D-Link DPR-1020 Bedienungsanleitung

USB MULTI-FUNCTION PRINT SERVER

Quick Install Guide+

Руководство по быстрой установке+

Guía de instalación rápida+

Guia de instalação rápida+

快速安裝手冊+

Petunjuk Pemasangan Cepat+

DPR-1020

This product can be set up using

any current web browser, i.e.,

Internet Explorer 6 or Netscape

Navigator 7.0

5V DC, 2.5A

Power Adapter

holders. Software and specications subject to change without notice.

Before You Begin

Check Your Package Contents

DPR-1020 USB Multi-Function Print Server

CD-ROM (Software, Manual and Warranty)

Ethernet (CAT5 UTP) Cable

If any of the above items are missing, please contact your reseller.

This Quick Installation Guide provides you with step-by-step instructions to set up

your MFP Server and start your printing tasks. The model you have purchased may

be slightly different from those seen in the illustrations. For more detailed information

regarding the Print Server, please refer to the User’s Manual that is included in your

installation CD.

NOTE: The images and setting values in this manual are FOR YOUR REFERENCE ONLY.

The actual settings and values depend on your Print Server, system and network.

Using a power supply

with a differe n t

voltage rating will damage

this product and void its

warranty.

DPR-1020

USB Multi-Function

Print Server

EXTERNAL FEATURES

Physical Interfaces

USB Port

Ethernet Port (LAN)

DC Power Connector

Reset Button (Bottom Panel)

The DPR-1020’s USB port is located on the rear panel. The port can be congured

using the web congurator which allows users to congure settings through their

web browser.

The default IP address of the DPR-1020 is automatically acquired from a DHCP

server on the network. If a DHCP server cannot be found the default IP address for

the DPR-1020 will be 192.168.0.10.

NOTE : The PC’s IP address must be in the same subnet as the Print Server’s IP

address for the two devices to communicate. (For example, if the Print

server’s IP address is 192.168.0.10, with a subnet mask of 255.255.255.0,

then your computer’s IP address should be 192.168.0.x, where x is a value

between 1-254, excluding 10.)

The Print Server’s rear panel features an RJ-45 port for the connection of a

10/100Mbps CAT 5 Ethernet cable. The port supports the NWay protocol, allowing

the Print Server to automatically detect or negotiate the transmission speed of the

network.

The DC power input connector is located on the Print Server’s rear panel and is

labeled DC 5V.

Press and release this button to reset the MFP Server. To restore the device to

factory default settings , press and hold the button for three seconds until the USB

LED on the front panel lights up and then release the button.

DC Power Connector

USB Port

LED INDICATORS

Power

USB

Link/Act

The top panel of the Print Server features three LED indicators:

A steady blue light conrms that the Print Server is turned ON.

A steady blue light indicates the printer is online and successfully connected to

the print server. This light will also blink to indicate that data is being transferred

between the print server and printer.

A steady blue light conrms that the Print Server has a connection to an Ethernet

network. This light will also blink when receiving or transmitting data on the

network.

These three LED indicators are also used during the device’s power-on self test to

indicate any hardware failures. Please refer to the User Manual for more information

about this test.

HARDWARE INSTALLATION

WARNING: There may be conguration problems if the Print Server is turned on

without rst establishing a network connection.

Follow the steps below to avoid any complications during the hardware

installation:

1. Conrm that the printer you will use to connect to the DPR-1020 is operating

correctly.

2. When you have conrmed that the printer is operating correctly, switch its power

OFF.

3. Conrm that your network is operating normally.

4. Using a CAT 5 Ethernet cable, connect the DPR-1020 Ethernet Port (labelled

LAN) to the network.

5. While the printer is turned OFF, connect the USB printer cable to the printer and

then to the USB port on the Print Server.

6. Switch on the printer.

7. Insert the power adapter’s output plug into the DC 5V power socket on the rear

panel of the Print Server.

8. Connect the other end of the power adapter into a power outlet. This will supply

power to the Print Server. The blue LED on the Print

PS SOFTWARE INSTALLATION

PS Software (Windows Vista/XP/2003/2000) includes both PS-Link and PS-

Wizard. PSLink can help you set up your printer for multi-function printing using

your manufacturer’s drivers. PS-Wizard is a utility that enables you to easily add a

printer to your computer.

These utilities can also congure additional Print Server settings. Please refer to the

user’s manual for more information.

To install PS Software, insert the included installation CD into your computer’s CD-

ROM drive to initiate the auto-run program.

NOTE: If auto-run does not start you can access the CD-ROM contents in Windows

by clicking My Computer > [CD-ROM Drive Letter].

Installation

The content of the Installation CD-ROM includes:

• Install Acrobat Reader – click this to install Acrobat Reader onto your computer.

This enables you to view the manual and Quick Installation Guide in PDF format.

• Install PS Software – click this to install the PS Software, which contains PS-Link

and PS-Wizard.

• View Quick Installation Guide - click this to see the Quick Installation Guide in

PDF format for step-by-step instructions of the print server Installation.

• View Manual – click this to see the User Manual in PDF format for more detailed

information regarding the print server.

• Exit – click to close the Auto-Run program.

PS SOFTWARE INSTALLATION

After clicking Install PS Software

the following screen will appear.

To change the default installation

location, click Browse.

In this screen you can change the

name of the installation folder. The

default name is PS Software.

Click Next

PS SOFTWARE INSTALLATION

To nish the installation of the PS

Software, click Finish.

To access the utilities, click Start >

Programs > PS Software and select

the utility you wish to use.

Click Finish

Technical Support

You can nd software updates and user documentation on the D-Link website.

Tech Support for customers in

Australia:

Tel: 1300-766-868

24/7(24Hrs, 7days a week) technical support

http://www.dlink.com.au

e-mail: [email protected]

India:

Tel: 1800-222-002

9.00 AM to 9.00 PM. All days

http://www.dlink.co.in/support/productsupport.aspx

Indonesia, Malaysia, Singapore and Thailand:

Tel: +62-21-5731610 (Indonesia)

Tel: 1800-882-880 (Malaysia)

Tel: +65 6501 4200 (Singapore)

Tel: +66-2-719-8978/9 (Thailand)

24/7, for English Support Only

http://www.dlink.com.sg/support/

e-mail: [email protected]

Korea:

Tel: +82-2-2028-1815

Monday to Friday 9:00am to 6:00pm

http://www.d-link.co.kr

e-mail: [email protected]

New Zealand:

Tel: 0800-900-900

24/7(24Hrs, 7days a week) technical support

http://www.dlink.co.nz

e-mail: [email protected]

Andere Handbücher für DPR-1020

Inhaltsverzeichnis

Andere D-Link Druckserver Handbücher

D-Link

D-Link 301P - DP Print Server Bedienungsanleitung

D-Link

D-Link DP-G301 - Print Server - Parallel Bedienungsanleitung

D-Link

D-Link DPR-1061 Bedienungsanleitung

D-Link

D-Link AirPlus G DP-G310 Bedienungsanleitung

D-Link

D-Link DPR-1260 - RangeBooster G Multifunction Print... Bedienungsanleitung

D-Link

D-Link DPR-1061 Bedienungsanleitung

D-Link

D-Link DP-301P Montageanleitung

D-Link

D-Link DP 301U Bedienungsanleitung

D-Link

D-Link DPR-1061 Bedienungsanleitung

D-Link

D-Link DP-311U Bedienungsanleitung

D-Link

D-Link DP-100+ Bedienungsanleitung

D-Link

D-Link DP-300+ Bedienungsanleitung

D-Link

D-Link DP 301U Bedienerhandbuch

D-Link

D-Link DP-802 Bedienungsanleitung

D-Link

D-Link DP-313 - Air 802.11b Wireless Print Server Bedienungsanleitung

D-Link

D-Link DP 301U Bedienungsanleitung

D-Link

D-Link DP 301U Bedienungsanleitung

D-Link

D-Link DI-713P Bedienungsanleitung

D-Link

D-Link AirPlus DP-G310 Bedienungsanleitung

D-Link

D-Link DP-101P - Pocket Ethernet Print Server Bedienungsanleitung

D-Link

D-Link DP 301U Bedienungsanleitung

D-Link

D-Link DPR-2000 Bedienungsanleitung

D-Link

D-Link AirPlus DP-G310 Bedienungsanleitung

D-Link

D-Link DP-313 - Air 802.11b Wireless Print Server Bedienungsanleitung

Beliebte Druckserver Handbücher anderer Marken

Digitus

Digitus DN-13003-1 Bedienungsanleitung

Edimax

Edimax PS-1206PWg Bedienungsanleitung

Intellinet

Intellinet 509077 Bedienungsanleitung

Atlantis Land

Atlantis Land NETSERVER A02-PSU_GX02 Bedienungsanleitung

Buffalo

Buffalo LPV4-U2-300S Bedienungsanleitung

Zonet

Zonet ZPS1000 Bedienungsanleitung

TRENDnet

TRENDnet TEW-P11G Bedienungsanleitung

Axis

Axis 140 BJC Bedienungsanleitung

HP Jetdirect 280m - 802.11b Wireless Print... Bedienungsanleitung

MicroNet

MicroNet SP766W Bedienungsanleitung

NETGEAR

NETGEAR PS104 - Hub - EN Bedienungsanleitung

Axis

Axis AXIS 1610 Bedienungsanleitung

Buffalo

Buffalo LPV4-U2-300S Bedienungsanleitung

Axis

Axis 5600+ Bedienungsanleitung

LevelOne

LevelOne WPS-9123 Bedienungsanleitung

NETGEAR

NETGEAR PS105 Bedienungsanleitung

Xerox

Xerox FreeFlow Print Server V9 SP3 Bedienungsanleitung

SEH

SEH primos Bedienungsanleitung