Dell PowerEdge 1800 Handbuch

www.dell.com | support.dell.com

Dell™ PowerEdge™ 1800 Systems

Installing the

Tower-to-Rack and

Rack-to-Tower Kits

P2648bk0.book Page 1 Thursday, October 14, 2004 11:18 AM

P2648bk0.book Page 2 Thursday, October 14, 2004 11:18 AM

www.dell.com | support.dell.com

Dell™ PowerEdge™ 1800 Systems

Installing the

Tower-to-Rack and

Rack-to-Tower Kits

P2648bk0.book Page 1 Thursday, October 14, 2004 11:18 AM

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Abbreviations and Acronyms

For a complete list of abbreviations and acronyms, see the “Glossary” in the User’s Guide.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

July 2004 P/N P2648 Rev. A00

P2648bk0.book Page 2 Thursday, October 14, 2004 11:18 AM

Contents 3

Contents

Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

SAFETY: Rack Mounting of Systems . . . . . . . . . . . . . . . . . . 5

Tower-to-Rack Kit Instructions . . . . . . . . . . . . . . . . . . . . . . . 6

Removing the Bezel . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Removing the System Stabilizer Feet . . . . . . . . . . . . . . . . . . 7

Attaching the Rack-Adapter Plate . . . . . . . . . . . . . . . . . . . 8

Attaching the Rack Handles . . . . . . . . . . . . . . . . . . . . . . 10

Attaching the Slide-Shoulder Screws . . . . . . . . . . . . . . . . . 10

Rack-to-Tower Kit Instructions . . . . . . . . . . . . . . . . . . . . . . . 11

Removing the Slide-Shoulder Screws . . . . . . . . . . . . . . . . . 12

Removing the Rack Handles . . . . . . . . . . . . . . . . . . . . . . 13

Attaching the Side Cover . . . . . . . . . . . . . . . . . . . . . . . 13

Attaching the System Stabilizer Feet . . . . . . . . . . . . . . . . . . 15

Installing the Bezel . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Stabilizing the Tower System. . . . . . . . . . . . . . . . . . . . . . 16

Figures

Figure 1-1. Tower-to-Rack Kit Contents . . . . . . . . . . . . 6

Figure 1-2. Removing the Bezel . . . . . . . . . . . . . . . . 7

Figure 1-3. Removing the System Stabilizer Feet . . . . . . . . 8

Figure 1-4. Removing the Right-Side Cover . . . . . . . . . . 9

Figure 1-5. Installing the Rack-Adapter Plate . . . . . . . . . 9

Figure 1-6. Installing the Rack Handles . . . . . . . . . . . . 10

Figure 1-7. Installing the Slide-Shoulder Screws . . . . . . . . 11

Figure 1-8. Rack-to-Tower Kit Contents . . . . . . . . . . . . 12

Figure 1-9. Removing the Slide-Shoulder Screws . . . . . . . 12

Figure 1-10. Removing the Rack Handles . . . . . . . . . . . . 13

Figure 1-11. Removing the Rack-Adapter Plate . . . . . . . . . 14

P2648bk0.book Page 3 Thursday, October 14, 2004 11:18 AM

4Contents

Figure 1-12. Installing the System Side Cover . . . . . . . . . . 14

Figure 1-13. Attaching the System Stabilizer Feet . . . . . . . . 15

Figure 1-14. Rotating the Tower System Stabilizer Feet . . . . . 16

P2648bk0.book Page 4 Thursday, October 14, 2004 11:18 AM

Installing the Tower-to-Rack and Rack-to-Tower Kits 5

Safety Instructions

Use the following safety guidelines to ensure your own personal safety and to help protect your

system and working environment from potential damage. For complete safety information, see

your

Product Information

Guide

SAFETY: Rack Mounting of Systems

Observe the following precautions for rack stability and safety.

Systems are considered to be components in a rack. Thus, "component" refers to any system as well

as to various peripherals or supporting hardware.

CAUTION: Installing systems in a rack without the front and side stabilizers installed could cause the

rack to tip over, potentially resulting in bodily injury under certain circumstances. Therefore, always

install the stabilizers before installing components in the rack.

After installing system/components in a rack, never pull more than one component out of the rack on its

slide assemblies at one time. The weight of more than one extended component could cause the rack to

tip over and injure someone.

NOTE: Your system is safety-certified as a free-standing unit and as a component for use in a rack

cabinet using the customer rack kit when both the rack cabinet and rack kit were designed for your

system. The installation of your system and rack kit in any other rack cabinet has not been approved by

any safety agencies. It is your responsibility to have the final combination of system and rack kit in a

cabinet evaluated for suitability by a certified safety agency. The manufacturer disclaims all warranties

and liability in connection with such combinations.

•

System rack kits are intended to be installed in an approved rack by trained service

technicians. If you install the kit in any other rack, be sure that the rack meets the

specifications.

• Before you work on the rack, ensure that the stabilizers are secured to the rack, extended to

the floor, and that the full weight of the rack rests on the floor. Install front and side stabilizers

on a single rack or front stabilizers for joined multiple racks before working on the rack.

• Always load the rack from the bottom up, and load the heaviest item in the rack first.

• Ensure that the rack is level and stable before extending a component from the rack.

• Use caution when pressing the component rail release latches and sliding a component into or

out of a rack; the slide rails can pinch your fingers.

• After a component is inserted into the rack, carefully extend the rail into a locking position,

and then slide the component into the rack.

• Do not overload the AC power supply branch circuit that provides power to the rack.

The total rack load should not exceed 80 percent of the branch circuit rating.

• Ensure that proper airflow is provided to components in the rack.

• Do not step on or stand on any system/component when servicing other components in a

rack.

P2648bk0.book Page 5 Thursday, October 14, 2004 11:18 AM

6Installing the Tower-to-Rack and Rack-to-Tower Kits

www.dell.com | support.dell.com

Tower-to-Rack Kit Instructions

NOTE: For instructions on how to install the rack-to-tower kit, see "Rack-to-Tower Kit Instructions."

This section provides instructions on how to install the tower-to-rack kit. After you install this kit

on your system, see the documentation that came with your rack kit for instructions on how to

install the system into the rack.

The tower-to-rack kit includes the items listed below. See Figure 1-1.

• Two rack handles with attached thumbscrews.

• One rack-adapter plate.

• Six hex-head Phillips screws.

• Six slide-shoulder screws.

Figure 1-1. Tower-to-Rack Kit Contents

Removing the Bezel

Turn off the system, including any attached peripherals, and disconnect the system from the

electrical outlet.

Rotate the four bottom-panel system stabilizer feet inward. and lay the system on its side. See

Figure 1-2.

Use the system key to unlock the front bezel.

Slide the latch down and pull the right edge of the bezel away from the front panel.

rack handles (2)

hex-head Phillips

screws (6)

slide-shoulder

screws (6)

rack-adapter plate

P2648bk0.book Page 6 Thursday, October 14, 2004 11:18 AM

Installing the Tower-to-Rack and Rack-to-Tower Kits 7

Pivot the bezel outward until it is at a right angle to the front panel.

Remove the bezel from the slots on the front panel.

Figure 1-2. Removing the Bezel

Removing the System Stabilizer Feet

Remove the screws that secure the system stabilizer feet to the chassis. See Figure 1-3.

keylock

latch

bezel

P2648bk0.book Page 7 Thursday, October 14, 2004 11:18 AM

8Installing the Tower-to-Rack and Rack-to-Tower Kits

www.dell.com | support.dell.com

Figure 1-3. Removing the System Stabilizer Feet

Attaching the Rack-Adapter Plate

Remove the system’s right-side cover:

Remove the two back-panel screws that secure the right-side cover to the chassis. See

Figure 1-4.

Slide the right-side cover toward the back of the system and then lift it away from the

chassis.

system stabilizer feet (4)

securing screws (4)

P2648bk0.book Page 8 Thursday, October 14, 2004 11:18 AM

Andere Handbücher für PowerEdge 1800

Inhaltsverzeichnis

Andere Dell Server Handbücher

Dell

Dell PowerEdge T710 Bedienerhandbuch

Dell

Dell PowerEdge M1000e Bedienungsanleitung

Dell

Dell Wyse 5000 Series Bedienungsanleitung

Dell

Dell X95FF Handbuch

Dell

Dell PowerEdge R530 Bedienungsanleitung

Dell

Dell DX6012S Bedienungsanleitung

Dell

Dell PowerEdge R905 Bedienungsanleitung

Dell

Dell PowerEdge 2450 Technisches Handbuch

Dell

Dell PowerEdge C4130 Bedienungsanleitung

Dell

Dell PowerEdge 2410 Bedienungsanleitung

Dell

Dell PowerEdge R510 Bedienungsanleitung

Dell

Dell PowerEdge C6320 Bedienungsanleitung

Dell

Dell PowerEdge FC640 Handbuch

Dell

Dell PowerEdge 2850 Bedienungsanleitung

Dell

Dell DX6000G Bedienungsanleitung

Dell

Dell PowerEdge C410X Bedienungsanleitung

Dell

Dell PowerEdge NX182 Bedienungsanleitung

Dell

Dell POWEREDGE 4300 Leitfaden

Dell

Dell PowerEdge R730 Bedienungsanleitung

Dell

Dell DX6000 Bedienungsanleitung

Dell

Dell Wyse P25 Bedienungsanleitung

Dell

Dell PowerEdge R230 Bedienungsanleitung

Dell

Dell Wyse 7030 Bedienungsanleitung

Dell

Dell PowerEdge R630 Kurzanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch