CYP PUV-1630TTX Bedienungsanleitung

OPERATION MANUAL

PUV-1630TTX

2x HDMI, 1x VGA over Single CAT5e/6/7 HDBaseT™

Table-Top Transmitter

DISCLAIMERS

The information in this manual has been carefully checked and is

believed to be accurate. CYP (UK) Ltd assumes no responsibility for any

infringements of patents or other rights of third parties which may result

from its use.

CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be

contained in this document. CYP (UK) Ltd also makes no commitment to

update or to keep current the information contained in this document.

CYP (UK) Ltd reserves the right to make improvements to this document

and/or product at any time and without notice.

No part of this document may be reproduced, transmitted, transcribed,

stored in a retrieval system, or any of its part translated into any language

or computer file, in any form or by any means—electronic, mechanical,

magnetic, optical, chemical, manual, or otherwise—without express

written permission and consent from CYP (UK) Ltd.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate

this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of fire,

electrical shock and injury to persons.

• To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts inside

the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU if

it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufficient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE SUMMARY OF CHANGE

v1.00 11/02/2019 First release

CONTENTS

1. Introduction...........................................6

2. Applications ...........................................6

3. Package Contents ..................................7

4. System Requirements ...........................7

5. Features..................................................7

6. Operation Controls and Functions.......9

6.1 Front Panel................................................... 9

6.2 Rear Panel...................................................10

6.3 WebGUI Control .......................................11

6.4 Serial Control (Via Receiver).................20

6.5 Telnet Control............................................20

6.6 RS-232 and Telnet Commands............21

7. Connection Diagram .......................... 36

8. Specifications...................................... 37

8.1 Basic Specifications.................................37

8.2 Video Specifications................................38

8.3 Audio Specifications...............................40

8.4 Cable Specifications ...............................41

8.5 HDBaseT Features....................................42

9. Acronyms............................................. 42

1. INTRODUCTION

The PUV-1630TTX is a brand new AV concept for the Commercial &

Corporate channel. Presentation equipment in corporate meeting rooms

can be dicult to operate and provide the user with challenges when

connecting their source to the installed AV system. Flexible meeting

rooms are also becoming more commonplace, which is where the

PUV-1630TTX provides the perfect balance between ease of use and

portability.

In collaboration with CMD the leading oce power and lighting

specialists, CYP has developed a dedicated HDBaseT switcher and

Transmitter that ts seamlessly into the CMD 'Contour' range. Providing

the user with a exible AV solution that removes the boundaries of how a

meeting space can be used.

The PUV-1630TTX Transmitter is a 2 x HDMI, 1 x VGA switch which allows

uncompressed HDMI and VGA signals to be transmitted over a Single

CAT5e/6/7 cable. This solution has the added features of analogue audio

em-bedding and a LAN connection over the same CAT5e/6/7 cable. These

combined HDMI and control signals can be transmitted up to lengths of

100 metres to a compatible PUV-1600 Series Receiver. When a device is

connected to the PUV-1630TTX, CEC control can be applied to 'power

up' the connected display and select the correct HDMI input channel

(programmed via the WebGUI).

This unit also supports automatic input detection between the HDMI

and the VGA inputs using hot plug detection, oering the user 'hands

free' control of the device. Despite the 10.2Gbps bandwidth limitation

of HDBaseT this clever transmitter will automatically convert signals of

higher bandwidths ensuring any HDMI 4KUHD signal can be passed

through the HDBaseT system. The unit also features push button control

on the front of the panel. The unit is powered by PoH supplied by a

compatible PUV-1600 series receiver.

2. APPLICATIONS

Household entertainment sharing and control

Lecture halls, auditoriums and classroom

Conference rooms and boardrooms

Hotel event spaces

3. PACKAGE CONTENTS

1×3 by 1 HDMI/VGA to HDBaseT Switcher

1×Operation Manual

4. SYSTEM REQUIREMENTS

HDMI or VGA source equipment such as media players, video game

consoles, PCs, or set-top boxes.

A compatible HDBaseT Receiver is required. An HDBaseT Receiver

capable of suppling 48V PoH is recommended.

The use of “Premium High Speed” HDMI cables, and industry standard

Cat.6, Cat.6a or Cat.7, is highly recommended.

5. FEATURES

Produced in collaboration with CMD

Supplied complete with the CMD 'Contour' unit, and C Clamp for

table-top xing

HDBaseT: High-Denition video and audio, 100BaseT Ethernet, PoH

(Power over HDBaseT)

HDMI 2.0 and DVI 1.0 compatible

HDCP 2.2 Compliant

2 x HDMI Input

1 x VGA Input with 3.5mm mini-jack analogue audio input

Automatic conversion of 4K @ 50/60Hz HDMI sources to 4K@30Hz

(4:4:4 8-Bit) for transmission over HDBaseT

Supports VGA input resolutions up to WUXGA (RGB)

PoH (Power over HDBaseT) Support

Auto Switching

CEC Control

Front panel push button control

Front panel LEDs to indicate Input Selection, link status and power

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

PWR LINK HDCP VGA IN

LAN

PUV-1630TTX

INPUT

SELECT

VGA IN 1

AUDIO IN

HDMI IN 3

HDMI IN 2

7 8 9

2 3 4 5 6

1PWR LED: This LED will illuminate to indicate the unit is on and

receiving power.

2LINK LED: This LED will illuminate when the unit is on, receiving

power, and has successfully linked to a compatible Receiver.

3HDCP LED: This LED indicates the HDCP mode of the current input.

Green indicates Follow Display mode, orange indicates Follow Source

mode, off indicates HDCP support is disabled.

4VGA IN LED: This LED will illuminate when the VGA input is selected.

5INFO Button: A short press of this button will switch between the

available inputs. Pressing and holding this button for 2 seconds will

activate the information OSD.

6HDMI IN 1 & 2 Ports and LEDs: Connect to HDMI source equipment

such as a media player, game console or set-top box. The appropriate

LED will illuminate when that HDMI input is selected.

7VGA IN Port: Connect to VGA source equipment such as a PC or

laptop.

L/R IN Port: Connect to the stereo analogue output of a device such

as a CD player or PC for embedding into the HDBaseT output.

8FAC. RESET Pinhole: Press and hold for 5 seconds to reset the unit to

its factory defaults.

9LAN Port: Connect to an Ethernet supporting device or to your local

network, as appropriate, to extend the network to both ends of the

HDBaseT connection and to control the unit.

6.2 Rear Panel

DC 12V

−

CAT5e/6/7 OUT

31 2

1DC 12V Port: Plug the 12V DC power adapter into this terminal block

and connect it to an AC wall outlet for power. (Optional)

Note: This connection is not required if the unit is receiving power via 48V

PoH from the Receiver.

2SERVICE Port: This port is reserved for rmware update use only.

3CAT5e/6/7 OUT Port: Connect to a compatible HDBaseT Receiver with

a single Cat.5e/6/7 cable for transmission of all data signals. 48V PoH

will also be supplied when connected to a compatible PSE Receiver.

Note: The 48V PoH function is designed to receive power from compatible

Receiver units only. Other brands of Receiver may not be compatible.

Inhaltsverzeichnis

Andere CYP Sender Handbücher

CYP

CYP PU-1H7HBTL Bedienungsanleitung

CYP

CYP CH-501RX Bedienungsanleitung

CYP

CYP CH-331H-TX Bedienungsanleitung

CYP

CYP CH-352TX Bedienungsanleitung

CYP

CYP CH-507TXBD: CH-507RXBD Bedienungsanleitung

CYP

CYP CH-527TXPLVBD Bedienungsanleitung

CYP

CYP CH-2605TXV Bedienungsanleitung

CYP

CYP VEX-X1102T-B0C Bedienungsanleitung

CYP

CYP PUV-3000TX Bedienungsanleitung

CYP

CYP PUV-1710LTX-AVLC Bedienungsanleitung

CYP

CYP PUV-3050TX-UA Bedienungsanleitung

CYP

CYP PUV-1602TXWP Bedienungsanleitung

CYP

CYP CH-1529TXPLV Bedienungsanleitung

CYP

CYP PU-103 Bedienungsanleitung

CYP

CYP CH-2527TXPL Bedienungsanleitung

CYP

CYP CH-2602TXWPUS Bedienungsanleitung

CYP

CYP CH-2603TX Bedienungsanleitung

CYP

CYP PUV-1210PL-TX Bedienungsanleitung

CYP

CYP PU-501 Bedienungsanleitung

CYP

CYP CH-1103TX Bedienungsanleitung

CYP

CYP CDPS-P313RTX Bedienungsanleitung

CYP

CYP CH-2527TX Bedienungsanleitung

CYP

CYP PU-515PLTX-1H Bedienungsanleitung

CYP

CYP DCT-30TX Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung