CYP PUV-1602TXWP Bedienungsanleitung

PUV-1602TXWP

HDMI/VGA over Single CAT5e/6/7 HDBaseT™ Wallplate

Transmitter (Full 5Play™ & Single LAN up to 100m, PoH)

OPERATION MANUAL

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 20/06/2018 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................6

4. System Requirements ...........................7

5. Features..................................................7

6. Operation Controls and Functions .......8

6.1 Front Panel................................................... 8

6.2 Rear Panel..................................................... 9

6.3 RS-232 Protocol........................................10

6.4 RS-232 Commands..................................11

7. Connection Diagram .......................... 14

8. Specifications...................................... 15

8.1 Technical Specifications ........................15

8.2 Video Specifications................................16

8.3 Cable Specifications ...............................18

9. Acronyms............................................. 19

1. INTRODUCTION

This Transmitter is an HDMI/VGA switch with audio embedding and

HDBaseT output. The wall plate is designed for use with UK two-gang

sized enclosures. This Transmitter can send high definition uncompressed

audio/video along with Ethernet over a single cable up to a distance of

100 metres at 1080p@60Hz.

The HDMI input supports resolutions up to 4K@60Hz (4:4:4, 8-bit). The

VGA input supports resolutions up to WUXGA (RB) and with the use of the

associated 3.5mm audio input, stereo audio may be embedded as well.

To provide maximum compatibility with a wide range of display types,

all sources will be automatically scaled to match the preferred resolution

and timing of the connected display (as reported by the display's

EDID). Despite HDBaseT’s 10.2Gbps bandwidth limitation, even 4K UHD

HDMI video sources, up to and including 4K@60Hz (4:4:4, 8-bit), can be

supported by converting the signal to 4K@30Hz when necessary.

This unit also supports automatic input selection between the HDMI

and VGA inputs, with hot plug detection, enabling hands-free operation.

Additionally, the unit may be powered locally or via 48V PoH (Power over

HDBaseT) from a compatible HDBaseT Receiver, which allows for greater

flexibility in installations.

2. APPLICATIONS

Household entertainment sharing and control

Lecture room display and control

Showroom display and control

Meeting room presentation and control

Classroom display and control

3. PACKAGE CONTENTS

1×HDMI/VGA over HDBaseT Transmitter (with LAN support)

1×Operation Manual

4. SYSTEM REQUIREMENTS

HDMI source equipment such as a media player, video game console

or set-top box.

HDMI receiving equipment such as an HDTV, monitor or audio

amplifier.

The use of industry standard Cat.6, Cat.6a or Cat.7 cable is highly

recommended.

The use of “Premium High Speed HDMI”cables is highly

recommended.

5. FEATURES

HDMI 2.0 and DVI 1.0 compatible

HDCP 2.2 and HDCP 1.x compliant

1 HDMI input

1 VGA input with 3.5mm mini-jack audio input

Supports HDMI input resolutions up to 4K@60Hz (4:4:4, 8-bit)

Supports VGA input resolutions up to WUXGA (RB)

Automatic conversion of 4K@50/60Hz HDMI sources to 4K@30Hz

(4:4:4, 8-bit) for transmission over HDBaseT

Automatic scaling of sources to match the native resolution of the

HDMI display based on EDID

HDBaseT feature support: HD Video and Audio, 48V PoH, and Control

(Ethernet bypass)

Simultaneous transmission of uncompressed video, audio and data

over a single 100m Cat.5e/6/7 cable at 1080p and 70m at 4K

Automatic input selection with hot plug detection enabling handsfree

operation

Unit may be powered locally or via 48V PoH (PD) from a compatible

HDBaseT Receiver (PSE)

Wall plate is designed for UK two-gang sized enclosures

Controllable via front panel buttons and RS-232 (remote only)

Front panel LEDs indicate input selection, power and link status

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

HDMI VGA

LINKVGAHDMIPOWER

SERVICE

AUTO

ADJUST

SEL

LAN

PUV-1602TXWP

AUDIO

1 2 3 4 5 6

8 9 10 11

1POWER LED: This LED will illuminate to indicate the unit is on and

receiving power.

2HDMI IN LED: This LED will illuminate when HDMI is the selected

source.

3VGA IN LED: This LED will illuminate when VGA is the selected source.

4LINK LED: This LED will illuminate solid when both Transmitter and

Receiver are connected and communicating with each other properly.

5IN SEL: Press this button to switch between the available inputs. The

LED will illuminate to indicate which source is currently selected.

6AUTO ADJUST: Press this button to optimise the positioning of the

picture (VGA sources only).

Note: Pressing and holding the Auto Adjust button for 5 seconds while the

HDMI input is selected will reset the unit to its factory defaults.

7SERVICE: This slot is reserved for firmware update use only.

8HDMI IN: Connect to HDMI source equipment such as a media player,

game console or set-top box.

9VGA IN: Connect to VGA source equipment such as a PC or laptop.

10 AUDIO IN: Connect to the stereo analogue output of a device such as

a CD player or PC for embedding into the HDBaseT output.

11 LAN: Connect directly, or through a network switch, to your PC/laptop

to control the unit.

6.2 Rear Panel

DC 12V

−

CAT5e/6/7 OUT

1DC 12V: Plug a 12V DC power adapter into this port and connect it to

an AC wall outlet for power (optional, not required when powered by

PoH).

2CAT5e/6/7 OUT: Connect to a compatible HDBaseT Receiver with a

single Cat.5e/6/7 cable for transmission of all data signals.

6.3 RS-232 Protocol

TX RX

Pin Pinout Pin Pinout

1 1

2TxD 2 RxD

3 RxD 3 TxD

4 4

5 GND 5 GND

6 6

7 7

8 8

9 9

Inhaltsverzeichnis

Andere CYP Sender Handbücher

CYP

CYP CH-507TXBD: CH-507RXBD Bedienungsanleitung

CYP

CYP PUV-1605S-TXWP Bedienungsanleitung

CYP

CYP PU-1103 Bedienungsanleitung

CYP

CYP PU-103 Bedienungsanleitung

CYP

CYP Dante AU-DTI4-TX Bedienungsanleitung

CYP

CYP PU-514LTX-1H Bedienungsanleitung

CYP

CYP CH-2527TX Bedienungsanleitung

CYP

CYP EL-2600V Bedienungsanleitung

CYP

CYP PUV-3000TX Bedienungsanleitung

CYP

CYP CDPS-P313RTX Bedienungsanleitung

CYP

CYP PU-507TX-CVGA Installationshandbuch

CYP

CYP CH-527TXPLVBD Bedienungsanleitung

CYP

CYP PUV-1210PL-TX Bedienungsanleitung

CYP

CYP PUV-1660TTX Bedienungsanleitung

CYP

CYP CH-1529TXV Bedienungsanleitung

CYP

CYP PU-501 Bedienungsanleitung

CYP

CYP PUV-1550S-RX Bedienungsanleitung

CYP

CYP CH-1107 TX Bedienungsanleitung

CYP

CYP CHDBT-1H3CE Bedienungsanleitung

CYP

CYP PU-305BD-TX Bedienungsanleitung

CYP

CYP IP-7000TX Installationshandbuch

CYP

CYP PUV-3090TX-UEA Bedienungsanleitung

CYP

CYP CSI-8H8CVTX Bedienungsanleitung

CYP

CYP CH-1602TXR Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung