/Laptop or RS-232 enabled device (with

supplied 3.5mm Phone Jack to D-Sub 9-Pin adaptor) to transmit of RS-

232 commands.

6.2 Rear Panel

POWER

DC 24V

CAT5e/6 OUT

IR 1

BLASTER USB LINK

IR 2

EXTENDER

1 2 3 4 5 6 7

1POWER LED: Once the power supply is connected the LED will

illuminate.

2DC 24V: Plug the 24V DC power supply into the unit and connect the

adaptor to an AC outlet.

3IR 1 BLASTER: Connect with the supplied IR Blaster to blast out the

IR signal received from the Receiver side. Place the IR Blaster in direct

lineof-sight of the equipment to be controlled.

4IR 2 EXTENDER: Connect with the supplied IR Extender to receive IR

signal from Transmitter side and blast out at Receiver side. Ensure that

remote controller being used is within the direct line-of-sight of the IR

Extender.

5USB: This slot is reserved for rmware update only.

6LINK: This LED will illuminate when CAT5e/6/7 output have been

connected to the Receiver and the Receiver have connected with

display that shows image on screen.

7CAT5e/6/7 OUT: Connect this port to CAT5e/6/7 to HDMI Receiver

with CAT5e/6/7 cable to extend the signal up to 100m.

6.3 IR Cable Pin Assignment

Power 3.3V

IR Blaster Signal

IR Signal

Power 3.3V

Ground

IR Extender

IR Blaster

6.4 D-Sub 9 Pin Denitions

Pin Dene TX / R

1 N/C

2 TxD/RxD

3 RxD/TxD

4 NC

5 GND

6 NC

7 NC

8 NC

9 NC

7. CONNECTION DIAGRAM

POWER

DC 24V

CAT5e/6 OUT

IR 1

BLASTER USBLINK

IR 2

EXTENDER

HDMI OUT HDMI IN

LAN

RS232 IN

HDMI to CAT5e/6 with LAN/IR/RS232 Transmitter

1.5m

60°

CAT5e/6 In

Link

IR1 Extender

IR2 Blaster

Power

3m 3m

60°

3D TV/Display

HDMI HDMI

RS-232 Cable

Blu-ray or PS3 Player

Inhaltsverzeichnis

Andere CYP Sender Handbücher

CYP

CYP CH-507TXWPUS Bedienungsanleitung

CYP

CYP PU-515PLTX-1H Bedienungsanleitung

CYP

CYP CHDBT-1H2CE Bedienungsanleitung

CYP

CYP CA-HDMIAT Bedienungsanleitung

CYP

CYP CH-1602RX Bedienungsanleitung

CYP

CYP CPLUS-12FTX Bedienungsanleitung

CYP

CYP PU-USB2-KIT Bedienungsanleitung

CYP

CYP PUV-1630TTX Bedienungsanleitung

CYP

CYP CH-1527TXV Bedienungsanleitung

CYP

CYP PU-103 Bedienungsanleitung

CYP

CYP PUV-3000TX Bedienungsanleitung

CYP

CYP CH-1602TXR Bedienungsanleitung

CYP

CYP PU-514LTX-1H Bedienungsanleitung

CYP

CYP PU-1109 Bedienungsanleitung

CYP

CYP PUV-3090TX-UEA Bedienungsanleitung

CYP

CYP VEX-T1201T Bedienungsanleitung

CYP

CYP CH-501RX Bedienungsanleitung

CYP

CYP CHDBT-1H7CE Bedienungsanleitung

CYP

CYP EL-2600V Bedienungsanleitung

CYP

CYP CH-1527TXPLV Bedienungsanleitung

CYP

CYP PUV-1510TX Bedienungsanleitung

CYP

CYP PUV-1830TX-AVLC Bedienungsanleitung

CYP

CYP CH-2603TX Bedienungsanleitung

CYP

CYP IP-A750TX Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung