CYP PUV-2100TX-AVLC Bedienungsanleitung

PUV-2100TX-AVLC

HDBaseT™ 4K/HDR Transmitter (100m)

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 21/06/2019 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................7

5. Features..................................................8

6. Operation Controls and Functions .......9

6.1 Front Panel................................................... 9

6.2 Rear Panel...................................................10

6.3 IR Cable Pinouts .......................................11

6.4 RS-232 Bypass Pinout.............................11

6.5 Serial Control (Via USB Port)................11

6.6 Serial Commands (Via USB Port)........12

7. Connection Diagram .......................... 13

8. Specifications...................................... 14

8.1 Technical Specifications ........................14

8.2 Video Specifications................................15

8.3 Audio Specifications...............................16

8.4 Cable Specifications ...............................17

8.5 HDBaseT Features....................................18

9. Acronyms............................................. 18

1. INTRODUCTION

This HDBaseT 2.0 Transmitter provides for the extension of 4K video with

HDR and high bitrate audio over a single Cat.6a/7 cable at distances of up

to 100m (328 feet). This Transmitter complies with the advanced HDCP 2.2

and HDMI 2.0 standards, as well as supporting the legacy HDCP 1.x and

HDMI 1.x standards. Despite HDBaseT’s 10.2Gbps bandwidth limitation,

4K UHD HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit)

as well as 10/12-bit sources with HDR, are able to be processed and

extended by the use of AVLC (Adaptive Visually Lossless Compression)

when connected to a compatible AVLC Receiver. This transmitter can also

pass RS-232, IR, Ethernet, and multiple audio streams across the same

cable that carries the video signal.

The bi-directional optical audio feature allows optical audio to be

exchanged bi-directionally between the Transmitter and Receiver.

Rounding out the feature set is automatic HDBaseT clock stretching and

TMDS re-clocking support. The 48V PoH (Power over HDBaseT) feature

allows a compatible connected Receiver to be powered directly by the

Transmitter, eliminating the need for a separate power supply for the

Receiver.

2. APPLICATIONS

Household entertainment sharing and control

Lecture room display and control

Showroom display and control

Meeting room presentation and control

Classroom display and control

3. PACKAGE CONTENTS

1×HDMI over HDBaseT 2.0 Transmitter (PD) with HDR/ARC

1×24V/2.7A DC Power Adapter

1×Power Cord

1×3.5mm to IR Blaster Cable

1×Shockproof Feet (Set of 4)

1×Operation Manual

4. SYSTEM REQUIREMENTS

HDMI source equipment such as a media player, video game console

or set-top box.

An HDBaseT 2.0 Receiver equipped with AVLC and 48V PoH (PD)

support is strongly recommended.

The use of “Premium High Speed HDMI” cables, and industry standard

Cat.6, Cat.6a or Cat.7, is highly recommended.

5. FEATURES

HDMI with HDR, 3D & 4K@60Hz support, DVI 1.0 compatible

HDCP 2.2 and HDCP 1.x compliant

Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input

and output

Supports Deep Colour input and output up to 12-bit

Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output

Supports CEC bypass

HDBaseT output transmits video, audio and data over a single

Cat.5e/6/7 cable and can reach distances up to 100m/328ft at 4K

when using Cat.6a/7

HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet,

48V PoH (PSE), bi-directional optical audio and Control

(bi-directional IR/RS-232 pass-through)

Integrated AVLC (Adaptive Visually Lossless Compression) activates

when the bandwidth requirements of the source are beyond 10.2Gbps

(340MHz) allowing for sources up to 18Gbps (600MHz) to be sent to a

compatible Receiver with no loss of visual quality

The AVLC feature allows manual selection between High Quality Mode

(Full bandwidth) and Standard Mode (Lower bandwidth, useful for

longer cable runs with 4K sources)

Bi-directional optical audio extension support

Supports HDMI DDC bus clock stretching for improved compatibility

with certain Blu-ray players

Performs TMDS re-clocking and signal re-generation for improved

signal integrity

Supports standard 48V PoH from Transmitter to Receiver (compatible

Receivers only)

Note: The 48V PoH function is designed for powering compatible Receiver

units only. Non-PoH Receivers will need their own power supply. Receivers

from other brands may not be compatible.

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

SERVICE ARC

OPT

STD

POWER

LINK

HQ/STD

SWITCH

1 2 3 4 5

PUV-2100TX-AVLC

1SERVICE Port: This port is reserved for firmware update and serial

control use only.

2ARC & OPT LEDs: These LEDs illuminate to indicate if the optical

output source is coming from the optical input or ARC on the

connected Receiver.

Note: Selecting ARC as a source requires a compatible Receiver.

3HQ/STD SWITCH Button: This switch allows the user to select which

compression mode to use when AVLC is required. A single press

toggles between modes.

HQ (High Quality) mode uses the least amount of compression and

provides the highest possible visual quality (perceptually identical to

the original). In this mode, AVLC compression activates for any signal

requiring more than 9Gbps.

STD (Standard Quality) mode applies additional signal reduction

methods to lower the bandwidth requirements even further,

improving transmission reliability at the cost of some visual fidelity. In

this mode, AVLC compression activates for any signal requiring more

than 7.5Gbps.

4HQ/STD LEDs: These LEDs illuminate to indicate which AVLC mode is

selected: HQ (High Quality) or STD (Standard Quality).

5POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

LINK LED: This LED will illuminate solidly when a live connection with

a compatible Receiver is active.

6.2 Rear Panel

LANHDMI ININOUTDC 24V RS-232

BYPASS

IR OPTICAL

CAT5e/6/7 OUTOUT IN

1 2 3 4 5 6 7

1DC 24V Port: Plug the 24V DC power adapter into this port and

connect it to an AC wall outlet for power.

2RS-232 BYPASS Port: Connect to a PC, laptop or serial controllable

device for the extension of RS-232 signals between both ends of the

HDBaseT connection.

3IR OUT Port: Connect to the provided IR Blaster to transmit IR signals

from the other end of the HDBaseT connection to devices within

direct line-of-sight of the IR Blaster.

IR IN Port: Connect to an IR Extender to extend the IR control range

of devices connected to the other end of the HDBaseT connection.

Ensure that the remote being used is within direct line-of-sight of the

IR Extender.

4OPTICAL OUT Port: Connect to powered speakers or an amplifier

for digital audio output using an appropriate optical cable. Audio is

sourced from the Optical Audio Input port on a connected compatible

Receiver.

OPTICAL IN Port: Connect to the optical audio output of a device

such as a media player or game console using an appropriate optical

cable. Audio is sent to the Optical Audio Output on a connected

compatible Receiver.

5CAT5e/6/7 OUT Port: Connect to a compatible HDBaseT Receiver

with a single Cat.5e/6/7 cable for transmission of all data signals. 48V

PoH will also be supplied to a connected compatible PD Receiver.

6HDMI IN Port: Connect to HDMI source equipment such as a media

player, game console or set-top box.

7LAN Port: Connect to an Ethernet supporting device or to your local

network, as appropriate, to extend the network to both ends of the

HDBaseT connection.

Inhaltsverzeichnis

Andere CYP Sender Handbücher

CYP

CYP PU-607BD-TX Bedienungsanleitung

CYP

CYP CH-306TXA & RXA Bedienungsanleitung

CYP

CYP CH-507TX Bedienungsanleitung

CYP

CYP CH-1602TXR Bedienungsanleitung

CYP

CYP CH-2603TX Bedienungsanleitung

CYP

CYP PUV-1830TX-AVLC Bedienungsanleitung

CYP

CYP VEX-X1102T-B0C Bedienungsanleitung

CYP

CYP CH-2605TXV Bedienungsanleitung

CYP

CYP DCT-30TX Bedienungsanleitung

CYP

CYP CH-527TXVBD Bedienungsanleitung

CYP

CYP PUV-1630TXWP Bedienungsanleitung

CYP

CYP PUV-1510RXWP Bedienungsanleitung

CYP

CYP CH-103TX Bedienungsanleitung

CYP

CYP IP-7000TX Installationshandbuch

CYP

CYP PUV-1630TTX Bedienungsanleitung

CYP

CYP PUV-1510TX Bedienungsanleitung

CYP

CYP PU-507TX-1H Bedienungsanleitung

CYP

CYP VEX-T1201T Bedienungsanleitung

CYP

CYP CH-507TXBD: CH-507RXBD Bedienungsanleitung

CYP

CYP COH-RX2 Installationshandbuch

CYP

CYP PUV-1710LTX-AVLC Bedienungsanleitung

CYP

CYP CH-U331TX Bedienungsanleitung

CYP

CYP PU-501 Bedienungsanleitung

CYP

CYP PU-USB2-KIT Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung