Dell PowerEdge 2420 Bedienungsanleitung

Dell™ PowerEdge™ 2420

Installation Guide

Guide d’installation

Installationsanleitung

設置ガイド

Guía de instalación

Dell™ PowerEdge™ 2420

Installation Guide

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use

of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data

if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal

injury, or death.

____________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

October 2008 P/N T084M Rev. A00

Contents 3

Contents

Safety Instructions. . . . . . . . . . . . . . . . . . . . . 5

SAFETY: Rack Mounting of Systems . . . . . . . . . 5

Installation Instructions . . . . . . . . . . . . . . . . . . 5

Rack Requirements . . . . . . . . . . . . . . . . . . 6

Rack Installation. . . . . . . . . . . . . . . . . . . . . . 6

Before You Begin . . . . . . . . . . . . . . . . . . . 6

Installation Tasks . . . . . . . . . . . . . . . . . . . 7

Recommended Tools and Supplies. . . . . . . . . . 7

Removing and Replacing the Rack Doors . . . . . . 8

Removing and Replacing the Side Panels . . . . . 11

Reversing the Front Door (optional) . . . . . . . . 12

Securing the Rack Leveling Feet . . . . . . . . . . 18

Installing the Rack Stabilizer Feet . . . . . . . . . 20

Adjusting the Rack Posts (optional) . . . . . . . . 22

Routing Cables . . . . . . . . . . . . . . . . . . . 23

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4Contents

Installation Guide 5

Safety Instructions

Use the following safety guidelines to ensure your own personal safety and

to help protect your system and working environment from potential damage.

For complete safety and regulatory information, see the safety instructions

that shipped with your system. Warranty information might be included in

this document or as a separate document.

SAFETY: Rack Mounting of Systems

Observe the following precautions for rack stability and safety. Also refer to

the rack installation documentation accompanying the system and the rack

for specific caution statements and procedures.

Systems are considered to be components in a rack. "Component" refers

to any system as well as to various peripherals or supporting hardware.

CAUTION: Instructions for Rack-Mounted Systems:

• Your rack kit has been approved only for the rack cabinet provided. It is

your responsibility to ensure that installation of the equipment into any

other rack complies with all applicable standards. Dell disclaims all liability

and warranties with respect to combinations of equipment with any other

rack.

• Before installing your equipment in a rack, install all front and side

stabilizers. Failure to install stabilizers can allow the rack to tip over.

• Always load from the bottom up, and load the heaviest items first.

• Do not overload the AC power supply branch circuit that provides power

to the rack.

• Do not stand or step on any components in the rack.

Installation Instructions

This installation guide provides instructions for trained service technicians

installing a 24-unit (U) rack. Information includes assembling the rack

and routing cables through the rack. The 24-U rack can be installed using

the recommended tools.

6Installation Guide

Rack Requirements

CAUTION: The 24-U rack meets the specifications of American National

Standards Institute (ANSI)/Electronic Industries Association (EIA) standard

ANSI/EIA-310-D-92, Consumer Electronics Association (CEA) Standard CEA-310-E,

International Electrotechnical Commission (IEC) 297, and Deutsche Industrie Norm

(DIN) 41494.

Rack Installation

Before attempting this installation, you should read through this entire

procedure carefully.

Before You Begin

WARNING: Before you begin installing your rack, carefully read "Important

Safety Information," as well as the safety instructions that came with the rack.

WARNING: When installing multiple systems in a rack, complete all of the

procedures for the current system before attempting to install the next system.

WARNING: Rack cabinets can be extremely heavy and move easily on the

casters. The cabinet has no brakes. Use extreme caution while moving the rack

cabinet. Retract the leveling feet when relocating the rack cabinet. Avoid long or

steep inclines, rough surfaces, or ramps where loss of cabinet control may occur.

Extend the leveling feet for support and to prevent the cabinet from rolling.

WARNING: Avoid rolling the rack cabinet over rough surfaces. Hard impacts to

the casters could cause them to break, and the rack could become unstable and

tip over.

WARNING: Do not attempt to move your rack with components installed.If you

move a fully loaded rack on a slightly uneven floor surface, the rack may become

unstable and tip over.

