DENTSPLY SmartLite Focus Bedienungsanleitung

Compact Pen-Style, LED Curing Light

Kompakte LED-Polymerisationslampe im „Pen-Style“

Lampe LED à photopolymériser. Format stylo compact

Lampada fotopolimerizzatrice a LED compatta a forma di

penna

Lámpara LED de polimerización compacta tipo bolígrafo

Компактная светодиодная полимеризационная лампа

в форме ручки

SmartLite®FOCUS curing light

1.1

1.2

1.3

4.1

Back to previous view

III

SmartLite®FOCUS curing light – operation at a glance

3.1

3.2

Back to previous view

SmartLite®FOCUS curing light – operation at a glance

Back to previous view

Instructions for Use _____________________________________________ 2

Gebrauchsanweisung ___________________________________________ 14

Mode d’emploi _________________________________________________ 26

Istruzioni per l’uso ______________________________________________ 38

Instrucciones de uso _____________________________________________ 50

Инструкция по применению ____________________________________ 62

Русский Español Italiano Français Deutsch English

Compact Pen-Style, LED Curing Light

1 Product description

The SmartLite® FOCUS curing light is a cordless pen-style, LED light polymerization

device for use by trained dental professionals in dental ofﬁces or dental laboratories.

SmartLite® FOCUS curing light is characterized by:

• Small size and lightweight ergonomic design.

• Compact cordless design with convenient handling features and exchangeable

battery pack.

• Smart battery charging mechanism with nearly permanent light operating avail-

ability.

• Individually adjustable LED tip, rotatable by 330°.

• LED tip design providing maximum light output.

• Polymerization area (optic effective cross-sectional area) of minimum 7.5 mm in

diameter.

• Up to 20 seconds curing time per activation with audible signal every 10 seconds.

• Advanced heat management system allowing use for both direct and indirect res-

torations.

Instructions for Use English

CAUTION: For dental use only.

USA: Rx only.

Content Page

1 Product description ..................................................................................................2

2 Safety notes .............................................................................................................. 4

3 Step-by-step instructions ........................................................................................ 6

4 Hygiene ......................................................................................................................7

5 Maintenance ............................................................................................................... 9

6 Reorder information, technical data, warranty terms .........................................10

1.1 SmartLite®FOCUS curing light 1 – operation at a glance

1.1.1 ON/OFF key 1.1

• Starts or disrupts the 20-second curing cycle.

1.1.2 Battery light

• Permanently green 1.2 : (only indicated when SmartLite® FOCUS curing light

handpiece is inserted into the charging base 3 ): SmartLite® FOCUS curing light

is fully recharged.

• Flashing green 1.2 : (only indicated when SmartLite® FOCUS curing light hand-

piece is inserted into the charging base 3 ): SmartLite® FOCUS curing light is in

normal recharging mode.

• Fast ﬂashing green 1.2 : (only indicated when SmartLite® FOCUS curing light

handpiece is inserted into the charging base 3 ): SmartLite® FOCUS curing light

is in quick recharging mode.

• Flashing yellow 1.3 : SmartLite® FOCUS is almost discharged and needs re-

charging. At ﬁrst occurrence minimum 2 minutes curing time left.

• Permanently yellow 1.3 : SmartLite® FOCUS curing light is fully discharged (no

curing time left) and needs recharging.

1.1.3 Audible signals

• One blip: At start of curing cycle, after 10 seconds curing time, and when Smart-

Lite® FOCUS curing light is fully recharged.

• Two blips: After 20 seconds consecutive curing time. Curing light automatically

extinguishes after 20 seconds.

• Repetitive short blip every 7 seconds together with ﬂashing yellow battery

light: Only occurs when device is turned off. At least 2 minutes operation time left

at ﬁrst occurrence. Device needs recharging.

• Repetitive short blip every 20 seconds together with permanent yellow bat-

tery light: Only occurs when device is turned off. Device is fully discharged and

needs recharging.

1.2 Indications

• Intra-oral light-curing of direct restorative materials, adhesives, and sealants

which cure at a wavelength of 460-490 nm.

• Adhesive luting of light-transmissive indirect restorations with luting material cur-

ing at a wavelength of 460-490 nm.

1.3 Contraindications

• Use in patients prone to photobiological reactions (including patients with solar

urticaria or erythropoietic protoporphyria) or those currently undergoing treatment

with photosensitizing pharmaceuticals.

2.1 Warnings

Never modify SmartLite® FOCUS or any of its equipment. Any modiﬁcation may com-

promise safety and effectiveness.

2.1.1 SmartLite® FOCUS Handpiece 1

• Always make sure SmartLite® FOCUS Shields 6 are securely ﬁxed to SmartLite®

FOCUS to avoid accidental aspiration (see Procedure D for details).

