D-MAX STANDALONE H.264 Bedienungsanleitung
STANDALONE H.264
DIGITAL VIDEO RECORDER
USER MANUAL
2
Before usage
The User manual is for DVR installation and operation.
The User who install the device first or Qualified Personal, before installing DVR, has to read user
manual carefully and follow warning instructions avoiding malfunction of operation or product
failure. Refer all servicing to qualified service personnel or suppliers while install and set the DVR.
Keep these operation instructions handy for future reference.
Warnings for safety
The user has to keep in mind of followings for safety usage and well-operation.
ㆍ Do not shock during installation or Product carried
ㆍ Do not expose to shock or vibration.
ㆍ Do not move while the product is operating.
ㆍ Do not plug out while the product is operating.
ㆍ After power off, clean the DVR only dry towel.
ㆍ Do not put out Plug code, touch power plug with wet hands.
ㆍ Do not place heavy object on power code, it may cause power code damage, occur fire or
electric shock
ㆍ Install stable place and keep proper temperature, if install the DVR in sealed place, it may
cause a fire. .
ㆍ Do not install humidity place, electronic hazard, moisture.
ㆍ Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptables.
ㆍ Recommend to use protect device to prevent failure through blackout or lighting.
ㆍ Do not expose direct sunlight and install near radiators, heat registers or other apparatus
that produce heat.
ㆍ Do not place near flammable spray or any heat source, cause of flammable material,
it may cause a fire
ㆍ Do not damage, Blend, twist, modified, pull out, heat power code, it may cause damage
power code or outlet.
ㆍ Do not insert the metals such as a coin, a hair pin, a piece of iron or flammable Material such
as a paper, a matchstick, etc. in the DVR, It may cause a fire or an electric shock
ㆍ Contact the supplier after turn off the DVR, when odor smoke or smell in the DVR.
3
Approved HDD List
(February, 2011)
Capacity Manufacturer HDD MODEL Name F/W Ver.
250G
Western Digital
HDD 250G
SATA
WD2500AVVS 63L2BO
WD2500AAJS 22B4A0
Hitachi
HDS721025CLA382
HDS721025CLA382
HCS5C1025CLA382
Seagate ST3250312CS SC13
320G Seagate HDD 320G
SATA ST3320418AS CC38
500G
Western Digital
HDD 500G
SATA
WD5000AVVS 63H0B1
Seagate ST3500418AS CC38
ST3500312CS SC13
Hitachi HCS5C1050CLA382
Hitachi HDS721050CLA362
750G Western Digital HDD 750G
SATA WD7500AACS
1TB Seagate HDD 1TB SATA
ST31000528AS CC38
ST31000322CS
WD10EADS 00L5B1
HCS5C1010CLA382
HDS721010CLA332
1.5TB Seagate HDD 1.5TB
SATA
ST31500341AS
Western Digital WD15EARS 00Z5B1
2TB
Seagate
HDD 2TB SATA
ST32000542AS
Western Digital WD20EARS 00Z5B1
Hitachi HDS722020CLA330
[Warning] Please use approved HDD avoiding malfunctions of operation, if the user want
to use other HDD, Please contact to supplier and check the HDD is available or not.
4
- CONTENTS -
1. OVERVIEW
∙ Features ………………………………………………………………………………………………………..……………………….…...……..6
2. INSTALLATION
∙ Package Contents .………………………...………………………….…………………………………………………………….…..…….7
∙ Part Names and Functions (Front) …………………….………………………………………………………………....….……...8
∙ Part Names and Functions (Rear) …………………..…………………………………………………………………….….………9
3. SYSTEM OPERATION
∙ Menu Setup ……………….…………………….……………………………………………………………………..………………...…….10
∙ Icons ……………………….……………………………………………………………………………………………………..……………..…10
∙ Using Remote Control …………………………………………………………………………………….………………………….…..12
∙ How to setup Remote ID ……………………………………..…………………………………………………………….…….…....13
4. SYSTEM CONFIGURATION
∙ System Setup ……………….…………………………………………………………………………………..…..……..………………….15
∙ Time/Date ……………….…………………….……………………………………………………………….………………...…….…….…16
∙ Password ……………….………………………..…………………………………….……………………………………………….…….….17
∙ Hard Disk ……………….………………………………….……………………………………………………………………….……..…….17
∙ Default Setup ……………….…………………..…………………………………………………………………………….…..…….…….19
∙ Upgrade ……………….………………………………………………………………………………………………………………………....19
∙ Button Setup ……………….…..………..……………………………………………………………………….……………….….….……20
∙ RS-485 ……………….……………………………..……………………………………………………………….……………….….….…….21
5. DISPLAY SETUP
∙ OSD ………………..……………………………………………………............................................................................................….22
∙ Auto Sequence ………………..……….………………..…………………………………………………..……………..…..…………….22
∙ TV Adjustment ……………….………..…….…………..………………………………………………………………..………..…..……23
6. NETWORK SETUP
∙ IP Address Setup ………………...…………………..………………………………………………………………….…………….…….24
∙ Web Server ………………..………………………..……………………………………………………………………...………….……….25
7. CAMERA SETUP
5
∙ Camera …………………...…………………….………………………………………………………………………..……..………….…..…26
∙ PTZ Setting ……………………………..…………………………….….…………………………………………………………….....……26
∙ Using Pan/Tilt ………………………….……………………….…………………………………………………………………..…....……28
8. RECORD SETUP
∙ Recording Setting …………………..….…………………………..……….……………………………………………………...……….30
∙ Schedule Record …………………..…….…………………………..……….……………………………………………………..……….31
∙ Holiday Record ………………….……..........…………………………..……….………………………………………………...……….32
9. EVENT SETUP
∙ Sensor ……………………………………...…..……………………………………………………………………………………….…………34
∙ Motion Detection …………………..….……………………..………………………………………………………………...……..……34
∙ Camera Tamper Detection ……………………...……………….…………………………………………………..…………....……36
∙ Event Action …………………..……………………………………………………………………………………….…………………..…..36
10. SEARCH SETUP
∙ Search ………………….…………………………………..…………………………………………………………….…………………..……41
∙ Calendar Search ………………….…………………..…………………………………………………………….…………………..……41
∙ Date/Time Search ………………….………………………..………………………………………………………………………………43
∙ Event Serach …………………..…..………………………..…………………………………………………………………………….……44
∙ Play Control ………………….……………..………………..……….………………………………….…………………….……….…......45
∙ Audio …………………...…………………………..……….………………………………………………………….……………….……......46
11. BACKUP SETUP
∙ Bckup …………………………………………………………..……………………………………………….……………………….…………47
12. APPENDIX
∙ Specification ……………………………...……………..…………………………………………………………….……………....………52
∙ Product Warranty ………………………………………...………………………………………………………………………………….53
1. OVERVIEW
6
The DVR employs H.264 video encording 4 channel input, audio encoding for 4 channels while
simultaneously supports hard disk recording and playback. The DVR has mirroring function,
mirroring HAD record and display regardless of unexpected physical shock or demage.
Main Features
ㆍControl Pan / Tilit by using Mouse or Joystick
ㆍ2 USB ports for easy back-up
ㆍODD Back up available (Option)
ㆍFull Frame transfer under GIGA network available
ㆍMulti language
ㆍDynamic IP Internet access available
ㆍDual-Stream network transfer available
ㆍSupport D1 resolution each channel independently
ㆍCMS software
ㆍProvide software for Smart phone, IP viewer, Network Viewer
Application
√ Bank, ATM unit, Supermarket, Convenient store and other public places.
√ Private homes, Apartment, Jewelry shop, Commercial compound and other places
where it needs anti theft surveillance system.
√ Warehouse, Production line and other places where evidence is needed
after any event happened and to analyze the situation.
√ Where to monitor sites remotely
2. INSTALLATION
Features
7
Please unpack the product, and place the product on a flat place or in the place to be installed.
Please check the following contents are included in addition to the main unit.
Packa
g
e Contents
Part Names and Functions (Front)
DIGITAL VIDEO RECORDER
HDD Fixing Screws (5pcs)
Batteries for
Remote Control
(AAAX2)
Adaptor
Remote
Controller
Power
Cable
User Manual
CD
8
(Front Panel)
[1] Sequence of 4-Split and Auto Sequence in order by pressing more than 3 seconds
[2] USB Connection Port
[3] Channel Keys
[4] Remote Control Receiver LED
[5] LED Indicator (Power/REC/HDD Status/Network)
[6] Buttons for Direction / Select / Play / Pause
[7] MENU
[8] PTZ Control
[9] Search
[10] Audio
[11] Emergency Recording
[12] Backup
Part Names and Functions (Rear)
9
[1] Audio Out : Output Port for the Audio Signal
[2] Audio In (1~4) : Input Port for the Audio Signal
[3] Video In : Input Port for composite Video Signal
[4 Video Out : BNC Type of Output Port for the composite Video Signal
[5] VGA : Output Port for VGA Video Signal
[6] NETWORK : Network Connection Port
[7] Alarm / Sensor / RS-485 (When you connect to PTZ Cameras)
( Refer to the detailed settings in each part in the manual.)
[8] Power : Port to be connected to DC 12V/3.5A Power Source
10
3. SYSTEM OPERATION
The MENU can be operated by pressing the Front Menu Button or using the Remote Control.
☞ Using Front Buttons
1) Press the “MENU” Button.
2) Use the Direction Keys and to selece the MENU and “MENU” Button for “ESC”
☞ Using Remote Control
-Press “SETUP” Button .
☞ Using Mouse
1) Right-click any area of the screen and the MENU will pop up.
2) Left-click to enter the MENU.
[1] The Icons indicate the Status in Live Mode.
[2] CAM ID : Camera ID will be shown same as the below picture.
Icons
Menu Setu
p
Inhaltsverzeichnis
Andere D-MAX DVR Handbücher
