Dell PowerEdge 1800 Handbuch

Rack Installation Guide

Guide d'installation en rack

Rack-Installationsanleitung

ラック取り付けガイド

Guía de instalación del rack

Rack Installation Guide

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid

the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: RapidRails and VersaRails are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names

or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

May 2004 P/N N2963 Rev. A00

Contents 1-3

Contents

Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

SAFETY: Rack Mounting of Systems . . . . . . . . . . . . . . . . . 1-5

Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Installation Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Recommended Tools and Supplies . . . . . . . . . . . . . . . . . . 1-7

RapidRails Rack Kit Contents . . . . . . . . . . . . . . . . . . . . 1-7

VersaRails Rack Kit Contents . . . . . . . . . . . . . . . . . . . . 1-8

Removing the Rack Doors . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Marking the Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

Installing the RapidRails Slide Assemblies . . . . . . . . . . . . . . . . 1-11

Installing the VersaRails Slide Assemblies . . . . . . . . . . . . . . . . 1-12

Installing the System in the Rack . . . . . . . . . . . . . . . . . . . . . 1-14

Installing the Cable-Management Arm . . . . . . . . . . . . . . . . . . 1-15

Installing the Cable Tray . . . . . . . . . . . . . . . . . . . . . . . 1-15

Securing the Cable-Management Arm . . . . . . . . . . . . . . . . 1-15

Replacing the Rack Doors . . . . . . . . . . . . . . . . . . . . . . . . 1-19

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-21

1-4 Contents

Figures

Figure 1-1. RapidRails Rack Kit Contents . . . . . . . . . . 1-8

Figure 1-2. VersaRails Rack Kit Contents . . . . . . . . . . 1-9

Figure 1-3. One Rack Unit . . . . . . . . . . . . . . . . . . 1-10

Figure 1-4. Marking the Vertical Rails . . . . . . . . . . . . 1-11

Figure 1-5. Installing the RapidRails Slide Assemblies . . . . 1-12

Figure 1-6. Installing the VersaRails Rail Assemblies . . . . . 1-13

Figure 1-7. Installing the System in the Rack . . . . . . . . . 1-15

Figure 1-8. Installing the Cable-Management Arm . . . . . . 1-16

Figure 1-9. Installing the System Status Indicator Cable

(If Applicable) . . . . . . . . . . . . . . . . . 1-17

Figure 1-10. Routing the Power Cords . . . . . . . . . . . . 1-18

Rack Installation Guide 1-5

Safety Instructions

Use the following safety guidelines to ensure your own personal safety and to help protect your

system and working environment from potential damage. For complete safety information,

see the

Product Information

Guide

SAFETY: Rack Mounting of Systems

Observe the following precautions for rack stability and safety.

Systems are considered to be components in a rack. Thus, "component" refers to any system as well

as to various peripherals or supporting hardware.

CAUTION: Installing systems in a rack without the front and side stabilizers installed could cause the

rack to tip over, potentially resulting in bodily injury under certain circumstances. Therefore, always

install the stabilizers before installing components in the rack.

After installing system/components in a rack, never pull more than one component out of the rack on its

slide assemblies at one time. The weight of more than one extended component could cause the rack

to tip over and injure someone.

NOTE: Your system is safety-certified as a free-standing unit and as a component for use in a rack

cabinet using the customer rack kit when both the rack cabinet and rack kit were designed for your

system. The installation of your system and rack kit in any other rack cabinet has not been approved by

any safety agencies. It is your responsibility to have the final combination of system and rack kit in a

cabinet evaluated for suitability by a certified safety agency. The manufacturer disclaims all warranties

and liability in connection with such combinations.

•

System rack kits are intended to be installed in an approved rack by trained service

technicians. If you install the kit in any other rack, be sure that the rack meets the

specifications.

• Before working on the rack, make sure that the stabilizers are secured to the rack, extended to

the floor, and that the full weight of the rack rests on the floor. Install front and side stabilizers

on a single rack or front stabilizers for joined multiple racks before working on the rack.

• Always load the rack from the bottom up, and load the heaviest item in the rack first.

• Make sure that the rack is level and stable before extending a component from the rack.

• Use caution when pressing the component rail release latches and sliding a component

into or out of a rack; the slide rails can pinch your fingers.

• After a component is inserted into the rack, carefully extend the rail into a locking position,

and then slide the component into the rack.

• Do not overload the AC power supply branch circuit that provides power to the rack.

The total rack load should not exceed 80 percent of the branch circuit rating.

• Ensure that proper airflow is provided to components in the rack.

• Do not step on or stand on any system/component when servicing other components

in a rack.

1-6 Rack Installation Guide

Installation Instructions

This installation guide provides instructions for trained service technicians installing one or more

systems in an open-frame relay rack or in a rack cabinet. The RapidRails™ rack kit can be installed

without tools in manufacturer’s rack cabinets that have square holes; the VersaRails™ rack kit can

be installed in most industry-standard rack cabinets that have square or round holes. The

procedures for installing both RapidRails and VersaRails rack kits are similar. One rack kit is

required for each system installed in the rack.

CAUTION: Do not install rack kit components designed for another system. Use only the rack kit for

your Dell system. Using the rack kit for another system may result in damage to the system and personal

injury.

NOTE: If your system is a tower version, you must install a tower-to-rack conversion kit. Instructions

for installing this kit are included in a separate document.

The RapidRails rack kit can be installed in most industry-standard rack cabinets.

NOTICE: The VersaRails rack kit is intended to be installed by trained service technicians in a rack that

meets the specifications of American National Standards Institute (ANSI)/Electronic Industries

Association (EIA) standard ANSI/EIA-310-D-92, International Electrotechnical Commission (IEC) 297, and

Deutsche Industrie Norm (DIN) 41494. One rack kit is required for each system that is installed in a rack.

Before You Begin

Before you begin installing your system in the rack, carefully read the safety instructions found

at the beginning of this guide, as well as the safety instructions found in your system’s

Product

Information Guide

for additional information.

CAUTION: When installing multiple systems in a rack, complete all of the procedures for the current

system before attempting to install the next system.

CAUTION: Rack cabinets can be extremely heavy and move easily on the casters. The cabinet has no

brakes. Use extreme caution while moving the rack cabinet. Retract the leveling feet when relocating

the rack cabinet. Avoid long or steep inclines or ramps where loss of cabinet control may occur. Extend

the leveling feet for support and to prevent the cabinet from rolling.

Important Safety Information

Observe the safety precautions in the following subsections when installing your system in the rack.

CAUTION: You must strictly follow the procedures in this document to protect yourself as well as

others who may be involved. Your system may be very large and heavy, and proper preparation and

planning are important to prevent injury to yourself and to others. This becomes increasingly important

when systems are installed high up in the rack.

Rack Stabilizer Feet

CAUTION: Installing systems in a rack without the front and side stabilizer feet installed could cause

the rack to tip over, potentially resulting in bodily injury under certain circumstances. Therefore,

always install the stabilizer feet before installing components in the rack.

Rack Installation Guide 1-7

CAUTION: After installing systems in a rack, never pull more than one system out of the rack on its

slide assemblies at one time. The weight of more than one extended system could cause the rack to tip

over and cause injury.

The stabilizer feet help prevent the rack from tipping over when a system or other component is

pulled out of the rack with the slide assemblies fully extended. See the documentation provided

with the rack cabinet for instructions on installing and anchoring the stabilizer feet.

Installation Tasks

Installing a rack kit involves performing the following tasks in their numbered order:

Removing the rack doors

Marking the rack (if necessary)

Installing the rail assemblies in the rack:

• RapidRails installation

• VersaRails installation

Installing the system in the rack

Installing the cable-management arm

Routing cables

Replacing the rack doors

Recommended Tools and Supplies

• A #2 Phillips screwdriver

• A T-10 Torx driver (if installing the tower-to-rack kit)

• Masking tape or a felt-tip pen, for use in marking the mounting holes to be used

• A measuring ruler or tape measure

RapidRails Rack Kit Contents

The RapidRails rack kit includes the following items (see Figure 1-1):

• One pair of RapidRails slide assemblies

• One cable-management arm

• One cable-management arm retainer

• One cable tray

1-8 Rack Installation Guide

Figure 1-1. RapidRails Rack Kit Contents

VersaRails Rack Kit Contents

The VersaRails rack kit includes the following items (see Figure 1-2):

• One pair of VersaRails slide assemblies

• One cable-management arm

• One cable-management arm retainer

• One cable tray

• Eight 10-32 x 0.5-inch flange-head Phillips screws

NOTE: The nonmetric screws described in illustrations and in procedural steps are identified by size and

number of threads per inch. For example, a #10 Phillips-head screw with 32 threads per inch is identified

as a 10-32 screw.

RapidRails slide assemblies

cable-management arm

cable tray

cable-management arm retainer

system status indicator cable

(if applicable)

Andere Handbücher für PowerEdge 1800

Inhaltsverzeichnis

Sprachen:

Andere Dell Server Handbücher

Dell

Dell PowerEdge 1655MC Bedienungsanleitung

Dell

Dell External OEMR T710 Bedienungsanleitung

Dell

Dell EMC VxFlex Ready Node 14G Bedienungsanleitung

Dell

Dell PowerEdge T610 Bedienungsanleitung

Dell

Dell PowerEdge R520 Bedienungsanleitung

Dell

Dell DX6012S Bedienungsanleitung

Dell

Dell Wyse 7030 Bedienungsanleitung

Dell

Dell PowerEdge C8000 Bedienungsanleitung

Dell

Dell EMC E39S Series Handbuch

Dell

Dell PowerVault 735N Stücklistenhandbuch

Dell

Dell DL4300 Bedienungsanleitung

Dell

Dell PowerEdge 2800 Bedienungsanleitung

Dell

Dell Wyse ThinOS T10 Bedienungsanleitung

Dell

Dell PowerEdge C6320p Bedienungsanleitung

Dell

Dell PowerEdge R715 Bedienungsanleitung

Dell

Dell PowerEdge R630 Bedienungsanleitung

Dell

Dell 6100 Bedienungsanleitung

Dell

Dell PowerEdge R905 Bedienungsanleitung

Dell

Dell PowerEdge M630 Bedienungsanleitung

Dell

Dell DSS 1500 Bedienungsanleitung

Dell

Dell PowerEdge 1855 Bedienungsanleitung

Dell

Dell POWEREDGE Cluster FE655WI Montageanleitung

Dell

Dell PowerEdge UPS 500T Bedienungsanleitung

Dell

Dell PowerEdge M630 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung

Fujitsu

Fujitsu PRIMERGY BX900 Bedienungsanleitung

Asus

Asus RS700DA-E6 PS4 Bedienungsanleitung

Vertiv

Vertiv Avocent ACS6000 Montage- und Wartungsanleitung

A & T Internationale

A & T Internationale Xserve Service-Handbuch