• Always make sure light aperture is not covered by SmartLite® FOCUS Shields (see

Figure D3 and Figure D4 ).

• Do not try to remove LED tip from handpiece as they are permanently connected.

• Do not use the device as a tissue retractor, as this may damage the connection

between LED tip and handpiece.

• Do not use a damaged device, e.g. if among others the glass cover of the LED tip

is scratched, broken or missing.

• The SmartLite® FOCUS Shields will wear over time. Exchange defect shield against

spare shields included in the package or available as reﬁll (see also [6.1Acces-

sories]).

• Only authorized technicians should repair the handpiece or battery pack.

2.1.2 Charging base 3

• High voltages are present inside the charging base. Do not open charging base

when connected to power source. Use only under dry conditions. Do not use if the

charging base is wet. Only authorized technicians should repair the charging base.

• Do not use for voltages different from the range indicated on the charging base.

• Note: Unplug power connector 4 from power source before disconnecting

power connector from the charging base.

• Always make sure handpiece is completely reprocessed before inserting it into the

charging base.

2.2 Precautions

This product is intended to be used only as speciﬁcally outlined in these Instructions

for Use.

Any use of this product inconsistent with these Instructions for Use is at the discretion

and sole responsibility of the dental practitioner.

• Anyone with a history of retinopathy should consult their eye specialist before op-

erating this unit. Use the SmartLite®FOCUS curing light extremely carefully and

comply with all the necessary safety precautions (including wearing suitable, light

ﬁltering safety glasses).

• Anyone who has had a cataract operation may be especially sensitive to light and

should be advised against undergoing treatment with a SmartLite®FOCUS curing

light unless adequate safety precautions are taken such as wearing suitable, light

ﬁltering safety glasses.

2 Safety notes

Be aware of the following general safety notes and the special safety notes in other

chapters of these Instructions for Use.

Safety alert symbol.

• This is the safety alert symbol. It is used to alert you to potential

personal injury hazards.

• Obey all safety messages that follow this symbol to avoid possible

injury.

1 For technical details (on electromagnetic emissions and electromagnetic immunity) see:

www.dentsply.eu – chapter: IFU/MSDS.

• Do not use a SmartLite® FOCUS curing light which has not been properly reproc-

essed. Protect SmartLite® FOCUS curing light from gross contamination by apply-

ing the single use SmartLite® Sleeves. SmartLite® Sleeves are intended for single

use only. Discard after use. Do not reuse sleeves in other patients in order to

prevent cross-contamination.

• For electrical medical devices speciﬁc safety precautions apply which have to be

observed 1. Do not use mobile phones or other portable communication tools, as

they could interfere with the function of SmartLite® FOCUS curing light.

• Never aim the light directly at unprotected soft tissues, as this may cause injury or

irritation. Do not aim the light at eyes. Light reﬂected from the tooth surface may

also injure eyes. Use the SmartLite® FOCUS Shields supplied with the unit or suit-

able, light ﬁltering safety glasses.

• Limit the action of the light to the area being treated.

• All dental curing lights cause a certain degree of heat development. Extended

operation in areas near the pulp and soft tissues may result in severe damage. Do

not cure the same tooth surface for more than 20 seconds at a time. If required,

polymerize at intermitting intervals of 20 seconds each.

3 Step-by-step instructions

3.1 Installation and charging ( Procedure A and Procedure B )

1. Remove ﬂoor panel 3.1 of charging base by lifting ﬂoor panel at its back end

(see Figure B2 ).

2. Connect jack 4.1 to charging base socket 3.2 (see Figure B3 ).

3. Close ﬂoor panel (see Figure B4 ) and plug in power connector 4 .

4. Make sure power socket used for power connector is accessible at all times in

case of necessary emergency disconnection.

5. Insert battery pack 2 into SmartLite® FOCUS handpiece 1

(see Figure A2 and Figure A3 ).

6. SmartLite® FOCUS battery pack is pre-charged and ready to use upon purchase.

7. To recharge the battery, insert the handpiece 1 into the charging base

3 (see Figure B5 ). The battery light will be ﬂashing green, indicating battery is

recharging.

The SmartLite® FOCUS quick recharging mode allows a minimum of 5 minutes op-

erating time after 10 minutes recharging.

3.2 Operation

1. Protect LED tip from gross contamination by applying the single use SmartLite®

Sleeves (see Procedure C ).

2. Use the SmartLite® FOCUS Shields supplied with the unit in combination with

mounted SmartLite® Sleeves or use suitable, light ﬁltering safety glasses (see

Procedure D ). Always make sure SmartLite® FOCUS Shields are securely ﬁxed to

SmartLite® FOCUS to avoid accidental aspiration. Always make sure SmartLite®

FOCUS Shields are properly mounted on SmartLite® FOCUS without covering the

light aperture (see Figure D3 and Figure D4 ).

3. Adjust the LED tip: The LED tip is rotatable by 330°, thus the position of light

emission may be individually adjusted. The LED tip must be adjusted to an angle

that allows optimal curing of the restoration. The LED tip should be positioned as

closely as possible to the restoration and may even touch the restoration as

the LED tip is protected by the SmartLite® Sleeves.

4. Polymerization: Brieﬂy press the ON/OFF key [1.1.1 ON/OFF key]. Audible opera-

tion signals are described in [1.1.3 Audible signals].

5. To stop curing light before the end of the 20 second cycle, press ON/OFF key at

any time. To cure a restorative material that requires a curing time longer than

20 seconds, repeat activation by pressing the ON/OFF key after the end of each

20-second curing cycle (see also [2.2 Precautions]).

6. Curing times for a range of DENTSPLY materials are outlined in the Curing Guide

provided. When using other products, please refer to respective product’s in-

structions for use.

Andere Handbücher für SmartLite Focus

Inhaltsverzeichnis

Sprachen:

Andere DENTSPLY Dentalgeräte Handbücher

DENTSPLY

DENTSPLY DeTrey SmartLite PS Bedienungsanleitung

DENTSPLY

DENTSPLY EndoActivator Handbuch

DENTSPLY

DENTSPLY Triad 2000 Gebrauchsanweisung

DENTSPLY

DENTSPLY DeguDent Cercon mill Bedienungsanleitung

DENTSPLY

DENTSPLY Midwest Tradition 750045 Bedienungsanleitung

DENTSPLY

DENTSPLY Multimat Easy Bedienungsanleitung

DENTSPLY

DENTSPLY DETECT APEX LOCATOR Bedienungsanleitung

DENTSPLY

DENTSPLY AutoMate III Bedienungsanleitung

DENTSPLY

DENTSPLY Biodent K+B Plus Bedienungsanleitung

DENTSPLY

DENTSPLY SmartLite PS Handbuch

DENTSPLY

DENTSPLY Cavitron Handbuch

DENTSPLY

DENTSPLY Cavitron Plus Ultrasonic Scaler Handbuch

DENTSPLY

DENTSPLY Rhino XE K-Style Bedienungsanleitung

DENTSPLY

DENTSPLY X-SMART Endo Motor Bedienungsanleitung

DENTSPLY

DENTSPLY ProMix 400 Montageanleitung

DENTSPLY

DENTSPLY CEREC MC X Konfigurationshandbuch

DENTSPLY

DENTSPLY Cavitron JET Handbuch

DENTSPLY

DENTSPLY ORTHORALIX 9200 Bedienungsanleitung

DENTSPLY

DENTSPLY trubyte Lucitone FRS Bedienungsanleitung

DENTSPLY

DENTSPLY Spectrum 800 Series Bedienungsanleitung

DENTSPLY

DENTSPLY Midwest E Handbuch

DENTSPLY

DENTSPLY X-SMART Bedienungsanleitung

DENTSPLY

DENTSPLY Midwest E Electric Handpiece System Handbuch

DENTSPLY

DENTSPLY CAVITRON 2001 Handbuch

Beliebte Dentalgeräte Handbücher anderer Marken

Vatech

Vatech EzRay Air VEX-P300 Bedienungsanleitung

KaVo

KaVo GENTLEpower LUX Contra-angle 25 LP Bedienungsanleitung

LM ProPower CombiLED Bedienungsanleitung

Owandy Radiology

Owandy Radiology RX-AC Bedienungsanleitung

mectron

mectron Piezosurgery Bedienungsanleitung

Belmont

Belmont CREDIA G1 Bedienungsanleitung

Planmeca

Planmeca Sovereign Classic Bedienungsanleitung

Bego

Bego Fornax T Bedienungsanleitung

Renfert

Renfert SYMPRO Kurzanleitung

Ateco

Ateco AT-301 Bedienungsanleitung

Nevadent

Nevadent NZPS 3 A1 Bedienungsanleitung

Dentatus

Dentatus Nyström Bedienungsanleitung

OMS

OMS DUKE EASY Handbuch

OMS

OMS LINEA PATAVIUM Handbuch

BRYANT DENTAL

BRYANT DENTAL Ignis Gesture A-494322 Bedienungsanleitung

Dekema

Dekema AUSTROMAT 664 iSiC Bedienungsanleitung

NSK

NSK Primado2 Bedienungsanleitung

Renfert

Renfert Basic classic Bedienungsanleitung