D-Link AirPlus G DP-G321 Bedienungsanleitung

Software and speciﬁcations subject to change without notice. DP-G321.06152004

If any of the above items are missing, please contact your reseller.

CD-ROM (Software, Manual and Warranty)

Before You Begin:

DP-G321 AirPlus G Wireless Multi-Port Print Server

Check Your Package Contents

AirPlus™ G 802.11g/2.4GHz

Wireless Multi-Port

Print Server

5V DC, 2.5A Power Adapter

Using a power

supply with a

different voltage

rating will damage this

product and void its

warranty.

This product can be setup using

any current Web browser, i.e.,

Internet Explorer 6 or Netscape

Navigator 7.0

You will need an Ethernet-enabled device, such as a laptop or desktop computer and

a USB or LPT printer that will connect to the DP-G321.

IMPORTANT: TURN OFF the power to the printer BEFORE installing the DP-G321

DP-G321

All manuals and user guides at all-guides.com

all-guides.com

Connecting the DP-G321 to Your Network

USB Ports: Used to

connect USB printers.

Power Receptor:

Connects the AC

Power Adapter

LAN Port: Connects

to a router or switch.

Warning!

Only attach USB printers to the USB ports of the DP-G321. Do not connect any other USB device

to the DP-G321’s USB port! Other devices may damage the unit and void the warranty.

Antenna: Used to wirelessly

connect to 802.11b/g adapters.

LPT Port: Used to

connect a standard

parallel printer.

All manuals and user guides at all-guides.com

For Mac OS printing, please refer to manual (.pdf) located on the CD-ROM.

A. Insert one end of a straight-through CAT5 Ethernet cable into the DP-G321’s LAN Port.

Connect the other end to an Ethernet port on your gateway or switch.

B. Make sure that your Printer is turned OFF.

C. Attach one end of your printer cable to the appropriate port on the DP-G321 and the

other end to the corresponding port on your printer.

D. Turn ON the printer. Repeat steps B-D for each printer before proceeding to step E.

E. Plug one end of the power adapter into the DP-G321 and the other end into your electric

outlet. The DP-G321 will turn on and begin a self-test.

Note: Don’t connect the power cord to the DP-G321 until you are advised to do so.

Connecting the DP-G321 to Your

Network (continued)

The factory default IP address of the DP-G321 is 192.168.0.10. The IP address of the

DP-G321 must be in the same range as your network. You can change the IP address

of the DP-G321 to match the IP address scheme of your existing network. To access

the Print Server’s Web conﬁguration interface, assign an IP address on one of the wired

PCs on your network to the same IP scheme as the Print Server.

For additional Windows operating system setup or information on the Web-

management interface, refer to the manual located on the CD-ROM.

Conﬁguring the DP-G321

Go to Start > Right-click on

My Network Places > select Properties >

Right click on the Network Connection

associated with your Network Adapter and

select Properties.

Click Internet Protocol (TCP/IP)

Click Properties

All manuals and user guides at all-guides.com

Open your Web browser and

type http://192.168.0.10 into the

URL address box. Then press

the Enter or Return key.

Click OK to apply

the new settings

Conﬁguring the DP-G321 (continued)

Input a static IP address in the

same range as the print server.

(192.168.0.xx)

Click OK

Select Use the following IP address

IP address: 192.168.0.28

Subnet mask: 255.255.255.0

All manuals and user guides at all-guides.com

Conﬁguring the DP-G321 (continued)

The IP address of the DP-G321 can

be modiﬁed from the Network option

under the Conﬁguration tab.

This Quick Installation Guide will use

the Print Server’s default IP address

in all examples. Make the appropriate

changes if you have modiﬁed the DP-

G321’s IP address.

Click Site Survey

Click on the Wireless button under

the Conﬁguration tab to view the

wireless settings.

All manuals and user guides at all-guides.com

Conﬁguring the DP-G321 (continued)

Select the System button under the

Conﬁguration tab to view the Print

Server and Port names. If you change

the names of the ports, please make

note of them as they will be needed

during the Add Printer Wizard.

A list of available wireless networks will

appear. If you do not see the network

you are looking for, click Rescan at the

bottom of the page.

This screen only appears if you selected

a wireless network with WEP enabled.

If so, you must enter the encryption

information and click OK.

Click Select

All manuals and user guides at all-guides.com

all-guides.com

Click Next

Select Local Printer and

uncheck Automatically

detect and install my

Plug an Play printer.

The Add Printer Wizard

Click Next

For Windows XP:

Go to the Start menu> Printers and Faxes> Add a Printer

Double-click on the

Add Printer icon

All manuals and user guides at all-guides.com

The Add Printer Wizard (continued)

Click Next

The Port Name will ﬁll in automatically.

Click Next

Select Create a new port and

choose Standard TCP/IP Port

from the drop-down menu.

Type 192.168.0.10

All manuals and user guides at all-guides.com

Click Next

Click OK

Enter the Port name for the port

the printer is attached to.

Select LPR

Select Custom

and click the

Settings button

Default port names differ with the device MAC ID:

PS-xxxxxx-U1 (for USB Port 1)

PS-xxxxxx-U2 (for USB Port 2)

PS-xxxxxx-P3 (for LPT Port)

The Add Printer Wizard (continued)

All manuals and user guides at all-guides.com

In this window, scroll down and select

your printer manufacturer and model.

(If it is not listed, insert the driver

CD or diskette that came with your

printer and click Have Disk.)

Click Next

Click Finish

The printer name and default printer

settings are conﬁgured here.

Click Next

The Add Printer Wizard (continued)

All manuals and user guides at all-guides.com

Inhaltsverzeichnis

Andere D-Link Druckserver Handbücher

D-Link

D-Link DP-300 Bedienungsanleitung

D-Link

D-Link DP-303 Installationshandbuch

D-Link

D-Link DPR-1020 Bedienungsanleitung

D-Link

D-Link AirPlus DP-G310 Bedienungsanleitung

D-Link

D-Link AirPlus DP-G310 Bedienungsanleitung

D-Link

D-Link DPR-1040 Bedienungsanleitung

D-Link

D-Link DPR-1260 - RangeBooster G Multifunction Print... Bedienungsanleitung

D-Link

D-Link DP-101P+ Bedienungsanleitung

D-Link

D-Link AirPlus DP-G310 Bedienungsanleitung

D-Link

D-Link DP-G301 - Print Server - Parallel Bedienungsanleitung

D-Link

D-Link DPR-1061 Bedienungsanleitung

D-Link

D-Link Epress EtherNetwork DP-301P+ Bedienungsanleitung

D-Link

D-Link DP-300 Installationshandbuch

D-Link

D-Link DPR-1020 Bedienungsanleitung

D-Link

D-Link DP-300U Bedienungsanleitung

D-Link

D-Link 301P - DP Print Server Bedienungsanleitung

D-Link

D-Link DP-311P - Air Print Server Bedienungsanleitung

D-Link

D-Link AirPlus DP-G310 Bedienungsanleitung

D-Link

D-Link DP 301U Bedienungsanleitung

D-Link

D-Link DP-311U Bedienungsanleitung

D-Link

D-Link AirPlus G DP-G301 Bedienungsanleitung

D-Link

D-Link DPR-2000 Bedienungsanleitung

D-Link

D-Link DP-311U Bedienungsanleitung

D-Link

D-Link DP-301P Montageanleitung

Beliebte Druckserver Handbücher anderer Marken

Digitus

Digitus DN-13003-1 Bedienungsanleitung

Edimax

Edimax PS-1206PWg Bedienungsanleitung

Intellinet

Intellinet 509077 Bedienungsanleitung

Atlantis Land

Atlantis Land NETSERVER A02-PSU_GX02 Bedienungsanleitung

Buffalo

Buffalo LPV4-U2-300S Bedienungsanleitung

Zonet

Zonet ZPS1000 Bedienungsanleitung

TRENDnet

TRENDnet TEW-P11G Bedienungsanleitung

Axis

Axis 140 BJC Bedienungsanleitung

HP Jetdirect 280m - 802.11b Wireless Print... Bedienungsanleitung

MicroNet

MicroNet SP766W Bedienungsanleitung

NETGEAR

NETGEAR PS104 - Hub - EN Bedienungsanleitung

Axis

Axis AXIS 1610 Bedienungsanleitung

Buffalo

Buffalo LPV4-U2-300S Bedienungsanleitung

Axis

Axis 5600+ Bedienungsanleitung

LevelOne

LevelOne WPS-9123 Bedienungsanleitung

NETGEAR

NETGEAR PS105 Bedienungsanleitung

Xerox

Xerox FreeFlow Print Server V9 SP3 Bedienungsanleitung

SEH

SEH primos Bedienungsanleitung