Important Safety Information

Observe the safety precautions in the following subsections when installing

your system in the rack.

WARNING: You must strictly follow the procedures in this document to protect

yourself as well as others who may be involved. Your system may be very large

and heavy, and proper preparation and planning are important to prevent injury

to yourself and to others. This becomes increasingly important when systems

are installed high up in the rack.

Installation Guide 7

WARNING: For stability, you must ensure that a minimum of 50 lbs. is installed

in the bottom 3-U spaces of the rack cabinet.

Rack Stabilizer Feet

WARNING: Installing systems in a rack without the front and side stabilizer feet

installed could cause the rack to tip over, potentially resulting in bodily injury

under certain circumstances. Therefore, always install the stabilizer feet before

installing components in the rack.

WARNING: After installing systems in a rack, never pull more than one system

out of the rack on its slide assemblies at one time. The weight of more than one

extended system could cause the rack to tip over and cause injury.

The stabilizer feet help prevent the rack from tipping over when a system

or other component is pulled out of the rack with the slide assemblies fully

extended.

Installation Tasks

Installing a rack cabinet involves performing the following tasks:

Removing and replacing the rack doors

Removing and replacing the side panels

Reversing the front door and badge (optional)

Securing the leveling feet

Installing the stabilizer feet

Adjusting the rack posts (optional)

Routing cables through the rack

Recommended Tools and Supplies

You may need the following tools and supplies to install the rack:

• #2 Phillips screwdriver

• Flat head screwdriver

• 12-mm wrench

• Needle-nose pliers

• 4-mm Allen wrench (if you want to reverse the direction the front

door opens)

8Installation Guide

• Keys to the rack doors and side panels (included in the rack kit)

• 13-mm wrench (for rack removal from pallet)

• 17-mm wrench (for rack removal from pallet)

Removing and Replacing the Rack Doors

WARNING: When storing the doors, lay the doors flat so they cannot fall

over and accidentally injure someone.

Removing the Front Door

Pull the door latch and open the front door all the way (see Figure 1-1).

While holding the door, pull the top hinge pin upward so that it clears

the door’s hinge-pin housing (see Figure 1-1).

The hinge pin’s retention clip prevents the hinge from being pulled out

of the hinge body.

Figure 1-1. Removing the Front Door

1 door latch 2 hinge pin

3 hinge body 4 hinge-pin housing

Andere Handbücher für PowerEdge 2420

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Dell Server Handbücher

Dell

Dell PowerEdge R310 Bedienungsanleitung

Dell

Dell DX6000 Bedienungsanleitung

Dell

Dell PowerEdge C6105 Bedienungsanleitung

Dell

Dell PowerEdge C8220 Bedienungsanleitung

Dell

Dell PowerEdge R420xr Bedienungsanleitung

Dell

Dell PowerEdge C2100 Bedienungsanleitung

Dell

Dell PowerEdge R620 Bedienungsanleitung

Dell

Dell PowerEdge 2400 Allgemeine Anweisungen

Dell

Dell EMC VxFlex Ready Node 13G Bedienungsanleitung

Dell

Dell PowerEdge 4350 Bedienungsanleitung

Dell

Dell DR6300 Bedienungsanleitung

Dell

Dell EMC PowerEdge R440 Handbuch

Dell

Dell PowerApp 220 Bedienungsanleitung

Dell

Dell PowerConnect W-AirWave 7.6 Bedienungsanleitung

Dell

Dell Precision R5500 Betriebsanleitung

Dell

Dell DL4300 Bedienungsanleitung

Dell

Dell PowerEdge T620 Kurzanleitung

Dell

Dell PowerEdge PDU Managed LED Bedienungsanleitung

Dell

Dell XC730xd Bedienungsanleitung

Dell

Dell PowerEdge R720 t Kurzanleitung

Dell

Dell PowerEdge M420 Bedienungsanleitung

Dell

Dell PowerEdge T710 Kurzanleitung

Dell

Dell PowerEdge C6220 Handbuch

Dell

Dell PowerEdge 2410 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch